2014 Ponsse Scorpion with H7 Harvesting Head. Hour meter reads 17,136 hours. 2017 H7 harvesting head with new head module & wire harness. Includes a 2014 H7 complete parts head that needs bushings. 710/45-26.5 tires are estimated at 70%, includes a set of tracks estimated at 60%, can remove the set for $5,000 off the current price. New dryer, expansion valve, and blower. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse Scorpion King with Ponsse H7 Harvesting Head. Hour meter reads 17,103 hours. 710/45-26.5 tires are estimated at 70%. H7 harvesting head is in good condition. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2014 Ponsse Scorpion King with H7 Harvesting Head. Hour meter reads 13,641 hours. Mercedes Benz OM936 engine. Trelleborg 710/45-26.5 LS 2 tires are estimated at 70%. Includes a set of tracks that are estimated at 80%. Crane and center section are tight. Ponsse H7 harvesting head is in good condition, measuring system is in working order. Fire Suppression, Webasto Preheat, & Stump Spray systems. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2020 Ponsse Scorpion Harvester with Ponsse H7 Head. Hour meter reads 7,500 hours. One owner operator. 710/45-26.5 tires estimated at 80%, includes two sets of tracks estimated at 55%. Cab swing bearing was just done at the dealer under warranty. No welds anywhere. Webasto preheater, fire suppression, & automatic greaser. Very well-maintained machine. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2005 Ponsse Ergo with Ponsse H73E Harvester Head. Hour meter reads 24,285 hours. Newer Opti 4G computer is integrated for GPS. Newer head pump input seal 150 hours ago. Heated seat. Boom and center are good. Lots of parts included, bars, chains, counter sensor, joystick buttons & switches. Like new tracks are available for an additional cost. Webasto preheat. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.