Ponsse Harvesters/Processors For Sale
Featured in Ponsse
| Photo |
Title
|
Make | Model | Year | Price |
|
Ponsse Scorpion King with Ponsse H7 Harvesting Head2015 Ponsse Scorpion King with Ponsse H7 Harvesting Head. Hour meter reads 17,103 hours. 710/45-26.5 tires are estimated at 70%. H7 harvesting head is in good condition. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron or Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | - |
$269,000
|
|
2020 Ponsse ErgoThis is a super nice machine, that has 4506 hrs on it, It comes with 1 set of tracks , as well as some spare parts. The H8 head works great and is in very nice shape! The enclosed cab is in very nice shape and is nice and clean. There is a Webasto pre heater installed on this unit. The tires are Nokian Forest King 710/45-26.5, they are at 80%. The Daimler AG/Mercedes Benz engine runs strong, and The Trans has 3 speed forward and 3 speed reverse. We do take trades and we can assist with trucking and financing as well! Thank you For looking |
- | - | - |
$395,000
|
|
Ponsse H7 Processor heads.Must sell soon please make offer! Ponsse H7 Processor heads. We have 1 for parts and 1 complete. does not include computer controls. Drive motor on arm resealed Drive motor on main frame Saw motor Rotator Main Hydraulic Valve Other parts priced upon request. |
Ponsse | H7 | - |
Call for Price
|
|
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Ponsse | Cobra HS10 | 1998 |
$38,500
|
|
Ponsse Ergo Processor with H73 Processing Head1998 Ponsse Ergo with H73 Processing Head. Hour meter reads 22,000 hours. CAT engine starts and runs good. 700 tires are estimated at 70%. Tight center, bucket, and boom. Cab leveling doesn't work. Bogies are in good working order. Good turn table. Indexator and rear boomswing motor has been removed. H73 processing head is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 1998 |
$28,500
|
|
Ponsse Ergo with Ponsse H73 Processing Head2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2002 |
$49,000
|
|
Ponsse Ergo with H7 Harvesting Head2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo with H7 Head | 2004 |
$198,500
|
|
Ponsse Ergo Harvester with H7 Harvesting Head2005 Ponsse Ergo 6 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 13,491 hours. Refurbished by Ponsse in 2016 & 2022. 710/45-26.5 tires are estimated at 75%. Front tires are estimated at 70%. Includes a set of tracks estimated at 70%. Auto-grease and webasto preheat systems. H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. New head pump. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***REDUCED $15,000*** |
Ponsse | Ergo | 2005 |
$143,000
|
|
Ponsse Ergo Harvester with H7 Head2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$99,900
|
|
Ponsse Ergo Harvester2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$85,000
|
|
Ponsse Ergo Harvester with H7 Harvesting Head2005 Ponsse 6 Wheeled Ergo with Ponsse H7 Harvesting Head. House meter reads 10,473 hours. Refurbished in 2016. 710/45-26.5 tires on the bogies are estimated at 80%, other two tires are estimated at 70%. Includes a set of tracks and chains. Webasto preheater, heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$140,000
|
|
Ponsse Ergo Harvester with Ponsse H7 Harvesting Head2007 Ponsse Ergo 6 Wheeled with H7 Harvesting Head. Hour meter reads 17,000 hours. 710/45-26.5 tires, estimated at 30%. A few bogie tires should be replaced. 700/55-34 tires are estimated at 55%. C4 crane is tight, H7 harvesting head. New upper knives, new saw motor, leveling box, head has been re-pinned and re-bushed. Updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2007 |
$99,500
|