2021 Ponsse Scorpion King with H7 Harvesting Head. Hour meter reads 7,425 hours. Two sets of 710/45-26.5 tracks, one is estimated at 40%, the other is estimated at 90%. Had a service contract for 6,000 hours. H7 harvesting head is in good condition. Webasto Preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2012 Ponsse Ergo 6w with a 2015 H7 head. 25,000 frame hours, 14,000 crane hours, 17,000 hours on engine. Head is in very good shape. Opti 4G 4.725 touchscreen cpu. Machine has been extremely well cared for, 2nd owner is retiring. 710/55-34 tires estimated at 70%, 710/45-26.5 tires estimated at 50%. One set of tracks at 30%. New A/C pump, dryer and expansion valve. New alternators, pulleys and auto tensioner. New starter. Main hydraulic has been replaced. Very little welding on the machine. Head has been reinforced with an AR 400 steel plate and hard facing. Crane base line bored winter 2026. Swing box rebuilt 2026. Includes many spare parts with machine - 4 fluid filled bogie tires on rims, 2 rear tires on rims, resealed auto tensioning system for head, feed wheels, knives, crane valve bank, H7 valve bank, swing gear box, boom extension cylinder, several rebuilt cylinders for head, splitter box, radiator, muffler, new alternator, original cpu along with components and modules, working hydraulic pump and motor for drive system. Various fittings, o-rings, and seals. Too many more to list. Estimated value of spare parts is $40,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2015 Ponsse Scorpion King with 2023 Ponsse H8 Harvesting Head. Hour meter reads 18,000 hours, with a new Mercedes Tier IV engine that has less than 1,000 hours. Three out of four pumps have been done, harvester, drive, and boom. Boom cylinders and stabilization cylinders were both redone. 710/45-26.5 tires are estimated at 60%. Includes two sets of Olofsfors Eco tracks. Webasto preheater, heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

2023 Ponsse Ergo H8 variable speed head, Active frame, 1566 Hours, Very nice machine Trades welcome $565,000.00

2005 Ponsse Ergo Harvester with Ponsse H7 Head. Refurbished in 2014. Hour meter reads 13,158 hours. 710/45-26.5 tires are estimated at 50%, rears are estimated at 60%, includes a set of tracks and chains. Newer used bearing in the crane, new bushings where it pins to the frame. Ponsse rebuilt the gearbox for the crane, and rebuilt rear-end in the bogies less than a year ago. Clutch in the gearbox between the engine and clutch was replaced, with new seals in the hydraulic pumps. Webasto preheater. Comfort controls. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.