Ponsse Harvesters/Processors For Sale
Featured in Ponsse
| Photo |
Title
|
Make | Model | Year | Price |
|
2020 Ponsse ErgoThis is a super nice machine, that has 4506 hrs on it, It comes with 1 set of tracks , as well as some spare parts. The H8 head works great and is in very nice shape! The enclosed cab is in very nice shape and is nice and clean. There is a Webasto pre heater installed on this unit. The tires are Nokian Forest King 710/45-26.5, they are at 80%. The Daimler AG/Mercedes Benz engine runs strong, and The Trans has 3 speed forward and 3 speed reverse. We do take trades and we can assist with trucking and financing as well! Thank you For looking |
- | - | - |
$395,000
|
|
Ponsse Ergo Harvester with a H73E Head2006 Ponsse Ergo Harvester with a H73E Head. This equipment has a Mercedes Benz engine, runs and starts good, strong hydraulics and drive system, cylinders and valve banks are in good working order. Tight boom and base, squirt boom is in good condition, bogie and axles are in working order. H73E and measuring system are in good condition. 710 rear tires @ 50%. Heat, A/C, and new lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
- | - | Unknown |
$Call for Price
|
|
Ponsse Scorpion King with Ponsse H7 Harvesting Head2015 Ponsse Scorpion King with Ponsse H7 Harvesting Head. Hour meter reads 17,103 hours. 710/45-26.5 tires are estimated at 70%. H7 harvesting head is in good condition. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron or Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | - |
$269,000
|
|
Ponsse Ergo Harvester with Ponsse H7 Head2018 Ponsse Ergo 8 Wheel Harvester with H7 Head. Hour meter reads 11,700 hours. 710/45-26.5 tires are estimated at 75%, includes a set of Olofsfors tracks estimated at 75%. H7 harvesting head is in good condition, C5 crane. Owner operator. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2018 |
$365,000
|
|
Ponsse Scorpion King with H7 Processing Head2015 Ponsse Scorpion King with H7 Processing Head. Hour meter reads 14,912 hours. Mercedes engine. 710/45-26.5 tires are estimated at 75%. Two sets of tracks included are estimated at 65%. C50 crane. Center section was redone in late 2023. Pins and bushings have been done every year in the head. New expansion pins in the center. Leveling cab sensors were done in 2023. Webasto preheater. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | 2015 |
$217,500
|
|
Ponsse Ergo with Ponsse H73 Processing Head2002 Ponsse Ergo with Ponsse H73 Processing Head. Engine runs well. Machine has several cylinders, hoses and fittings leaking. 700/55-34 and 700/50-26.5 tires @ 30%. HN 125 Crane. Sheet metal fairly straight. Pins and bushings in decent condition. Machine is working and cutting wood. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2002 |
$49,000
|
|
Ponsse Ergo Harvester with Ponsse H7 Harvesting Head2007 Ponsse Ergo 6 Wheeled with H7 Harvesting Head. Hour meter reads 17,000 hours. 710/45-26.5 tires, estimated at 30%. A few bogie tires should be replaced. 700/55-34 tires are estimated at 55%. C4 crane is tight, H7 harvesting head. New upper knives, new saw motor, leveling box, head has been re-pinned and re-bushed. Updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2007 |
$99,500
|
|
Ponsse Scorpion with H7 Processing Head2021 Ponsse Scorpion with H7 Processing Head. Hour meter reads 4,399 hours. 710/45-26.5 tires are estimated at 80%. C50 crane and H7 harvesting head, feed motors, feed wheels, & knives are in good condition. Webasto preheater. Boom and center are tight. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Ponsse | Scorpion | 2021 |
$415,000
|
|
Ponsse H7 Processor heads.Must sell soon please make offer! Ponsse H7 Processor heads. We have 1 for parts and 1 complete. does not include computer controls. Drive motor on arm resealed Drive motor on main frame Saw motor Rotator Main Hydraulic Valve Other parts priced upon request. |
Ponsse | H7 | - |
Call for Price
|
|
Ponsse Ergo with H8 Processing Head ***ON HOLD***2023 Ponsse Ergo with H8 Processing Head. Hour meter reads 155 hours. Mercedes Benz OM 926 engine. 710/45-26.5 tires are estimated 95%. Includes two sets of tracks. Webasto preheat system. Ponsse C5 squirt boom. Ponsse H8 processing head is in great condition, measuring system in good working order. Heat, A/C, LED lights, lunch cooler & heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***ON HOLD*** |
Ponsse | Ergo | 2023 |
$669,500
|
|
Ponsse Ergo with H8 Harvesting Head2022 Ponsse Ergo with H8 Harvesting Head. Hour meter reads 2,200 hours. 710/45-26.5 tires are estimated at 90%. Set of tracks are like new. Active frame, C5 crane, with H8 harvesting head. Lunch heater/cooler and AutoMat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2022 |
$575,000
|
|
Ponsse Ergo 6 Wheeled with 2021 H8 Head2014 Ponsse Ergo 6 Wheeled with 2021 H8 Head. Hour meter reads 15,902 hours. C5 crane with internal hoses, 2021 H8 Head with minimal use, harvester pump and and updates to crane at 14,000 hours. Color marking stump spray system. Tires estimated at 80%. Auto-grease & webasto preheat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Ponsse | Ergo | 2014 |
$Call for Price
|