2014 Ponsse Ergo 6 Wheeled with 2021 H8 Head. Hour meter reads 15,902 hours. C5 crane with internal hoses, 2021 H8 Head with minimal use, harvester pump and and updates to crane at 14,000 hours. Color marking stump spray system. Tires estimated at 80%. Auto-grease & webasto preheat. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

2020 Ponsse Scorpion King Harvester. 5,400 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2018 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 8,450 hours. 710/45-26.5 tires are estimated at 70%. C5 crane is tight, H8 harvesting head is in good condition. One owner operator machine. Webasto preheater. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2005 Ponsse Ergo Harvester with H7 Head. This machine has many new parts. Mercedes Benz engine, runs and starts good, strong hydraulics and cylinder. Recently new crane pump. Crane has been repined and bushings top to bottom. New center pins. New injectors and head gasket. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.