Featured in Sawmill Equipment
| Photo |
Title
|
Make | Model | Year | Price |
|
Baker Products 3674D Sawmill2019 Baker Products 3674D Sawmill. Hour meter reads 1,535 hours. Deutz 74hp. 20' capacity, unit is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Baker Products | 3674D | 2019 |
$88,500
|
|
Buhler 500 HP Pellet MillBuhler 500 HP Pellet Mill. Includes parts manual. Unit is in good working condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Buhler | 500 HP | - |
$107,500
|
|
CAM-WOOD WP-20L-V4X 4-Sided Planer/Moulder2020 CAM-WOOD WP-20L-V4X 4-Sided Planer/Moulder. 20" wide x 4" high capacity (3/4"–20" width; 3/8"–4" thickness, 8" optional). Variable feed 20–80 FPM driven by dual 2 HP VFD feed motors; floating infeed rolls for smooth feeding. Cutterhead motors: 15 HP top & 15 HP bottom; 10 HP right & 10 HP left (all 5,000 RPM). 60 mm spindles; max cutting depth: top/bottom 1/2", sides 1". Digital positioning with HMI touch screen for width, thickness, and cutter head height; hard-chrome precision ground table. Includes slip-on spiral/profile cutterheads; left & right heads with HAR series profile heads; new cutter head on the machine. Electrical: 480V, 60 Hz, 3-phase. Machine size/weight approx.: 76" L x 52" W x 71" H; 4,920 lbs. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
CAM-WOOD | WP-20L-V4X | 2020 |
$15,000
|
|
CME Mill C4 Pellet CoolerCME Mill C4 Pellet Cooler. Never put to use. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
CME Mill | C4 | - |
$54,500
|
|
CME SLR Bag SealerCME SLR Bag Sealer. New, never used. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
CME | SLR | - |
$21,500
|
|
Desjardins Shingle MillDesjardins Shingle Mill. 40 HP 3 phase motor. Conveyor. Grinder for the blades. Includes an edger and extra blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Desjardins | - | Unknown |
$15,000
|
|
Desjardins Shingle Mill1980s Desjardins Shingle Sawmill. Stored inside, 3 owners, very minimal use. Original paint on the machine, power unit was redone. Can be ran off 3 phase. Can separate the sawmill from the power unit if the potential buyer does not need the power unit, power unit is on the it's on frame. Has packing boxes, blowers, and some spare parts. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Desjardins | Shingle Mill | 1980 |
$14,000
|
|
Edmiston Sawmill1997 Edmiston Hydraulic Sawmill. 22' Edmiston log deck with stop and load. Carriage is a 42" opening. The head is brand new. This sawmill has been covered it's whole life. A/C, joystick controls. Contact Erik @ Red Pine Equipment 218-720-0933. Sawmill is located in Northcentral USA. |
Edmiston | Hydraulic Sawmill | 1997 |
$89,500
|
|
J.B. Sedberry 125 HP Hammer MillJ.B. Sedberry 125 HP Hammer Mill. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
J.B. Sedberry | 125 HP | - |
$27,500
|
|
Jackson SawmillJackson Sawmill. Mill saw with cab, log deck, take away belts, green chains, 2 cut offs, and a homemade shavings mill. Includes 3 saws. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Jackson | - | - |
$53,500
|
|
Meadows 4"x30" EdgerMeadows 4"x30" Edger. Electric motor. Hydraulic controls. 20' frame length with infeed and outfeed tables. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast. |
Meadows | 4"x30" | - |
$32,000
|
|
Meadows Mills #2 Sawmill1988 Meadows Mills #2 Sawmill. 350 kva Cummins generator. Everything is electric & runs off the generator. $55,000 for the mill, generator, & panels. 26" Montgomery wood hog can be included for an additional $33,500. Contact Erik @ Red Pine Equipment 218-720-0933. Sawmill is located in Northeast USA. |
Meadows | Mills #2 | 1988 |
$55,000
|