Bandit Chippers For Sale
Featured in Bandit
| Photo |
Title
|
Make | Model | Year | Price |
|
Bandit 15XP TK Track Chipper2024 Bandit 15XP TK Track Chipper. Hour meter reads 1,300 hours. CAT 174hp engine. 37" diameter drum - 2 knife split pocket 5/8" chip. CAT 305 rubber track undercarriage is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 15xp tk | 2024 |
$139,500
|
|
Bandit 19XPC Track Chipper ***ON HOLD***2022 Bandit 19XPC Track Chipper. Hour meter reads 246 hours. John Deere 173hp diesel engine. Caterpillar 305CR rubber track undercarriage. 19" chipping capacity, includes remote control, with tether back-up. Drum is in good condition with 4 knives. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. ***ON HOLD*** |
Bandit | 19XPC | 2022 |
$160,000
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Bandit Intimidator 15XP Chipper2020 Bandit Intimidator 15XP Chipper. Hour meter reads 560 hours. Ford 165hp gas engine. Winch & electric powered jack. Garage kept, includes an extra set of knives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | Intimidator 15XP | 2020 |
$60,000
|
|
Bandit 12XP Chipper with Winch2018 Bandit 12XP Chipper with Winch. Hour meter reads 1,145 hours. PSI 3.0L 90 HP gas engine. 12" capacity and 24" drum, 14.25"x17" throat opening. Unit is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 12XP | 2018 |
$31,000
|
|
Bandit 2290T Track Chipper2018 Bandit 2290T Track Chipper. Hour meter reads 1,493 hours. Volvo 550 HP engine. Rubber padded single grouser tracks, remote control. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 2290T | 2018 |
$339,500
|
|
Bandit 200XP Chipper2016 Bandit 200XP Chipper. Hour meter reads 1,250 hours. Perkins 85 HP gas engine. 12" chipping capacity, 14"x17" throat opening. Hydraulic lift and crush cylinder. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 200XP | 2016 |
$15,000
|
|
Bandit 2290TK Track Chipper ***ON HOLD***2015 Bandit 2290TK Track Chipper. Hour meter reads 4,850 hours. John Deere RG6135 525hp engine. Newer clutch with around 750 hours. 24" single grouser pads, undercarriage is estimated at 75%. Drum is in good condition. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Bandit | 2290TK | 2015 |
$Call for Price
|
|
Bandit 2290 Track Chipper2014 Bandit 2290 Track Chipper. Hour meter reads 3,002 hours. CAT C15 engine, 540hp, pre-DEF. Newer drum bearings. Drum and feed table are in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 2290 | 2014 |
$185,000
|
|
Bandit 2590 Chipper2012 Bandit 2590 Chipper. This chipper has a CAT C-15, 540 HP Engine, hour meter reads 4,633 hours and is still in use. Newer remote control kit, exhaust manifold, turbo, and clutch discs. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 2590 | 2012 |
$175,000
|
|
Bandit 3590XL Whole Tree Chipper2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA |
Bandit | 3590XL | 2010 |
$Call for Price
|
|
Bandit 1850 Track Chipper2006 Bandit 1850 Track Chipper. Hour meter reads 6,025 hours. Cummins 330 HP engine. One owner chipper. Loader works as it should. Undercarriage is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 1850 | 2006 |
$69,900
|
- 1
- 2