Sprout Waldron Pellet Mill. This is a turnkey Pellet Making Operation. The grinder system includes a bin for loading shavings to feed the hammer mill. The hammer mill, feed conveyor, and auger in the feed bin are controlled with sensing units so that the mill cannot be over fed and jam up. As the amps on the hammer mill climb the feed auger slows, when the amps reach a pre-set limit the feed conveyor stops to allow the hammer mill to catch up. This is all 3 phase 240v components. The hammer mill has a ¼” screen, which is the correct size for the pellet system. It has a 40 HP motor. There is a small 220v blower which takes the feed stock out of the chamber, the hammer mill fills and feeds it into the hopper above the pellet mill. There is a 30’ out feed conveyor that the pellets fall onto out of the pellet mill, which also has a variable speed control and is reversible. There are misc. spare parts included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Desjardins Shingle Mill. 40 HP 3 phase motor. Conveyor. Grinder for the blades. Includes an edger and extra blade. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2020 CAM-WOOD WP-20L-V4X 4-Sided Planer/Moulder. 20" wide x 4" high capacity (3/4"–20" width; 3/8"–4" thickness, 8" optional). Variable feed 20–80 FPM driven by dual 2 HP VFD feed motors; floating infeed rolls for smooth feeding. Cutterhead motors: 15 HP top & 15 HP bottom; 10 HP right & 10 HP left (all 5,000 RPM). 60 mm spindles; max cutting depth: top/bottom 1/2", sides 1". Digital positioning with HMI touch screen for width, thickness, and cutter head height; hard-chrome precision ground table. Includes slip-on spiral/profile cutterheads; left & right heads with HAR series profile heads; new cutter head on the machine. Electrical: 480V, 60 Hz, 3-phase. Machine size/weight approx.: 76" L x 52" W x 71" H; 4,920 lbs. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

2008 Wood-Mizer EG200 Twin Blade Edger. Hour meter reads 285 hours. Perkins diesel engine. Trailer package. Has been stored under a roof. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA.

1988 Meadows Mills #2 Sawmill. 350 kva Cummins generator. Everything is electric & runs off the generator. $55,000 for the mill, generator, & panels. 26" Montgomery wood hog can be included for an additional $33,500. Contact Erik @ Red Pine Equipment 218-720-0933. Sawmill is located in Northeast USA.

Stenner VHM 36 Band Resaw. Very good condition. Electric, 36" wheels, 2" blade. 5-6 blades included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.