2026 Multitek 3040XP2 Firewood Processor. Hour meter reads 40 hours. 3-phase electric 480v electric. 16-way splitter. 72" circular saw. Extended live deck. Multitek disc screener. Setup includes a 30' belt conveyor and 40' belt swivel conveyor. Plumbed for a Multitek AFS splitter. Heat, A/C, radio, lights on cab. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA.

New Model 18 BAB "The Firewood Factory" Nothing Eats Wood Like A Beaver!! Bigger, stronger, and faster than its predecessor, the model 18 BAB is a true “animal” powered by either a Kohler CH999 gas engine and equipped with a Parker VOAC 7135 rpm saw motor, 404 18H 24” true harvester combination - this is by far the fastest cut/split combi-nation on the market. A typical 18” hardwood log is cut in 3-4 seconds and splits in 3-4 seconds or less!!! It’s a drag race to see which finishes its job first! The 18 BAB comes standard with almost everything – choose how you plan to “feed the beast” (Live deck, dead deck, or log lift), that’s it. If you need to get your production into the 3+ cords per hour range, the 18 BAB is one Bad A** Beaver!

New Hahn Mini-Pro 250/B Firewood Processor The Hahn Mini-Pro 250/B is a professional grade firewood processor in a compact package. Hahn has been manufacturing quality USA made machinery for over 50 years, and like all Hahn products, the Mini-Pro firewood processor is built to withstand the rigors of daily firewood production. The Mini-Pro comes standard with many features including a 2-strand live deck, 12’ hydraulically pivoting conveyor, 25HP Honda EFI motor & an “offset” splitter design including a positive log stop & automated tip tray for accurate measuring & more control when dropping blocks into the splitting chamber. The 250/B is the most user friendly processor on the market and has standard features to make cutting & splitting firewood, faster & easier, than other small firewood processors. Specifications - 25 HP Honda EFI with remote start & throttle - 12’ Conveyor with hydraulic raise/lower & left/right swing allows to load into 3 totes, 3 bags or fill a trailer without moving - 20” max log diameter - 24” max block length - 1-3 full cords per hour Standard Features - Offset splitter design - Automated tip-tray for supporting the last piece and for ensuring blocks fall correctly into splitting chamber - Hydraulic positive stop/butt plate for easy, fast & accurate block measuring - Hydraulic oil cooler - Compact design - Sandblasted & powder coated finish - 1 year warranty on machine & 3 year warranty on Honda engine See more specs & details at: https://www.hahnmachinery.com/mini-pro-250b-firewood-processor.html See video here: https://www.youtube.com/watch?v=eTeKIF3DKNw

2014 Multitek 1620SS Firewood Processor with 15' Conveyor. Hour meter reads 608 original hours. Two owner unit. 43HP Kubota diesel. 15' conveyor is attached and folds for transport. 40" circular saw. 6 way wedge. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.

1988 Multitek 2040 Firewood Processor with Timberwolf 24' Conveyor. Hour meter reads 7,100 hours. John Deere 4cyl engine. 3/4” bar saw and chain, shuttle grapple, 6-way wedge, & auto split. Timberwolf Conveyor has a new belt. Videos available upon request. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northeast USA. ***SOLD***

1996 Multitek 2020 LDCS Firewood Processor with 30' Conveyor. Hour meter reads 2,203 hours but frame hours are unknown. John Deere diesel engine starts and runs good. Valve bank is dry. Grapple assist is in good working order. Newer water pump, radiator, starter, bar return spring, fuel tank, and front seal. Ram and wedge adjust cylinders were just rebuilt. 3 face cords per hour. Contact Erik @ Red Pine Equipment 218-720-0933. Processor is located in Northcentral USA.