Featured in Firewood Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
Cord King 18-30 Model 40 Firewood Processor

Cord King 18-30 Model 40 Firewood Processor

2016 Cord King 18-30 Model 40 Firewood Processor. This equipment has a 60 HP CAT engine, runs and starts good, hour meter reads 600 hours, 40” carbide tooth slasher saw. Splitter Force 29 ton, 6 or 8 way fixed splitting wedge. 16' infeed with 3-leg live deck, hydraulic log stop adjustable 12-24" length. Operator platform with deluxe seat. Automatic clamping, fuel Capacity: 20-gallon fuel tank, hydraulic reservoir capacity: 55 US gallons, hydraulic oil cooler standard: 35,000 BTU/hr. 10k lbs. tandem axles with electric brakes and running lights, 2 5/16″ ball hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA.

Cord King 18-30 2016
$54,900
Basic Firewood Cleaner

Basic Firewood Cleaner

4' x 8' barrel - 1 1/2" spacing - chain drive - steel roller guides. Adjustable height & angle. Minimum 4' clearance. Discharge chute. Discharge height adjusts from 4' to 7'. In stock and available now!! Call 888-775-4883.

- - 2020
$12,000
Rapido Loco 60 Firewood Processor

Rapido Loco 60 Firewood Processor

2018 Rapido Loco 60 Firewood Processor & Blockbuster Basic Firewood Cleaner. This firewood processor has approximately 600 hours. The Blockbuster Tumbler has a 4'x8' barrel, chain driven, steel roller guides. Adjustable height and angle, wheels and hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rapido Loco Model 60 2018
$Call for Price
2015 DYNA SC-15

2015 DYNA SC-15

2015 DYNA SC-15 KOHLER GAS ENGINE, 3 STRAND HYDRAULIC FOLDING LIVE DECK, 6 WAY WEDGE, 14FT ATTACHED CONVEYOR

DYNA SC-15 Unknown
$29,500
Black Creek Model 2000B Firewood Processor

Black Creek Model 2000B Firewood Processor

Black Creek Model 2000B Firewood Processor. This machine has 39.1 hours of use, has a hydraulic operated log lift, a hydraulic conveyor for moving the logs under the saw blade to an operator determined cutoff length, a large hydraulic ram pushes the cutoff log through an adjustable splitter head that splits the cut log into 2 or 4 sections depending on the operators' choice. The lift is capable of lifting logs up to 18" diameter and 10' long without any problems. The firewood cutoff length can be adjusted between 12" and 24" in 2" increments. The processor comes with the following extras: an 11' conveyor deck, a six-way wedge, and a 23 HP Honda engine. It is easily hooked to your pick-up to move from place to place. Shipping and financing available. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Black Creek 2000B -
$19,900
HAHN HFP160 Firewood Processor Skid Steer Attachment

HAHN HFP160 Firewood Processor Skid Steer Attachment

2014 HAHN HFP160 Firewood Processor Skid Steer Attachment. This machine includes a 6 & 8 way wedge. Low hours, approximately 80 cords run through it. Contact Kelly @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Hahn HFP-160 2014
$23,500
HAHN HFP-150 Skid Steer Firewood Processor

HAHN HFP-150 Skid Steer Firewood Processor

2014 HAHN HFP-150 Skid Steer Firewood Processor. This machine has processed only approximately 100 cords or less. Recently gone through by the Hahn Factory mechanic and works as it should. Note, the previous owner painted the end orange as he almost hit his garage with it and wanted to be sure it was easy to see. Contact Kelly @ Red Pine Equipment 218-720-0933. Processor is located in Minnesota.

Hahn HFP-150 2014
$16,900
Brute Force 18-24 Firewood Processor ***SOLD***

Brute Force 18-24 Firewood Processor ***SOLD***

2017 Brute Force 18-24 Diesel Firewood Processor. This equipment has a 44 HP Kubota diesel, includes 4 & 6 way splitting wedges. Machine has approximately 800 hours. $33,900 Contact Amanda @ 715-245-2144. Processor is located in Wisconsin. ***SOLD***

Brute Force 18-24 2017
$33,900
 Brute Force 18-24 Firewood Processor

Brute Force 18-24 Firewood Processor

2016 Brute Force 18-24 Firewood Processor with 14' Conveyor. This processor has a 37 HP Kohler gas engine, 3 strand live deck, 4-way splitting wedge. Just over 300 cords processed, approximately 200 hours on machine. Contact Amanda @ 715-245-2144. Equipment is located in Wisconsin.

Brute Force 18-24 2016
$25,900
DYNA SC-16 Firewood Processor

DYNA SC-16 Firewood Processor

2018 DYNA SC-16 Firewood Processor. Hour meter reads 840 hours, CAT 51 HP engine, runs great, just serviced filters and fluids. Hydraulic log lift, lights, 6 way wedge and 4 way wedge. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

DYNA SC-16 2018
$48,500
DYNA SC-16 Firewood Processor ***SOLD***

DYNA SC-16 Firewood Processor ***SOLD***

2014 DYNA SC-16 Firewood Processor. This processor is designed for full-time, high-output production, this unit has a 44 HP Kubota diesel engine, this is upgraded to the larger ram and also has the 4.5” x 30” hydraulic ram, will push out up to 3-4 cords per hour. Rated capacity is 16” diameter logs up to 14’ long, with a maximum cut of 22”, highly portable, the DYNA SC-16 Firewood Processor is an industrial grade machine. 14' integrated conveyor will be upgraded with newer belt. Spare wedge, 5-10 bars, 10+ chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. ***SOLD***

DYNA SC-16 2014
$31,900
Cord King Model 60 Firewood Processor ***SOLD***

Cord King Model 60 Firewood Processor ***SOLD***

2000 Cord King Model 60 Firewood Processor. This processor has a Cummins 4BT engine, runs and starts good, strong hydraulics and pistons, saw blade is in good condition. Contact Erik @ Red Pine Equipment 218 -720-0933. Equipment is located in Northeast USA. ***SOLD***

Cord King Model 60 2000
$52,500