Harvesters/Processors For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	John Deere 1270E 6W Processor with Waratah 616C Head 2012 John Deere 1270E 6W Processor with Waratah 616C Processing Head. Hour meter reads 14,112 hours. John Deere 6090 engine, hydrostatic transmission. 710/55-R34 tires are estimated at 80%, 600 tires are estimated at 70%. CH7 crane is tight. New windshield & main lift cylinder. Waratah 616C - went through a full rebuild at 9,500 hours. Self leveling cab with heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	1270E	2012	$199,000
	John Deere 1270D with Waratah 480 Processing Head 2009 John Deere 1270D with Waratah 480 Processing Head. Hour meter reads 13,581 hours. John deere 6090 engine starts and runs good. 600 tires are estimated at 85%, newer brake canisters all around. Bogie tracks are included and in good condition. Espar preheater. Waratah 480 head is in good working order, Proclaim feed motors, pins and bushings are good, newer knives, & newer feed roller arms. Enclosed leveling cab has heat, A/C, lights, & radio. Well maintained machine, ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	1270D	2009	$83,500
	John Deere 1270D with John Deere 758HD Processing Head 2006 John Deere 1270D with John Deere 758HD Processing Head. Hours are estimated at 10,000 hours. John Deere 6090 engine starts and runs good. 600 tires estimated at 70%. John Deere 758HD Processing Head is in good condition. Timbermatic computer system. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	John Deere	1270D	2006	$Call for Price
	John Deere 1270D Harvester 2008 John Deere 1270D Harvester. 11,000 hours. Recent new injectors in engine which runs and starts good. H480 head has been rebuilt. 2 outer drive motors and one inner motor were rebuilt recently. Espar engine, hydraulic, and cab preheat system, strong hydraulics and cylinders, reman work pump and drive pump in the last 500 hours, tight boom and center section, stick and lift cylinders redone, bogies are in good working order, solid rear ends, 700 tires @ 50% with rear tracks, one set of chains. Feed rollers and grab arms are in good condition, Timbermatic HHM 300 computer. Heat, A/C,and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	John Deere	1270D	2008	$144,900
	John Deere 120 with Fabtek 4 Roller Head 2000 John Deere 120 with Fabtek 4 Roller Head. Hour meter reads 22,380 hours. John Deere 4045T engine, 1,200 hours on new engine, turbo, water pump, oil cooler, belts, & pullies. 24" triple grouser pads, undercarriage is estimated at 60%. Main pump and hoses were done 600 hours ago. Most cylinders have been just repacked. New wiring harnesses and 2 new encoders on head. New computer components. New leveling motors on the head, 3rd wheel measuring system is in good working order. Proheat preheat system for engine was just gone through, cab, & hydraulics. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. 2 new encoders on the head.	John Deere	120	2000	$52,500
	Hyundai 130 Processor with LogMax 750 Head 1999 Hyundai 130 Processor with a 2002 LogMax 750 Head. This equipment has a rebuilt head in 2015, brand new Cummins engine, runs and starts good, one year warranty on engine, 28" bar & chain, 26" cut, same as a 7000 LogMax, extra computer & feed rollers, undercarriage is @ 60%, strong hydraulics, tight boom, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hyundai	130	1999	$53,500
	HSM 405 H2 Steep Slope Harvester 2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	HSM	405 H2	2013	$Call for Price
	HAHN HSW 110B Self Propelled Harvester *SOLD* 1993 HAHN HSW 110B Self Propelled Harvester. This equipment starts and runs good, no major oil leaks. This machine was rebuilt in 2004 with a new crate JD engine. list of repairs, rebuilt inside long stroke/delimber cylinder, new right top knife cylinder, rebuilt cab tilt cylinder, new alternator, replaced front tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located Northeast USA. *SOLD*	Hahn	HWS 110B	1993	$45,000
	HAHN 110 Self Propelled Harvester 1984 Hahn 110 Self Propelled Harvester. This machine has a Detroit 353 engine, runs and starts good, strong hydraulics and cylinders, strong pumps, drive system is in working order, tight boom and grapple, rollers, delimber and knives are in good order, strong brakes, heavy duty tires. Also has parts machine, extra orbit motor swing gear, engine and pumps, & boom. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Hahn	110	1984	$9,900
	Fabtek FT-153 Processor with 4 Roller Head 2005 Fabtek FT-153 Processor with 4 Roller Head. This equipment runs and starts good, John Deere engine, complete over haul 3 months ago, undercarriage track rollers and sprockets updated 1 year ago, 24" triple grouser, main and final drive pumps new this last summer. Head rollers, grab arm, and saw are in good working order, having issues with measuring system, tight main boom, strong cylinders, Pro-Heat new pump, heat, A/C, decent glass. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Fabtek	FT-153	2005	$90,000
	Fabtek FT-133 with Fabtek 4 Roller Head 2001 Fabtek FT-133 with Fabtek 4 Roller Head. Hour meter reads 15,500 hours. John Deere 6068 crate engine installed 800 hours ago. New hydraulic pump, sprockets, idlers, rails, & rollers were also done at that time. 24" double grouser pads. Proheat preheat system. Boom is tight. New Parker touchscreen CPU and joysticks. New Lexan glass. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	FT-133	2001	$80,000
	Fabtek FT-133 Harvester with a Fabtek 4 Roller Head 2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Fabtek	FT-133	2000	$89,500