Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester

Ponsse Ergo Harvester

2006 Ponsse Ergo Harvester with 15,000 hours. Machine runs and starts good and is equipped with the H73E head in great working condition. Good rubber, tracks, and chains go with machine, heat, A/C, radio, and all gauges work. Machines working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2006
$165,000
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Rottne H20 with SP761 Harvesting Head

Rottne H20 with SP761 Harvesting Head

2006 Rottne H20 with SP761 Harvesting Head. Hour meter reads 10,000 hours. John Deere engine. Hydraulic pump is newer with 2,000 hours. 750 tires are estimated at 90%. 2016 SP 761 harvesting head is in good condition. Self-leveling cab with Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Rottne H20 2006
$148,000
Linkbelt 210LX Processor with Waratah 622B Head

Linkbelt 210LX Processor with Waratah 622B Head

2006 Linkbelt 210LX Processor with Waratah 622B Head. Hour meter reads 16,614 hours. 24" double grouser pads, undercarriage is estimated at 75%. Updated LogRite computer, Waratah head is only a few years old, good knives and feed wheels, measuring system in working order. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Link Belt 210LX 2006
$135,000
Rottne H20 with SP761 Processing Head

Rottne H20 with SP761 Processing Head

2006 Rottne H20 with 2015 SP761 Processing Head. Hour meter reads 19,685 hours. John Deere engine starts and runs good. 750 tires are estimated at 70%. 2015 SP761 processing head, approximately 8,000 hours. Feed wheels in good condition, no cracking, knives in good shape. Preheat. Upgraded D5 computer system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Rottne H20 2006
$132,500
2006 John Deere 703G

2006 John Deere 703G

2006 John Deere 703G Harvester. This equipment has 15,477 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 70%, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Delvin @ (715) 699-6271 or (715) 634-1555

John Deere 703g 2006
$95,000
John Deere 703G Harvester

John Deere 703G Harvester

2006 John Deere 703G Harvester. This equipment has 15,430 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 50%, new tracks, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 703G 2006
$92,500
Valmet 911.3 Harvester with a 360.2 Head

Valmet 911.3 Harvester with a 360.2 Head

2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Valmet 911.3 2006
$69,500
Ponsse Ergo 6 Wheeled Processor with H73E Head

Ponsse Ergo 6 Wheeled Processor with H73E Head

2006 Ponsse Ergo 6 Wheeled Processor with H73E Head. Hour meter reads 28,500 hours. Mercedes engine. Tires are estimated at 50%, carriers are estimated at 65%. New pinion bearing and power divider in 2021. Webasto preheat system. Opti computer system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2006
$39,900
John Deere 1270D with John Deere 758HD Processing Head

John Deere 1270D with John Deere 758HD Processing Head

2006 John Deere 1270D with John Deere 758HD Processing Head. Hours are estimated at 10,000 hours. John Deere 6090 engine starts and runs good. 600 tires estimated at 70%. John Deere 758HD Processing Head is in good condition. Timbermatic computer system. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 1270D 2006
$Call for Price
Timberking TK711HD Processor***SOLD***

Timberking TK711HD Processor***SOLD***

2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***

Timberking TK711HD 2006
$Call for Price