Featured in Harvesters/Processors

Sort By:   GridGallery
Photo Title
Make Model Year Price
John Deere 270 with Keto 525 Processing Head

John Deere 270 with Keto 525 Processing Head

1998 John Deere 270 with Keto 525 Processing Head. Hour meter reads 8,500 hours. John Deere 6068H engine starts and runs good. 32" pads, undercarriage is in good working order. Yard bucket with original teeth is included. Keto 525 processing head works as it should. It's a track-drive head, has 3,000 hours. This is a one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

John Deere 270 1998
$162,500
Timbco 415C Harvester with a Ponsse H73 Head

Timbco 415C Harvester with a Ponsse H73 Head

1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 415C 1998
$52,500
Timbco 415C Harvester with a Ponsse H73 Processing Head

Timbco 415C Harvester with a Ponsse H73 Processing Head

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Timbco 415C 1998
$47,500
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$39,500
Ponsse Cobra HS10 Harvester with a Ponsse H53 Head

Ponsse Cobra HS10 Harvester with a Ponsse H53 Head

1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Ponsse Cobra HS10 1998
$38,500
Ponsse Ergo Processor with H73 Processing Head

Ponsse Ergo Processor with H73 Processing Head

1998 Ponsse Ergo with H73 Processing Head. Hour meter reads 22,000 hours. CAT engine starts and runs good. 700 tires are estimated at 70%. Tight center, bucket, and boom. Cab leveling doesn't work. Bogies are in good working order. Good turn table. H73 processing head is in good working order. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 1998
$28,500
Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***

Eco Log 550B Processor with a Logmax 5000 Head ***SOLD***

1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Eco Log 550B 1998
$22,500
1998 Hyundai 200 Processor with Fabtek Dangle Head

1998 Hyundai 200 Processor with Fabtek Dangle Head

Great running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner

Hyundai Hyundai 200 High Walker 1998
$Call for Price
Timbco T415C Harvester with Ponsse H73 ***SOLD***

Timbco T415C Harvester with Ponsse H73 ***SOLD***

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Timbco T415-C 1998
$Call for Price