Harvesters/Processors For Sale
Photo |
Title
|
Make | Model | Year | Price |
Timbco 425 EXL Processor with Log Max 6000 Head2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 425 EXL | 2005 |
$34,500
|
|
Ponsse Ergo Harvester2005 Ponsse Ergo Harvester. Hour meter reads 15,500 hours. This unit runs and starts good, has strong hydraulics, & tight pins and bushings. Tight boom, HN125 crane, head is in good working condition. Tires are at 60% with a set of bogie tracks, carriers are at 80%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2005 |
$85,000
|
|
Tigercat 822 with LogMax 7000 Dangle Head2005 Tigercat 822 with LogMax 7000 Dangle Head. Hour meter reads 32,000 frame hours. Well maintained. 24" single grouser pads, undercarriage is estimated at 80%. LogMax 7000 dangle head is in good condition, measuring system is in working order. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | 822 | 2005 |
$51,500
|
|
John Deere 1270D with John Deere 758HD Processing Head2006 John Deere 1270D with John Deere 758HD Processing Head. Hours are estimated at 10,000 hours. John Deere 6090 engine starts and runs good. 600 tires estimated at 70%. John Deere 758HD Processing Head is in good condition. Timbermatic computer system. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 1270D | 2006 |
$Call for Price
|
|
Ponsse Ergo Harvester2006 Ponsse Ergo Harvester with 15,000 hours. Machine runs and starts good and is equipped with the H73E head in great working condition. Good rubber, tracks, and chains go with machine, heat, A/C, radio, and all gauges work. Machines working daily. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2006 |
$165,000
|
|
Timberking TK711HD Processor***SOLD***2006 Timberking TK711HD Processor with a Log Max 750 Dangle Head. This machine has a CAT 3126 engine, runs and starts good, Cat preheating system, 6,717 hours on meter, strong hydraulics and cylinders, undercarriage is in good working condition, 23.5" pads, Omron computer system, head and saw in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Timberking | TK711HD | 2006 |
$Call for Price
|
|
Linkbelt 210LX Processor with Waratah 622B Head2006 Linkbelt 210LX Processor with Waratah 622B Head. Hour meter reads 16,614 hours. 24" double grouser pads, undercarriage is estimated at 75%. Updated LogRite computer, Waratah head is only a few years old, good knives and feed wheels, measuring system in working order. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Link Belt | 210LX | 2006 |
$135,000
|
|
Rottne H20 Harvester with a Logmax 7000 Head2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Rottne | H20 | 2006 |
$162,000
|
|
John Deere 703G Harvester2006 John Deere 703G Harvester. This equipment has 15,430 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 50%, new tracks, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 703G | 2006 |
$92,500
|
|
Valmet 911.3 Harvester with a 360.2 Head ***SOLD***2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Valmet | 911.3 | 2006 |
$Call for Price
|
|
Ponsse Ergo 6 Wheeled Processor with H73E Head2006 Ponsse Ergo 6 Wheeled Processor with H73E Head. Hour meter reads 28,500 hours. Mercedes engine. Tires are estimated at 50%, carriers are estimated at 65%. New pinion bearing and power divider in 2021. Webasto preheat system. Opti computer system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Ergo | 2006 |
$39,900
|
|
2006 John Deere 703G2006 John Deere 703G Harvester. This equipment has 15,477 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 70%, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Delvin @ (715) 699-6271 or (715) 634-1555 |
John Deere | 703g | 2006 |
$95,000
|