Sort By:   GridGallery
Photo Title
Make Model Year Price
Valmet 911C Harvester with 965 Head

Valmet 911C Harvester with 965 Head

2000 Valmet 911C Harvester with 965 Head. This machine has a Cummins 6BTA engine, runs and starts good, strong hydraulics, decent cylinders few leaks, boom has some play, may need a little attention, center has a little play, head cuts and works - computer monitor is broken, decent bogies and axles, 600 tires @ 50% with tracks available, 28Lx26 tires in rear. Will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Valmet 911C 2000
$22,500
Timbco T415-D Processor with a Rolly Head

Timbco T415-D Processor with a Rolly Head

2000 Timbco T415-D Processor with a Rolly Head. This equipment has ~12,000 hours, Cummins engine, runs and starts good, strong hydraulics and cylinder, new hoses, undercarriage is @ 75%, double grouser pads, sprockets are in good order, tight boom. Rolly head and measuring system are all in good condition, new Pro Clean roller motor, heat, lights, and A/C - was just gone through. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timbco T415-D 2000
$105,500
Timbco 415 Processor with a Rolly Head

Timbco 415 Processor with a Rolly Head

2000 Timbco 415 Processor with a Rolly Head. This processor has a Cummins 6 cylinder engine. New engine and pumps. Head is in good working order, Woodland computer system, strong hydraulics and cylinders, tight boom, heat, A/C, and lights. Spare head almost complete. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415 2000
$Call for Price
Fabtek FT 133 Harvester ***SOLD***

Fabtek FT 133 Harvester ***SOLD***

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This equipment runs and starts good, strong hydraulics and drive system, undercarriage is @ 50%, tight boom. Fabtek 4 roller head is in good working order, heat, A/C, and lights. Also has extra used parts: Hydraulic pump, 2 roller motors, 2 top spindles, rollers, few rams, 2 Dallas chips, 2 new buttons for joy sticks, new solenoid for valve bank, saw motor, saw box, top knives and other misc. items. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Fabtek FT133 2000
$53,900
Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

Fabtek FT-133 Harvester with a Fabtek 4 Roller Head

2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Fabtek FT-133 2000
$Call for Price
John Deere 653G Harvester

John Deere 653G Harvester

2000 John Deere 653G Harvester with a 4 Roller Head. Hour meter reads 17,100 hours, John Deere 6068 engine, runs and starts good, decent feed rollers and grab arms, has a few leaks, strong hydraulics and drive system, just went through the tilt cylinders, undercarriage is in good working order, tight boom, measuring system works as it should, head has a little play. Heat, A/C needs a charge, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

John Deere 653G 2000
$Call for Price
Valmet 911 Processor with a 965 Dangle Head

Valmet 911 Processor with a 965 Dangle Head

2001 Valmet 911 Processor with a 965 Dangle Head. This machine has a 5.9 Cummins engine, runs and starts good, 18,000 hours, newer valve cover gaskets, new batteries, new slew gear on cab, strong hydraulics and cylinders, new link where head connects. New computer screen, head will need some rewiring. Tight boom, bogies are in good order, tires are @ 40%. Heat, A/C needs a charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Valmet 911 2001
$44,500
Timberjack 1270C Harvester with a 480 Waratah Head

Timberjack 1270C Harvester with a 480 Waratah Head

2001 Timberjack 1270C Harvester with a 480 Waratah Head. This machine has a Cummins 8.3 engine, runs and starts good, newer pump 5,000 hours ago, squirt boom, strong hydraulics and cylinders, bogies are in good order, center section has a new top pin, new front glass, ProHeat. new crane module and display module, new left joystick. Heat works as it should, has a Timberjack 3000 computer. 700 tires @ 50% with a set of Eco tracks. A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timberjack 1270C 2001
$48,500
Timbco 415D Harvester with a Logmax 7000 Head

Timbco 415D Harvester with a Logmax 7000 Head

2001 Timbco 415D Harvester with a Logmax 7000 Head. This machine has a rebuilt Cummins 5.9 engine installed 1,500 hours ago, updated to a brand new Timberpro swing motor. Undercarriage has been gone through, rollers, rails, sprockets, new rock guard. Tight boom, 10' Northfork squirt boom in good working order, Logmax 7000 head has good rollers and knives - no topping saw, grab arms are in good order, 380 Logmax computer. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timbco 415D 2001
$99,000
CAT 311 Harvester with a Fabtek 4 Roller Head

CAT 311 Harvester with a Fabtek 4 Roller Head

2001 CAT 311 Harvester with a Fabtek 4 Roller Head. This machine has a new CAT engine, runs and starts good, strong hydraulics and cylinders, newer undercarriage with 2,500 hours, 22" pads, tight boom. Fabtek 4 roller head has new spikes on rollers, new chains, grab arms and hoses are in good working order, Upton computer, 33" Jet fit bar. Heat, A/C, and lights, air ride seat, good glass, quick couplers. Forestry Package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CAT 311 2001
$68,500
Ponsse Ergo Harvester with H73 Head

Ponsse Ergo Harvester with H73 Head

2001 Ponsse Ergo Harvester with H73 Head. This machine has a newer good running Mercedes engine, runs and starts good, about 400 hours on the engine. Boom base was rebuilt, tight boom, strong hydraulics and cylinders, main pump was just resealed, center section is in working order, bogies are in good condition, 700 tires 30 with tracks, H73 head and measuring system are in good working order. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2001
$88,500
John Deere 1270D Processor

John Deere 1270D Processor

2002 John Deere 1270D Processor. Owner stated that this processor has 9,600 hours, 8.2L John Deere engine, runs and starts good, has been well maintained, Timberjack 762C processing head in good working order, strong hydraulics, tight pins and bushings center and boom, tires are @ 85%, tracks and chains in very good condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 1270D 2002
$100,000