Sort By:   GridGallery
Photo Title
Make Model Year Price
Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

Timbco 415B Harvester with a 2 Roller Fabtek 18" Head

1996 Timbco 415B Harvester with a Fabtek Roller II 18" Head. This machine has a new undercarriage in Nov. 2017 - is @ 95%, spring 2017: new seat, joysticks, front window, and LED lights on front . New Parker Denison pumps in 2015 and new pump drive in 2015. John Deere engine was rebuilt in 2012, 8,500 hours on it at that time, everything but the injectors and turbo, as the previous owner had just replaced them. Newer injectors and turbo on it in fall 2017. Has a revamped 2 roller Fabtek head 18" with on board L 90 Parker valves, High Country Tech computer. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415B 1996
$55,900
John Deere 490E Processor with Fabtek 4 Roller Head *SOLD*

John Deere 490E Processor with Fabtek 4 Roller Head *SOLD*

1996 John Deere 490E with Fabtek 4 Roller Head. This machine has a new 4 cylinder John Deere engine 2,000 hours ago. Cab has heat, A/C & Pro-Heater, many spare parts to go with, spare saw motor, new roller bearings, new chain, spare brain box. Well maintained machine, oil has been changed every 200 hours, tight controls, and always greased. Estimated 12,500 frame hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 490E 1996
$45,900
Timberjack 2618 Processor

Timberjack 2618 Processor

1997 Timberjack 2618 Processor. This machine has 7,429 hours, 8.3L 6CT Cummins motor complete rebuild 457 hours ago, pumps tested and are all within specs, both planetary drives rebuilt, undercarriage is at 30%, sprocket is worn, machine has a 2000 Logmax 750 dangle head, but is still plumed for hot saw, boom pins are tight with no slop, leveling pins have a little play but not bad. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

Timberjack 2618 1997
$57,500
Timberjack 608 Processor with a Logmax 650 Head *SOLD*

Timberjack 608 Processor with a Logmax 650 Head *SOLD*

1997 Timberjack 608 Processor with a Logmax 650 Head. This equipment has a newer Cummins 5.9 engine with ~4,000 hours, runs and starts good, strong hydraulics and cylinders, undercarriage is @ 60%, 24" pads, Logmax head is in good working order, has a 392 Logmate computer, strong pumps, pins and bushings are in good working order, tight boom and head, heat, A/C, and block heater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Timberjack 608 1997
$50,000
1998 Hyundai 200 Processor with Fabtek Dangle Head

1998 Hyundai 200 Processor with Fabtek Dangle Head

Great running machine ,Fabtek forestry package, High walker, forestry cab, 1 owner

Hyundai Hyundai 200 High Walker 1998
$Call for Price
Timbco 415D Processor with a 2005 Rolly II Head

Timbco 415D Processor with a 2005 Rolly II Head

1998 Timbco 415D Processor with a 2005 Rolly II Head. This machine has a Cummins engine, runs and starts good, has some blow by, spare Cummins 5.9 engine to go with the machine as well, strong hydraulics and drive system, new pump, cylinders are in good order, swing gear and swing motor are all in good working condition, undercarriage is @ 50% 24" pads double grouser, head was just gone through, newer Woodland IFM computer system, heat, A/C has a compressor. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Timbco 415D 1998
$72,500
Timberjack 1270B Harvester

Timberjack 1270B Harvester

1998 Timberjack 1270B Harvester. This machine has ~7,000 hours, International DT 466 engine, runs and starts good, strong hydraulics, pumps have been updated, 762B head, decent rollers and grab arms, will need a new wiring harness from machine, computer works, tight boom, bogies are in good order, tight center section, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Timberjack 1270B 1998
$43,500
John Deere 690ELC Processor

John Deere 690ELC Processor

1998 John Deere 690ELC Processor with a Waratah HTH 20 622 Head. This equipment was just gone through approximately 3,000 hours ago, engine, hydraulic pumps and undercarriage. This processor has 16,500 frame hours, tight boom, head is in good working condition, new computer, swing gear is in good condition, heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 690ELC 1998
$69,500
Eco Log 550B Processor with a Logmax 5000 Head

Eco Log 550B Processor with a Logmax 5000 Head

1998 Eco Log 550B Processor with a Logmax 5000 Head. This processor has many new parts on the Logmax head, new main pump in 2013, rebuilt pump drive assembly this spring, both drive pumps have been gone through, all fluids changed this spring, four chains, tires are @ 70%, new crank bearings this spring and new piston rings, 15,000 hours. Machine is only used for 6 months of the year for the past three years, seasonal operation. Comes with spare hoses, filters, and any other misc. parts associated with it, also has brand new parts for the head. A/C does not work, heater does, has a 24 volt system. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Eco Log 550B 1998
$106,500
Kobelco SK200 Harvester

Kobelco SK200 Harvester

1998 Kobelco SK200 with the Waratah HTH20 Harvester Head. This machine runs and starts good, tight boom, undercarriage is in good working order, hoses on the attachment and the cylinder on the attachment has a leak, but the excavator runs strong. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA.

Kobelco SK200 1998
$34,900
Hyundai 180 Carrier with Fabtek 4 Roller Head

Hyundai 180 Carrier with Fabtek 4 Roller Head

1998 Hyundai 180 Carrier with Forestry Package and Fabtek 4 Roller Head. This machine has newer computer wiring harness, newer pump. 8,600 hours, runs and starts good, tight boom and head, undercarriage is @ 90%, triple grouser, rebuilt Rex Roth pump, Cummings engine, heat and A/C, Wabasco heater, Sure Grip Control, feed roller and grab arms are in good order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Hyundai 180 1998
$65,000
Ponsse HS16 Processor with a H73 Head

Ponsse HS16 Processor with a H73 Head

1998 Ponsse HS16 Processor with a H73 Head. This machine has a CAT 3116 engine, runs and starts good, has been reworked, 1,300 hours on rebuilt transmission, new drive pumps, strong hydraulics, and cylinders. Tight center section, bogies are in good order, brake bands and seals all NEW. Newer front differential. 600 tires with chains, heat, A/C, and lights. H73 head, new center feed roller, others are in good working condition, strong grab arms and cylinders, measuring system is in good order. Also comes with H53 head, Ponsse just installed new feed motor, saw bearing and saw motor seal and sprocket on this head. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse HS16 1998
$Call for Price