Harvesters/Processors For Sale

2014 Ponsse Ergo 8 Wheeled Processor with 2020 H7 Head. Hour meter reads 12,180 hours. Mercedes Benz OM 926 engine. 710 tires are estimated at 80%. One set of tracks can be included for additional cost. Fire suppression system, C4 crane, strong hydraulics and cylinders. Webasto preheat system. Very well maintained and tight. 2020 Ponsse H7 head has been used for one season, it's in great condition. Heat, A/C, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2010 Ponsse Ergo with 2015 Ponsse H7 Processing Head. Hour meter reads 23,257 hours. Mercedes engine starts and runs good. 710/55R34 tires on the front are estimated at 70%, 710/45-26.5 tires on the rear are estimated at 50%, includes a set of like new tracks at 90%. Webasto preheat and auto-grease systems. C4 crane. 2015 Ponsse H7 processing head that has been completely rebuilt besides the valving. Ponsse went through the machine in 2022. New swing motor, lift cylinders, pins, bushings, rotator, & hoses. Updated center section with frame lock cylinders. Heat, A/C, radio, comfort grip control and updated computer. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2022 Ponsse Ergo 8 Wheeled Harvester with Ponsse H8 Harvesting Head. Hour meter reads 3,189 hours. 710/45-26.5 front & rear tires are estimated at 90%. Pewag tracks are estimated at 90%. C5 crane is in good condition, boom is tight, hoses are good. Ponsse H8 harvesting head, no welds or cracks. Feed wheels, knives, and hood are in good condition. Few hoses could be replaced. Webasto preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2000 Ponsse Cobra HS10 with H73E Harvesting Head. Hour meter reads 4,500 hours, frame hours are unknown. CAT engine starts and runs good. 700 tires are estimated at 50%. Rear set of tracks included but not pictured are estimated at 50%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

2013 Linkbelt 210X2 Processor with Southstar QS500 Head. This machine has 9,691 hours, runs and starts good, head reseal & major cylinders have been done, dry machine, newer main hydraulic pump, undercarriage is in good working order, tight boom, head is in good working condition, heat, A/C, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.