Harvesters/Processors For Sale

1999 Timberjack 1270B Harvester with a 762C Head. This unit has an International DT 466 engine, runs and starts good, preheat system, &strong hydraulics and cylinders. Pump and hydrostats are in good working order, joystick controls, one joystick has been recently rebuilt, tight boom, boom base has new bearings. 762C head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass installed recently. 600 tires with tracks and chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1999 Timberjack 1270B with 762C Processing Head. Hours are estimated at 22,500 hours. DT 466 engine, hydrostatic transmission. 700/55-34 & 700/50-26.5 tires are estimated at 75%. Newer main pressure and pilot valves. Tight center, pins, & bushings. Squirt boom. Timberjack 3000 computer system. 762C processing head has newer saw assembly, bearing, & auto chain tightener. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

2005 Timbco 425 EXL Processor with Log Max 6000 Head. Hour meter reads 23,250 hours. Cummins 8.3L engine is a reman. 24" single grouser pads, undercarriage is estimated at 10%, will need sprockets, rails, & rollers. Hydraulic pump and implement pumps have 3,000 hours on them. Measuring wheel was just rebuilt, computer is newer. Log Max 6000 processing head has good feed wheels and measuring system is in good working order. Needs a new rotator. Espar preheat system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

2002 Tigercat 845B with Log Max 7000C Head. Hour meter reads 14,090 hours. Cummins 8.3 engine starts and runs good. 24" double grouser pads, sprockets and rails are estimated at 85%, pads estimated at 50%. Espar engine preheat system. Log Max 7000C is a 2004, feed & roller wheels work well. Cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD***