Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Ergo Harvester with H7 Head

Ponsse Ergo Harvester with H7 Head

2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2008
$115,000
2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH TRACKED HARVESTER 6 CYL DEERE

John Deere 703JH 2014
$119,000
2007 JOHN DEERE 1270D

2007 JOHN DEERE 1270D

2007 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE 600 RUBBER

John Deere 1270D 2007
$119,000
John Deere 1270E Harvester with a H480C Head

John Deere 1270E Harvester with a H480C Head

2011 John Deere 1270E Harvester with a H480C Head. John Deere 6 cyl. engine, 500 hours on a complete overhaul. Strong hydraulics and cylinders, hydraulic pump was changed out at 5,600 hours. Center section is tight, squirt boom works as it should, rotating & leveling cab. Auto lube, pre heater. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

John Deere 1270E 2011
$119,500
Ponsse Ergo Harvester with H7 Harvesting Head

Ponsse Ergo Harvester with H7 Harvesting Head

2012 Ponsse Ergo 8 Wheeled Harvester with H7 Harvesting Head. Hour meter reads 17,500 hours. 710/45-26.5 tires are estimated at 50%, one tire could be replaced. Newer Webasto preheater. Auto-grease system. Bottom section of the valve bank was recently rebuilt, two new lower knives, H7 harvesting head is in good working order. Upper center has some slack and could be rebuilt. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Ponsse Ergo 2012
$120,000
2016 TN725C Timberpro

2016 TN725C Timberpro

This unit has all guards and glass in good shape, as well as the AC is nice and cold. It does have an Eberspacher pre heater in it and it has forward and reverse , Hi-Low Range. and Hydraulic brakes. The under carriage is at roughly 40% and has 23 3/4 " pads. We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!

- - 2023
$129,500
John Deere 1470E with H290 Processing Head

John Deere 1470E with H290 Processing Head

2010 John Deere 1470E with H290 Processing Head. Hour meter reads ~16,000 hours. John Deere 6090H engine starts and runs good. Very dry engine bay, no leaks or buildup. 750/55-26.5 tires on the rear are at 55%. 700/70R34 tires on the front are at 80%. This machine has a tight and dry center section and boom. AFEX fire suppression system, Webasto preheater, self-leveling cab, & Timbermatic computer system. H290 processing head is in good shape, feeders and roller work as they should. Owner operated. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 1470E 2010
$131,500
Rottne H20 with SP761 Processing Head

Rottne H20 with SP761 Processing Head

2006 Rottne H20 with 2015 SP761 Processing Head. Hour meter reads 19,685 hours. John Deere engine starts and runs good. 750 tires are estimated at 70%. 2015 SP761 processing head, approximately 8,000 hours. Feed wheels in good condition, no cracking, knives in good shape. Preheat. Upgraded D5 computer system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Rottne H20 2006
$132,500
Linkbelt 210LX Processor with Waratah 622B Head

Linkbelt 210LX Processor with Waratah 622B Head

2006 Linkbelt 210LX Processor with Waratah 622B Head. Hour meter reads 16,614 hours. 24" double grouser pads, undercarriage is estimated at 75%. Updated LogRite computer, Waratah head is only a few years old, good knives and feed wheels, measuring system in working order. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Link Belt 210LX 2006
$135,000
 John Deere 225C with Ryans DS28C Dangle Head

John Deere 225C with Ryans DS28C Dangle Head

2004 John Deere 225C with Ryans DS28C Dangle Head. Hour meter reads 12,000 hours. 32" triple grouser pads, undercarriage is estimated at 75%. Hydraulic pump was just replaced. SureGrip joystick controls, heat, A/C, radio. Includes bucket. All reasonable offers considered. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 225C 2004
$138,500
2007 CAT 501HD

2007 CAT 501HD

2007 CAT 501HD TRACKED HARVESTER 6 CYL CAT FOUR ROLLER HEAD INDEPENDENT COUNTER

CAT 501HD 2007
$139,000
John Deere 703JH with Waratah 622B Processing Head

John Deere 703JH with Waratah 622B Processing Head

2009 John Deere 703JH with Waratah 622B Processing Head. Hour meter reads 18,126 hours. John Deere 6081H engine. 24" single grouser pads, undercarriage is estimated at 65%. Espar preheat system. Suregrip joystick controls, heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2009
$139,500