Chippers For Sale
Featured in Chippers
| Photo |
Title
|
Make | Model | Year | Price |
|
Bandit 1400 Chipper1995 Bandit 1400 Chipper. Cummins 6BT engine. Infeed chains and disc are in good shape. All hoses were recently replaced. New belts. Very good shape internally, grapple is tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 1400 | 1995 |
$32,500
|
|
Bandit 1850 Track Chipper2006 Bandit 1850 Track Chipper. Hour meter reads 6,025 hours. Cummins 330 HP engine. One owner chipper. Loader works as it should. Undercarriage is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 1850 | 2006 |
$109,500
|
|
Bandit 1850XP Tracked Chipper1998 Bandit 1850XP Track Chipper. Hour meter reads 4,000 hours, unknown if original. New Cummins 250hp engine and new glass. New master switch. Boom and grapple are tight. Ready for work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 1850XP | 1998 |
$81,500
|
|
Bandit 19XPC Track Chipper2022 Bandit 19XPC Track Chipper. Hour meter reads 246 hours. John Deere 173hp diesel engine. Caterpillar 305CR rubber track undercarriage. 19" chipping capacity, includes remote control, with tether back-up. Drum is in good condition with 4 knives. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Bandit | 19XPC | 2022 |
$160,000
|
|
Bandit 2290 Track Chipper2018 Bandit 2290 Track Chipper. Hour meter reads 1,493 hours. Volvo 550 HP engine. Rubber padded single grouser tracks, remote control. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 2290 | 2018 |
$350,000
|
|
Bandit 2290TK Track Chipper ***ON HOLD***2015 Bandit 2290TK Track Chipper. Hour meter reads 4,850 hours. John Deere RG6135 525hp engine. Newer clutch with around 750 hours. 24" single grouser pads, undercarriage is estimated at 75%. Drum is in good condition. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Bandit | 2290TK | 2015 |
$Call for Price
|
|
Bandit 2590 Chipper2012 Bandit 2590 Chipper. This chipper has a CAT C-15, 540 HP Engine, hour meter reads 4,633 hours and is still in use. Newer remote control kit, exhaust manifold, turbo, and clutch discs. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 2590 | 2012 |
$175,000
|
|
Bandit 280 Chipper with Grapple & Winch2005 Bandit 280 Chipper with Grapple & Winch. Hour meter reads 1,300 hours on engine, 875 hours on auto feed. Newer 275 HP engine was installed. Includes extra knives, anvil, & bolts. Pintle hitch. Rated for 18" logs but can chip bigger. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast. |
Bandit | 280 | 2005 |
$84,500
|
|
Bandit 3590XL Whole Tree Chipper2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA |
Bandit | 3590XL | 2010 |
$Call for Price
|
|
Bandit 90 Chipper with Chip Box1990 Bandit Chipper with Chip Box. Kubota 4 cyl. diesel engine. 9" chipping capacity rotary chipper, 8.5 cubic yard dump box. Dumping box is in good working order. Chipper pivots. New wiring & LED lights. Brakes are good & recently packed wheel bearings. Breakaway kit. New battery. Tandem 7,000 lb axles with 16" tires. Extra set of knives. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | - | 1990 |
$23,900
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Concept Products Shred-All 5600 Wood Chipper2006 Concept Products Shred-All 5600 Wood Chipper. This chipper was a state owned machine that was used for pallets. John Deere 6068T engine starts and runs good, 12' conveyor, 22" infeed roller diameter, 56" cutting drum, good tires and electric brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Concept Products | Shred-All 5600 | 2006 |
$90,000
|