Chippers For Sale
Featured in Chippers
Photo |
Title
|
Make | Model | Year | Price |
Concept Products Shred-All 5600 Wood Chipper2006 Concept Products Shred-All 5600 Wood Chipper. This chipper was a state owned machine that was used for pallets. John Deere 6068T engine starts and runs good, 12' conveyor, 22" infeed roller diameter, 56" cutting drum, good tires and electric brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Concept Products | Shred-All 5600 | 2006 |
$90,000
|
|
Rayco RG1220 Brush Chipper2011 Rayco RG1220 Brush Chipper. Hour meter reads 225 hours. Kubota 66.8 HP engine starts and runs good. Pre-emission engine. 12" chipping capacity with a 12"x20" in-feed opening. Intake rate of 100 fpm. Discharge swivels 360° and at a discharge height of 112". Feed wheel lift and crush handles on both sides. New battery. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rayco | RG1220 | 2011 |
$38,500
|
|
Morbark Model 23 NCL Chipper1997 Morbark Model 23 NCL Chipper. This machine has 4,200 hours, CAT 550 engine, runs and starts good. Machine was rebuilt in contractors shop 800 hours ago including the following items: new wear plates, belly pans and head liners, new clutch, new in-feed rollers, wireless remote. Chute is in good condition. Dirt separator, this chipper is in excellent shape for the age, produces a very consistent chip. Set up for 7/8" chip currently. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Morbark | Model 23 | 1997 |
$94,900
|
|
Morbark Model 16 Disc ChipperMorbark Model 16 Disc Chipper. Hour meter reads 3,500 hours. CAT 3208 engine starts and runs good. Loader with cab. Loader has a rotator for grapple installed with additional pedal. Two chutes included, one for piles and one to load trucks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | Model 16 | Unknown |
$36,500
|
|
Bandit Intimidator 15XP Chipper2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | Intimidator 15XP | 2021 |
$49,500
|
|
Precision Husky Chipper1992 Precision Husky Chipper. Hours are unknown. KT 600 HP engine starts and runs good. New batteries, oversized cables, master switch, oversized starter, pockets, knife clamps, and counter knives, digital volt meter, and re-cored radiator within the last year. New bearings in feed rear feed wheel, a few new sprockets, drive chains, drive motors for the top feed wheel, rebuilt injector pump, and new hydraulic pump belts within the last 8 months. Also has a new shaft and bearings on the bottom feed wheel. 23" throat. Will fill 42 ton in 30-40 minutes depending on the wood. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Precision | Husky | 1992 |
$60,000
|
|
Barko Dynamic DC-50 Discone Chipper2012 Barko Dynamic DC-50 Discone Chipper. Hour meter reads 36 hours. Cummins QSB 3.3L, 12" discone drum chipper. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Barko | Dynamic DC-50 | 2012 |
$33,500
|
|
Trelan DL-18 Whole Tree Chipper1985 Trelan DL-18 Whole Tree Chipper. This equipment has a CAT 3406A engine, strong hydraulics, decent cylinders. tight disc bearing, new belts, couple sets of knives. Hood 7000 loader. Infeed and drive chain are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in northcentral USA. |
Trelan | DL-18 | 1985 |
$34,000
|
|
Vermeer BC1800XL Chipper2022 Vermeer BC1800XL Chipper. Hour meter reads 310 hours. 173 HP John Deere diesel. 18in feed opening, swivel discharge chute. Knives have been flipped. Serviced at 275 hours. Brand new knife kit, filters and a spare new rim for additional cost. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Vermeer | BC1800XL | 2022 |
$82,500
|
|
Vermeer BC1500 Brush Chipper2021 Vermeer BC1500 Brush Chipper. Hour meter reads 246 hours. 15" chipping capacity, 3 knife. Cummins 3.8L diesel engine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Vermeer | BC1500 | 2021 |
$62,500
|
|
Roto Chopper B66 Chipper ***SOLD***2011 Roto Chopper B66 Chipper. This chipper has 300 hours on a complete factory recondition, new engine, C16 CAT 785 HP, runs and starts good. New drive pumps and belts. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Rotochopper | B66 | 2011 |
$Call for Price
|
|
Morbark 40/36 Whole Tree Drum Chipper2009 Morbark 40/36 Whole Tree Drum Chipper. Hour meter reads 5,500 hours. Newer CAT C15 630 HP engine has 4,000 hours. Newer style Vantage drum is in good condition. Anvil has been redone & upgraded bed chains at 4,000 hours. New clutch disc in 2022. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 40/366 | 2009 |
$177,500
|