Sort By:   GridGallery
Photo Title
Make Model Year Price
Bell Ultra C Feller Buncher

Bell Ultra C Feller Buncher

1998 Bell Ultra C Feller Buncher. This buncher has a Newer Cummins 4BT 3.9 Engine at 100 HP, 28Lx26 Tires @ 40%, new chains, hour meter reads 9,500 hours, Bell 33” directional head, head has been gone through, new pins and bushings, new hoses, strong hydraulics and cylinders. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bell - Unknown
$45,900
2001 Timberjack 608L Feller Buncher

2001 Timberjack 608L Feller Buncher

608L with Koehring side pocket hot saw, heat and that works, satellite radio! Recent rotary manifold, idlers, rollers and finals, spare head available. Ready to work. Call 406 544 7213

- - Unknown
$70,000
Barko 1080C Feller Buncher with Shear Head ***SOLD***

Barko 1080C Feller Buncher with Shear Head ***SOLD***

1992 Barko 1080C Feller Buncher with Shear Head. This machine has 2,800 hours, runs and starts good, new starter, strong hydraulics, tight controls, cylinder is in good order. 16' shear head good edge, grab arms are in working order, tires are @ 25% with tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

Barko 1080C 1992
$12,500
Bobcat 1080C Feller Buncher

Bobcat 1080C Feller Buncher

1987 Bobcat 1080C Feller Buncher. This feller buncher has a Cummins 4BT engine. According to owner, the engine starts & runs good, has strong hydraulics and cylinders, a new tilt cylinder, and the shear is set up with electric over hydraulic controls. Planetary axle is in good order, hour meter reads 9,900 hours. 16" Clark shear head with new knives; grab arms are in good working condition and tracks are newer. New 19.5 14 ply tires. Machine has heat and Lexan door. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Bobcat 1080C 1987
$18,900

Case 1187B Feller Buncher

1986 CASE 1187B Feller Buncher. This machine has a Case 504 engine, runs and starts good, strong hydraulics, newer drive motor, newer undercarriage, tracks, pads rollers have all been replaced, has spare parts from other buncher also, this machine has the 3 pump system, Hurricane 5000 20" head in working order, levelers working, boom is pretty tight has a few welds but solid, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

CASE 1187B 1986
$24,900
CASE 1187C Feller Buncher

CASE 1187C Feller Buncher

1988 CASE 1187C Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, 22" Rotto Saw Intermittent 40 degree tilt, newer undercarriage, tight pins and bushings. Runs good, hour meter reads 7,270 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

CASE 1187C 1988
$24,900
Madill 1250 Feller Buncher

Madill 1250 Feller Buncher

2007 Madill 1250 Feller Buncher. Owner stated that this unit has 6,800 hours, Isuzu 6cly engine, runs and starts good, strong hydraulics, GN 22" head, tight pins and bushings. Owner said that they just redid the bottom rollers, rest of U/C 50%, new cylinders in boom, grab arm cylinder was rebuilt, heat, A/C and lights. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***ON HOLD***

Madill 1250 2007
$112,500
Franklin 170 Feller Buncher

Franklin 170 Feller Buncher

1991 Franklin 170 Feller Buncher. Owner stated that this unit has a Detroit 453 turbo engine, runs and starts good, tight center pins and bushings, 22" sheer head in good working order. Owner said that this machine has a strong transmission, good cylinders, may need some pins in boom, tires are @ 85%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southeast USA.

Franklin 170 1991
$15,500
Franklin 170 Feller Buncher with Shear Head ***SOLD***

Franklin 170 Feller Buncher with Shear Head ***SOLD***

1986 Franklin 170 Feller Buncher with Shear Head. This equipment has a Detroit 453 engine with newer head, recently tuned up, strong transmission, hydraulics and cylinder are in good order, 18" shear head in good working condition, 23.1x 26 tires with bear claw chains, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Franklin 170 1986
$8,500
Franklin 170 Feller Buncher ***SOLD***

Franklin 170 Feller Buncher ***SOLD***

1986 Franklin 170 Feller Buncher with a 22" RotoSaw Head. This machine has a newly rebuilt 453 Detroit engine - runs and starts good, block heater, 4 speed hydrostatic transmission in good order, strong hydraulics and cylinders, few minor leaks, newer saw motor, straight disc - good teeth, 28Lx26 front tires @ 50%, rear tires have Ice chains, heat, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral. ***SOLD***

Franklin 170 1986
$19,900
Franklin 170 Feller Buncher with Shear Head ***SOLD***

Franklin 170 Feller Buncher with Shear Head ***SOLD***

Franklin 170 Feller Buncher with Shear Head. This machine has a Detroit 453 engine newer head, recently tuned up, strong transmission, hydraulics and cylinder are in good order, 18" shear head is in good working condition, 28L x 26 tires with bear claw chains, heat, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Franklin 170 Unknown
$9,900
Hydro Ax 221 Feller Buncher ***SOLD***

Hydro Ax 221 Feller Buncher ***SOLD***

1991 Hydro-Ax 221 Feller Buncher with a Timbco SW316 Saw Head. This machine has a 4 cyl. turbo John Deere engine, runs and starts good, no blow by and does not burn oil, strong hydraulics, few minor seeps, new hand clutch, drive system is in good working order, joystick controls, head has a 11 BC bar and chain, strong grab arms and accumulator, no major welds, Tires are @ 40% with DD chains @ 50%, newer saw motor, new rear tire. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Hydro-Ax 221 1991
$12,900