Sort By:   GridGallery
Photo Title
Make Model Year Price
Komatsu 430FXL Feller Buncher ***SOLD***

Komatsu 430FXL Feller Buncher ***SOLD***

2008 Komatsu 430FXL Feller Buncher with Quadco 22B 360 Degree Rotating Hot Saw. Approximately 10,500 hours on machine. Cummins 8.3 engine with newer batteries. Boom foot pin and bushing just replaced. Swing bearing bolts replaced. Newer decals. This equipment is very clean for the number of hours. No cracks or repairs to the boom or the head. Saw blade is in good shape. Grab arms have minimal play in the pins. No leaks on head. The boom pins are tight with minimal play. Hoses are in good shape no major leaks or cracking. Engine is strong with no leaks and almost no blow-by. Hydraulic system is strong and free of major leaks. Undercarriage is @ 50% Turret bolts are all new. Cab is in good shape and all functions work including A/C. Seat is in good shape, no cracked glass. The unit appears to have been well maintained and not abused. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

- 430FXL 2008
$145,000
2001 Timberjack 608L Feller Buncher

2001 Timberjack 608L Feller Buncher

608L with Koehring side pocket hot saw, heat and that works, satellite radio! Recent rotary manifold, idlers, rollers and finals, spare head available. Ready to work. Call 406 544 7213

- - Unknown
$70,000
Barko 775B Feller Buncher

Barko 775B Feller Buncher

1994 Barko 775B Feller Buncher. This machine has a Cummins 8.3 engine, runs and starts good, under 9,000 hours, strong hydraulics, charge pump and hydrostatics have been gone through, few leaks, decent center section, grab arms and accumulator arms have been re pinned and bushed recently. 22" head, straight disc good teeth. 28L x 26 tires @ 25%. Mono tracks and chains available. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 775B 1994
$27,500
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2000 Barko 885B Feller Buncher. This machine has a Cummins engine, runs and starts good, new drive motor, pretty tight center and head, strong hydraulics, head is in good working condition, tires are @ 30%, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2000
$35,900
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2003 Barko 885B Feller Buncher. This buncher has 10,512 hours, Cummins engine, runs and starts good, new pump and hydrostatic motor, new seals, tight pins and bushings, head in good working condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2003
$56,500
Barko 775B Feller Buncher with 22" Head ***SOLD***

Barko 775B Feller Buncher with 22" Head ***SOLD***

1996 Barko 775B Feller Buncher with 22" Head. This equipment has a 2013 5.9 reman Cummins engine, runs and starts good, strong hydraulics and transmission, pumps and transfer case have been gone through, decent pins and bushings. Head has new teeth on saw and spares to go with it. 2 brand new 28Lx26 tires, newer chains all around. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Barko 775B 1996
$Call for Price
Barko 1080C Feller Buncher with Shear Head ***SOLD***

Barko 1080C Feller Buncher with Shear Head ***SOLD***

1992 Barko 1080C Feller Buncher with Shear Head. This machine has 2,800 hours, runs and starts good, new starter, strong hydraulics, tight controls, cylinder is in good order. 16' shear head good edge, grab arms are in working order, tires are @ 25% with tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. ***SOLD***

Barko 1080C 1992
$12,500
Barko 775B Feller Buncher

Barko 775B Feller Buncher

1996 Barko 775B Feller Buncher. This machine has a 8.3 Cummins engine, runs and starts good. 22" head updated to Timbco Controls. Strong hydraulics, decent center section, 66x43x26 rubber, one extra tire on rim included. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Barko 775B 1996
$27,500
Bell Super T Feller Buncher with Bar Saw Head *SOLD*

Bell Super T Feller Buncher with Bar Saw Head *SOLD*

1989 Bell Super T Feller Buncher with a Bar Saw Head. This equipment has a 4 cyl. Deutz engine, hour meter reads 3,400 hours, runs and starts good, tight controls, 2 speed hydro-statics, solid boom and strong cylinders - one minor leak, 24.5x 32 tires with Bear claw chains, back tire is in good order, floor heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

Bell Super T 1989
$27,900
Bell Super T Feller Buncher

Bell Super T Feller Buncher

1992 Bell Super T Feller Buncher with Saw Head. This buncher has a Deutz engine, runs and starts good, strong hydraulics and drive system, cylinders and grab arms are in good order, has new bar and chain, 30.5x32 tires @ 50% with Bear Claw chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Bell Super T 1992
$29,950
Bell Super T with a Bar Saw Head

Bell Super T with a Bar Saw Head

1989 Bell Super T with a Bar Saw Head. This machine has a Deutz engine, runs and starts good, new saw motor, lever controls, good drive system, strong cylinders, decent grab arms and hoses, 28Lx26 tires with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Bell Super T 1989
$22,500
Bell Super T Feller Buncher ***SOLD***

Bell Super T Feller Buncher ***SOLD***

1993 Bell Super T Cutter. This equipment has a 4 cyl. Deutz engine, runs and starts good, strong hydraulics, few hose leaks, new main pump within the year, 2 speed hydrostatic - only working in work mode, solid boom. Saw head has new orbital motor, strong cylinders few weeps, 24.5 tires with dual rims, chains, extra rear wheel assemble, extra bars and chains, a few other parts, fuel pump, & new seat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Bell Super T 1993
$14,900