| Photo |
Title
|
Make | Model | Year | Price |
|
Komatsu XT430-L Feller Buncher w/ Quadco 22B 360° Head2016 Komatsu XT430-L Feller Buncher with Quadco 22B 360° Head. Hour meter reads 6,300 hours. 24" double grouser pads, undercarriage is estimated at 60%. Leveling system is in good working order, preheat sytem. Quadco 22B 360° felling head is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | XT430-L | 2016 |
$272,500
|
|
Komatsu XT430-5 with Log Max 7000XT Fixed Processing Head2020 Komatsu XT430-5 with Log Max 7000XT Fixed Processing Head. Hour meter reads 4,950 hours with a few months of warranty left. Cummins QSL9 engine, 331hp. 24" double grouser pads, undercarriage is estimated at 70%. Boom is tight. Log Max 7000XT fixed head is in good condition and working order. 7-inch LED IQAN-MD4 color touchscreen. Heat, A/C, LED lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | XT430-5 | 2020 |
$435,000
|
|
Komatsu PC250 Carrier with a Limmit 2200B Delimber1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC250 | 1994 |
$24,900
|
|
Komatsu PC210LC7 with Propac 453 Delimber2006 Komatsu PC210LC7 with Propac 453 Delimber. Hour meter reads 12,663 hours. Komatsu SAA6D102E-2 143hp engine. 24" triple grouser pads, undercarriage is estimated at 80%. Propac 453 delimber is in good working order, straight, grab arms are tight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC210LC7 | 2006 |
$66,500
|
|
Komatsu PC200LC Processor with a Waratah HTH622B Head2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Komatsu | PC200LC | 2005 |
$79,500
|
|
Komatsu PC200-LC with Propac 513 Delimber2006 Komatsu PC200LC with a ProPac 513 Delimber. This equipment starts & runs good, strong hydraulics and cylinders, undercarriage is in good order, ProPac 513 has a straight boom, good cable and roller, knives and topping saw are in good condition. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200-LC - Propac 513 | 2006 |
$Call for Price
|
|
Komatsu PC200-LC with a ProPac 453 Delimber2005 Komatsu PC200-LC with a ProPac 453 Delimber and Circular Saw. This delimber has a Komatsu engine, runs and starts good strong hydraulics, decent undercarriage, straight boom, good cables, decent knives, straight saw blade, good teeth. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200-LC | 2005 |
$57,500
|
|
Komatsu PC200 with Limmit 2000B Delimber1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Komatsu | PC200 | 1998 |
$84,500
|
|
Komatsu PC200 LC-8 with Denharco DMC4140 Delimber2008 Komatsu PC200 LC-8 with Denharco DMC4140 Delimber. Cylinders are dry. Hydraulic hoses are dry. Cummins engine. Bypass grapple & top saw on the delimber. Undercarriage at about 30%. 28" double grouser pads. New set of rails and pads that could go with. Denharco DMC4140 Delimber is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-8 | 2008 |
$42,500
|
|
Komatsu PC200 LC-6 with a ProPac 453 Delimber1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 LC-6 | 1999 |
$45,900
|
|
Komatsu PC200 LC-5 with a Denis D-3200-T Delimber1989 Komatsu PC200 LC-5 with a Denis D-3200-T Delimber. This equipment has a Komatsu engine, runs and starts good, Hour meter reads 10,594 hours, strong hydraulics and pumps. Straight boom and good cables, knives are in good working order, undercarriage is in good condition, 30" triple grouser pads. Chains and sprockets are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-5 | 1989 |
$22,500
|
|
Komatsu PC200 Delimber with a Risley 2000B Limit1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 | 1998 |
$50,000
|