Sort By:   GridGallery
Photo Title
Make Model Year Price
 Timberjack 1270D Harvester

Timberjack 1270D Harvester

2003 Timberjack 1270D Harvester. This machine has 12,800 frame hours, rebuilt 6081 Deere engine around 1,800 hours ago. Engine starts and runs good, Espar preheating system. Updated Timbermatic 300 computer system. 758 HD head in good working condition. Machine has an updated fuel tank, main crane pin is new, 1 new feed motor and the others have been changed out in the last 3,000-4000 hours. New flex plate between pump and motor, New link from boom to head 800 hours ago. 600 Rubber @ 60%. Heated leveling seat. Heat, AC, radio, and CD player. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 1270D 2003
$88,500
2003 Fabtek 344B Forwarder

2003 Fabtek 344B Forwarder

FABTEK 344B SINGLE BUNK FORWARDER 4 CYL JOHN DEERE POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM 28L-26 RUBBER

Fabtek 344B 2003
$Call for Price
2003 Timberjack 1270D Mulcher/Processor

2003 Timberjack 1270D Mulcher/Processor

This unit comes with two heads. A Palatin mulching head and the original 758HD Processing head. Overall condition is good for the year. Good interior. Seat could use a cover. Great rubber front and back. Heat & A/C. 15,197 Hours. Joystick controls. This is a very rare unit with the mulching head!!! Hydrostatic drive works great. 6081 Johnd Deere power, runs excellent!

Timberjack 1270D 2003
$89,500
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2003 Barko 885B Feller Buncher. This buncher has 10,512 hours, Cummins engine, runs and starts good, new pump and hydrostatic motor, new seals, tight pins and bushings, head in good working condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2003
$56,500
CAT 533 Feller Buncher ***SOLD***

CAT 533 Feller Buncher ***SOLD***

2003 CAT 533 Feller Buncher with a 221 Felling Head. This machine has 6,282 total hours, CAT 3126 Power, dry machine no leaks, good brakes, tight pins and bushings, 30.5x32 tires, fronts have 100 hours on them and the rears are at at 75%, brand new seat, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***REDUCED FROM $85,500.00*** ***SOLD***

CAT 533 2003
$77,500
CAT 535B D/A Grapple Skidder ***SOLD***

CAT 535B D/A Grapple Skidder ***SOLD***

2003 CAT 535B D/A Grapple Skidder with Winch. This machine runs and starts good, has a rebuilt transmission, new center section, new 30.5.32 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

CAT 535B 2003
$79,000
Fabtek 153 Processor with a Fabtek 4 Roller Head

Fabtek 153 Processor with a Fabtek 4 Roller Head

2003 Fabtek 153 Processor with a Fabtek 4 Roller Head. This machine has a John Deere 6068 6.8 liter engine, runs and starts good, 9,475 hours, strong hydraulics and cylinders, newer pump, head has been reworked, new pins and bushings, measuring system and computer are in good working order, feed rollers and chains are in good condition. One new final drive motor, undercarriage is @ 90%, double grouser pads, Pro Heat system. New radiator, new batteries, heat LED lights, A/C was just recharged. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek 153 2003
$77,950
Fabtek 344B Forwarder ***SOLD***

Fabtek 344B Forwarder ***SOLD***

2003 Fabtek 344B Single Bunk Forwarder. This machine runs and starts excellent, John Deere engine, Espar pre-heat system, new injection pump and injectors. Power Shift transmission, strong hydraulics and cylinders, tight boom, center section has very minor play. 23.1 x26 tires @ 80% with chains available. Heat, A/C, and lights. Extremely clean, dry and straight machine for it's age with no welding on frame or boom. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

Fabtek 344B 2003
$74,900
John Deere 640GIII Skidder

John Deere 640GIII Skidder

2003 John Deere 640GIII Cable Skidder. This machine has a rebuilt engine a year and a half ago, new center pin at 100%, strong hydraulics, all leaks and hoses just gone through, new bottom drive shaft, rebuilt front end, transmission just serviced, new wiring harness, extra transmission goes with, 23.1x26 tires @ 25-30% with chains and Eco tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 640GIII 2003
$52,000
John Deere 648GIII D/A Grapple Skidder

John Deere 648GIII D/A Grapple Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. Owner stated that this machine has 10,000 hours, but was rebuilt at 6,000 hours, runs and starts good. Owner said that this machine has strong hydraulics, tight pins, good bushing, heat A/C, tires 25% with ring chains in the front and ice chains in the back. This machine was well maintained. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 648GIII D/A 2003
$64,999
John Deere 653G Feller Buncher

John Deere 653G Feller Buncher

2003 John Deere 653G Feller Buncher. This buncher has a good running John Deere engine, strong hydraulics and drive system. good cylinders, hour meter reads 7,857 hours, tight pins and bushings on the boom and head, 36" pads. Head is a Waratah FS20 straight disc, grab arms are in good condition. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 653G 2003
$52,500
Morbark 30RXL Chipper  ***SOLD***

Morbark 30RXL Chipper ***SOLD***

2003 Morbark 30RXL Chipper. This machine runs and starts good, strong hydraulics, wireless remote control with tethered backup, 30” x 10’ CAT chain infeed bed (RXL ). 30” diameter chipping capacity, 83” diameter three-knife chipper disc with LH rotation, loader with cab, chipper is in good working condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***SOLD***

Morbark 30RXL 2003
$126,500