Photo |
Title
|
Make | Model | Year | Price |
Timberjack 1270B Harvester with a 762C Head1999 Timberjack 1270B Harvester with a 762C Head. This unit has an International DT 466 engine, runs and starts good, preheat system, &strong hydraulics and cylinders. Pump and hydrostats are in good working order, joystick controls, one joystick has been recently rebuilt, tight boom, boom base has new bearings. 762C head and measuring system is in good condition, 26" bar, new end coder and diameter censor, also has 3 sets of feed rollers, peeling rollers, spiked rollers and rubber rollers. Good front glass installed recently. 600 tires with tracks and chains. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 1270B | 1999 |
$39,500
|
|
Tree Farmer C5F Forwarder ***SOLD***1999 Tree Farmer C5F Forwarder. Reman Cummins 4BT engine starts and runs good. 4 speed Franklin PowerShift automatic transmission shifts well. 23.1x26 tires are estimated at 60%. 10 hours on valve bank & hydraulic pump. Franklin 4600 Magnum Loader. Heat, A/C, lights, and pilot controls. Can be sold with new tires for $68,000 or used tires for $58,000. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***SOLD*** |
Tree Farmer | C5F | 1999 |
$54,900
|
|
Timberjack 560 Grapple Skidder with Winch1999 Timberjack 560 Grapple Skidder with Winch. Cummins 5.9 engine starts and runs good. 6 speed Power Shift transmission shifts well. 30.5x32 tires, rears are at 70%, fronts are estimated at 60%. Includes a set of ring chains estimated at 80%. New harmonic balancer, cutting edge, bearings in log arch. Fresh service, fluids, and paint job. This is a well maintained machine ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Timberjack | 560 | 1999 |
$Call for Price
|
|
Timberjack 1270B with 762C Processing Head ***SOLD***1999 Timberjack 1270B with 762C Processing Head. Hours are estimated at 22,500 hours. DT 466 engine, hydrostatic transmission. 700/55-34 & 700/50-26.5 tires are estimated at 75%. Newer main pressure and pilot valves. Tight center, pins, & bushings. Squirt boom. Timberjack 3000 computer system. 762C processing head has newer saw assembly, bearing, & auto chain tightener. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Timberjack | 1270B | 1999 |
$Call for Price
|
|
John Deere 640GII Skidder1999 John Deere 640GII Cable Skidder. Hour meter reads 15,000 hours. Rebuilt John Deere 6 cyl. engine at 11,000 hours. PowerShift transmission. 23.1x26 tires are estimated at 50%. New radiator, alternator, & injectors. Winch is in good working order. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
John Deere | 640GII | 1999 |
$53,500
|
|
Hydro Ax 711 Feller Buncher1999 Hydro Ax 711 Feller Buncher. Hour meter reads 12,032 hours. John Deere 8.1L engine starts and runs good. 28Lx26 tires are estimated at 70%, one is at 15%. One brand new tire can go with for additional cost. Few pins are loose, center is tight. Chains can also be included for an additional cost. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hydro-Ax | 711 | 1999 |
$22,900
|
|
Timberjack 1010B Forwarder1999 Timberjack 1010B 6W Forwarder. Frame hours are unknown. Hour meter shows 23,000 hours, but is not working. Cummins 4BT engine starts and runs good. Double squirt boom. New center pins, line bored. 70/50-26.5 tires are estimated at 50%, the front two are agricultural tires and could be replaced. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1010B | 1999 |
$65,000
|
|
Fabtek 546B Forwarder1999 Fabtek 546B 6 Wheel Forwarder. Hour meter reads 7,399 hours. John Deere engine starts and runs good. 30.5x32 tires in the front estimated at 25%. 700 tires in the rear are estimated at 70%. Center and crane are tight. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 546B | 1999 |
$79,500
|
|
Fabtek 548C Double Bunk Forwarder1999 Fabtek 548C Double Bunk Forwarder. Hour meter reads 19,151 hours. John Deere 6 cyl. engine starts and runs good, powershift transmission. 700/50-26.5 tires are estimated at 20-40%. Supergrip grapple. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 548C | 1999 |
$83,500
|
|
John Deere 548G Skidder1998 John Deere 548G Grapple Skidder with Winch. Hour meter reads 17,743 hours. John Deere 6 cyl. engine. Lower center pins have a little slack. Windshield will be replaced before sale. 23.1x26 tires are estimated at 80%. Winch is in good working order. Heat and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 548G | 1998 |
$62,500
|
|
John Deere 540G Skidder1998 John Deere 540G Cable Skidder. This skidder has been well maintained, runs and starts good, strong hydraulics and cylinders, PowerShift transmission, strong winch with newer cable, tight center section, 23.1 x 26 tires @ 50% with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. |
John Deere | 540G | 1998 |
$54,500
|
|
John Deere 843G Feller Buncher1998 John Deere 843G Feller Buncher. Hour meter reads 12,084 hours. John Deere 6068 engine starts and runs good. 28Lx26 tires, 2 are estimated at 80%, the other 2 are estimated at 50%. Felling head is in good condition, disc and teeth are good. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 843G | 1998 |
$36,000
|