Sort By:   GridGallery
Photo Title
Make Model Year Price
Rottne H20 Harvester with a Logmax 7000 Head

Rottne H20 Harvester with a Logmax 7000 Head

2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Rottne H20 2006
$162,000
Komatsu PC200-LC with Propac 513 Delimber

Komatsu PC200-LC with Propac 513 Delimber

2006 Komatsu PC200LC with a ProPac 513 Delimber. This equipment starts & runs good, strong hydraulics and cylinders, undercarriage is in good order, ProPac 513 has a straight boom, good cable and roller, knives and topping saw are in good condition. Heat, A/C, lights, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Komatsu PC200-LC - Propac 513 2006
$Call for Price
John Deere 703G Harvester

John Deere 703G Harvester

2006 John Deere 703G Harvester. This equipment has 15,430 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 50%, new tracks, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 703G 2006
$92,500
Valmet 911.3 Harvester with a 360.2 Head ***SOLD***

Valmet 911.3 Harvester with a 360.2 Head ***SOLD***

2006 Valmet 911.3 Harvester with a 360.2 Head. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders. Tight boom and boom base, tight carrier good center section, bogies are in good working order, 710 tires, tracks are @ 70%, chains are @ 90%. 360.2 head has a new roller, grab arm and measuring wheel are in good condition. Maxi computer system, updated saw motor, GB bar system, Joystick controls. Many extra parts joysticks, extra parts head. Heat, A/C, LED lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

Valmet 911.3 2006
$Call for Price
Rottne SMV Forwarder

Rottne SMV Forwarder

2006 Rottne SMV Forwarder. Hour meter reads ~12,500 hours. John Deere 6068 Engine. Hydrostatic transmission. Tires are at 50%. Comes with set of bogie tracks. Tight center section. Bunks are straight. Strong hydraulics and grapple arms. Lights work. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Rottne SMV 2006
$110,000
Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

Prentice 384 Loader with Riley 6600 Delimber ***SOLD***

2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900. ***SOLD***

Prentice 384 2006
$Call for Price
Ponsse Wisent Forwarder

Ponsse Wisent Forwarder

2006 Ponsse Wisent 8 Wheel Double Bunk Forwarder. This machine has a Mercedes Benz engine, runs and starts good, Pro Heat, new transmission last year installed by Ponsse, new rear-end installed last fall, bogies are in good working order, tight boom and grapple, squirt boom works as it should, decent 710 tires, blade. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Wisent 2006
$110,000
Versalift Mini Lift

Versalift Mini Lift

2006 Versalift Mini Lift. Hour meter reads 2,500 hours. Kubota 3 cylinder engine. Insulated platform and upper boom. 47' working height. Bucket rotates 180°. Hydraulic hookups to run tools. New inner boom track and new insulated & bonded hoses. New teflon skid, wear plates, & filters installed and an inspection. Pistol grip control in basket and manual lower controls. Operator, & parts manuals. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Versalift Mini Lift 2006
$52,500
John Deere 2054 with Denharco DMC4140 ***SOLD***

John Deere 2054 with Denharco DMC4140 ***SOLD***

2006 John Deere 2054 with Denharco DMC4140 Delimber. This machine has ~11,000 hours on the hour meter. Strong hydraulics, strong cylinders, newer drive motor. Undercarriage is in good working condition, 28" double grouser pads. John Deere 6068T engine, Proheat, heat, A/C, lights, and radio. Denharco DMC4140 Delimber is straight, in good shape with top saw. This machine is ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 2054 2006
$Call for Price
Tigercat 610 Skidder

Tigercat 610 Skidder

2006 Tigercat 610 Grapple Skidder with Winch. Hour meter reads 10,753 hours. 30.5x32 tires are estimated at 30% with 2 sets of double diamond ice chains and dual rings. Center is tight, winch is in good working order, heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

Tigercat 610 2006
$77,500
Timbco 445EXL Feller Buncher with Quadco 2900 Head

Timbco 445EXL Feller Buncher with Quadco 2900 Head

2006 Timbco 445EXL Feller Buncher with Quadco 2900 360° Intermittent Head. Hours are unknown, meter reads 4,606 hours. 28" triple grouser pads, undercarriage is estimated at 80%. Leveling system is in good working order. Quadco 2900 Intermittent Head. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timbco 445EXL 2006
$149,500
John Deere 643H Wheel Feller Buncher with Waratah Head

John Deere 643H Wheel Feller Buncher with Waratah Head

2006 John Deere 643H Wheel Feller Buncher with Waratah Head. Hour meter reads 12,686 hours. John Deere 6068 engine. 28Lx26 tires are estimated at 70%. Waratah felling head is in good condition, minimal welds, good disc & teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA.

John Deere 643H 2006
$26,500