Photo |
Title
|
Make | Model | Year | Price |
![]() |
2008 CAT 501HD2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD |
CAT | 501HD | 2008 |
$189,000
|
![]() |
Tigercat 1055B Forwarder2008 Tigercat 1055B 8 Wheel Double Bunk Forwarder. Hour meter reads ~18,000 hours. Mercedes engine, hydrostatic transmission. 710 tires are estimated at 50%, includes a set of rear tracks that are in good condition. Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Tigercat | 1055B | 2008 |
$89,900
|
![]() |
Valmet 425EXL Harvester with Quadco 5660 Head ***SOLD***2008 Valmet 425EXL Harvester with Quadco 5660 Head. Hour meter reads 9,310 hours, newer Cummins 8.3L engine has 1,609 hours. New main auxilliary pump was installed summer of 2022. 24" single grouser pads, undercarriage is estimated at 80%, some rollers will need to be replaced. Quadco 5660 intermittent harvesting head, feed wheels and motors are in good working order. Newer main saw, rollers, bearings, gears, and ring gear. Espar preheat system, heat, A/C, & leveling cab. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southcentral USA. ***SOLD*** |
Valmet | 425EXL | 2008 |
$Call for Price
|
![]() |
Timberking TK560DS Loader with Propac 60" Slasher2008 Timberking TK560DS Loader. Hour meter reads 10,862 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberking | TK560DS | 2008 |
$50,000
|
![]() |
Valmet 425EXL Feller Buncher with Quadco 22B 360° Head2008 Valmet 425EXL Feller Buncher with Quadco 22B 360° Head. Hour meter reads 13,369 hours. Cummins 8.3 engine. 24" single grouser pads, undercarriage is estimated at 30%. Leveling system and swing bearing are in good condition. Espar pre heater. Quadco 22B 360° has a good disc and teeth, minimal welding. Heat, A/C, radio. lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Valmet | 425EXL | 2008 |
$97,500
|
![]() |
Ponsse Buffalo Forwarder2008 Ponsse Buffalo Forwarder. Hour meter reads 17,490 hours. 710/45-26.5 tires are estimated at 70%, includes a set of tracks that are estimated at 95%. K100M crane. Webasto preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Ponsse | Buffalo | 2008 |
$110,000
|
![]() |
2007 JOHN DEERE 1270D2007 JOHN DEERE 1270D WHEELED HARVESTER 6 CYL DEERE 600 RUBBER |
John Deere | 1270D | 2007 |
$119,000
|
![]() |
John Deere 2054 with Waratah 622B Processing Head2007 John Deere 2054 with Waratah 622B Processing Head. Hour meter reads 21,700 hours. 28" double grouser pads, undercarriage is estimated at 70%. Newer engine, swing bearing, gear box, radiator, & main pump. Waratah 622B processing head has new feed motor, encoders, all new hoses and other parts. Unit can include a grapple instead for $52,500. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 2054 | 2007 |
$60,000
|
![]() |
Parting Out 2007 Cat 544 ForwarderParting out this 2007 Caterpillar 6wd forwarder. Parts will fit Cat 534. Fabtek 344B & 346B. Prentice 2344 & 2346. Tires are 600mm rear & 23.1X26 front. Engine is bad. Hyd. pump , valve bank , loader with grapple/rotator & headache rack are sold. Cat engine is bad , but we have the parts that are on it. |
CAT | 544 | 2007 |
$Call for Price
|
![]() |
John Deere 648GIII Skidder2006 John Deere 648GIII Dual Arch Grapple Skidder with Winch. This skidder has 3,000 hours on a new engine and wiring harness. New Direct Drive transmission, strong hydraulics and cylinders, decent center section, all axles and cradles are in good order, arch and grapple are tight. 30.5x 32 tires @ 45-65% with a new set of Bear Claw chains. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
John Deere | 648GIII | 2007 |
$63,500
|
![]() |
John Deere 748GIII Skidder2007 John Deere 748GIII Skidder. New engine with 1,000 hours, 10,000 frame hours. 35.5x32 tires are estimated at 75%. Center pins and arch pins are tight. Dry machine, heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 748GIII | 2007 |
$67,500
|
![]() |
Prentice 384 Loader with 60" Slasher2007 Prentice 384 Loader. Hour meter reads 9,800 hours. Cummins 5.9L engine starts and runs good. Loader is tight. New hoses. Big John trailer has good tires. 60" slasher has a good blade and teeth, one bunk is busted off. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Prentice | 384 | 2007 |
$32,500
|