Photo |
Title
|
Make | Model | Year | Price |
![]() |
International with Rear Mount Prentice F-90T Loader1989 International with Rear Mount Prentice F-90T Loader. Cummins LTA10 engine starts and runs good. Tri-axle with drop axle, 11R22.5 tires are estimated at 90%. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | F-90T | - |
$33,900
|
![]() |
Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD*** |
Prentice | 410E | 1999 |
$33,500
|
![]() |
Hood S182 Self Propelled Loader1995-96 Hood S182 Self Propelled Loader. This equipment has a John Deere 6068T engine, runs and starts good, 7,094 hours, strong hydraulics and cylinders, drive system is in good working order, air brakes, tight boom and grapple, Hood 360 continuous grapple, lever controls, solid carrier, heat, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hood | S182 | 1995 |
$33,500
|
![]() |
Hydro Ax 511EX Feller Buncher1996 Hydro Ax 511EX Feller Buncher. This machine has a Cummins 6BT engine, runs and starts good, 7,500 hours, strong hydraulics and cylinders, hydrostats are in good order, tight center section and lift arms, 20" head, straight blade, good teeth, could use turning, heat, A/C, lights. 28L x26 tires - 3 are @ 75%, 1 is @ 30%. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hydro-Ax | 511EX | 1996 |
$33,500
|
![]() |
John Deere 648E Skidder1993 John Deere 648E Dual Arch Grapple Skidder with Winch. Hour meter reads ~16,000 hours, with 3,500 hours on complete engine rebuild. John Deere 6068 engine. 30.5x32 tires are estimated at 20%, includes double diamond studded ice chains that are estimated at 30%. Winch has hood line and chokers. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 648E | 1993 |
$33,500
|
![]() |
Lemco XLT 280 Loader with Siiro 60" Slasher1998 Lemco XLT 280 Loader with Siiro 60" Slasher. Hour meter reads 9,626 hours. John Deere 6068 engine starts and runs good. Bypass grapple. Slasher saw hookups and self-propelled carrier. Tires are estimated at 70%. Siiro 60" Slasher with a straight saw & good teeth can be included for an additional $7,000. Bangboard on chassis is included. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Lemco | XLT 280 | 1998 |
$33,000
|
![]() |
CAT 573 Feller Buncher with Waratah FD22 Head2006 CAT 573 Feller Buncher with Waratah FD22 Head. Hour meter reads 9,496 hours. CAT C7 ACERT engine starts and runs good. Rebuilt engine, front end, transmission gear box, & pump in the last 2,000 hours. New pump drive installed 40 hours ago. 28L tires are estimated at 75% or greater. Tight center section, strong hydraulics. Cab has heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
CAT | 573 | 2006 |
$32,900
|
![]() |
1994 TREE FARMER C6 GRAPPLE CABLE1994 TREE FARMER C6 GRAPPLE CABLE SKIDDER 6 CYL CUMMINS POWERSHIFT HEATER |
Tree Farmer | C6 | 1994 |
$32,900
|
![]() |
Bandit 1400 Chipper1995 Bandit 1400 Chipper. Cummins 6BT engine. Infeed chains and disc are in good shape. All hoses were recently replaced. New belts. Very good shape internally, grapple is tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 1400 | 1995 |
$32,500
|
![]() |
Daewoo LL220 with Propac 453 Delimber2000 Daewoo LL220 with Propac 453 Delimber. Hour meter reads 9,880 hours. New Daewoo engine and rotary motor for the hydraulics with less than 1,000 hours. 24" double grouser pads, undercarriage is estimated at 75%, new tracks pins & rollers, some new pads and hardware. Propac 453 delimber is in good condition, bushings were just replaced, boom is straight. Heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Daewoo | LL220 | 2000 |
$32,500
|
![]() |
John Deere 748G Skidder1995 John Deere 748G Grapple Skidder. This skidder has had a major overhaul, current motor has 4,000-5,000 hours, center pins, main arch pin and clutch were done. Machine has 28,800 hours, engine and transmission were gone through, 4 spare tires 73/44-32 on Clark rims. Heat, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
John Deere | 748G | 1995 |
$32,500
|
![]() |
Timberjack 460C Skidder2000 Timberjack 460C Grapple Skidder with Winch. Hours are unknown, 1,200 hours on new Cummins 5.9L engine. 30.5x32 tires, 3 at 75%, 1 at 35%. Chains are included, estimated at 50%, one set of bear paws and one set of double diamonds. Center pins are new and tight, grapple and arch pins are tight, winch is in good working order. Glass could be replaced. Spare parts can be included. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 460C | 2000 |
$32,500
|