Sort By:   GridGallery
Photo Title
Make Model Year Price
Chambers Delimbinator

Chambers Delimbinator

Chambers Delimbinator. Hour meter reads 3,826 hours. Floor is in good condition. Recently serviced, with new bearings on the drum. All new chains, & includes 4 buckets of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Chambers 520-8348 Unknown
$62,500
 John Deere 648GIII Skidder

John Deere 648GIII Skidder

2012 John Deere 648GIII Grapple Skidder with Winch. Hour meter reads 3,106 hours, runs and starts good with a newer engine & transmission, receipts available upon request. 20,000 frame hours. Strong hydraulics, winch is in good working condition, grapple clasps and spins. 30.5x32 tires are estimated @ 50%. Both rear ends have been recently resealed and boom cylinders packed within the last year. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 648GIII 2012
$61,500
John Deere 653E Feller Buncher

John Deere 653E Feller Buncher

1997 John Deere 653E Feller Buncher. Hour meter reads 8,920 original hours. John Deere 6068T starts and runs good. 36" double grouser pads, undercarriage is estimated at 60%. New idler, sprocket, planetary, rotary manifold seals, swing gear case seals & bearings. Extra auxiliary pump. Cameco 20" 30° tilt felling head, Eureka carbide teeth. Heat, A/C compressor is new. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

John Deere 653E 1997
$61,500
Prentice 2384 Loader with Bucksaw & CTR 426 Delimber

Prentice 2384 Loader with Bucksaw & CTR 426 Delimber

2009 Prentice 2384 Loader with Bucksaw & CTR 426 Delimber. Hour meter reads 17,457 hours. Cummins engine starts and runs good. New compressor and bearing, no turntable slack. Bucksaw and CTR 426 delimber are in good working order. Joystick controls are tight. Kodiak Series 4 trailer has good tires and brakes. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.

Prentice 2384 2009
$61,500
Timberjack 560D Skidder

Timberjack 560D Skidder

2004 Timberjack 560D Grapple Skidder. New John Deere engine. 30.5x32 tires are estimated at 15%. Includes 2 sets of ring chains. New computer. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

Timberjack 560D 2004
$60,000
John Deere 2054 with Waratah 622B Processing Head

John Deere 2054 with Waratah 622B Processing Head

2007 John Deere 2054 with Waratah 622B Processing Head. Hour meter reads 21,700 hours. 28" double grouser pads, undercarriage is estimated at 70%. Newer engine, swing bearing, gear box, radiator, & main pump. Waratah 622B processing head has new feed motor, encoders, all new hoses and other parts. Unit can include a grapple instead for $52,500. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

John Deere 2054 2007
$60,000
Hyundai Robex 210LC-7 with Propac 453 Delimber

Hyundai Robex 210LC-7 with Propac 453 Delimber

2005 Hyundai Robex 210LC-7 with Propac 453 Delimber. Hour meter reads 12,710 hours. Cummins 5.9 engine. This machine has a new boom as of 2019, some work has been done on the head, undercarriage is at about 60%. 28" triple grouser pads. Propac 453 Delimber works well. Straight, dry machine. Hours may increase because it's currently in use. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hyundai Robex 210LC-7 2005
$60,000
John Deere 2154D with Waratah 622B Harvesting Head

John Deere 2154D with Waratah 622B Harvesting Head

2009 John Deere 2154D with Waratah 622B Harvesting Head. Engine and main pump have around 1,000 hours. 24" double grouser pads, undercarriage may need some attention, good pads and rollers but may need a chain soon. Tight boom that could use a few hoses replaced. Head has good feed rollers and grab arms. Logrite measuring system. Heat, A/C, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

John Deere 2154D 2009
$60,000
Timberjack 360C Skidder

Timberjack 360C Skidder

1996 Timberjack 360C Grapple Skidder with Winch. New Reman Cummins 6BT engine starts and runs good. 24.5x32 Firestone tires are estimated at 50%. For an additional $4,000, 23.1x26 tires can be put on, 90% fronts and 75% rears, includes a set of bear paw chains. New center pins. Wider custom blade is currently on the machine but will be replaced with an OEM blade before sale. Heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Timberjack 360C 1996
$60,000
Precision Husky Chipper

Precision Husky Chipper

1992 Precision Husky Chipper. Hours are unknown. KT 600 HP engine starts and runs good. New batteries, oversized cables, master switch, oversized starter, pockets, knife clamps, and counter knives, digital volt meter, and re-cored radiator within the last year. New bearings in feed rear feed wheel, a few new sprockets, drive chains, drive motors for the top feed wheel, rebuilt injector pump, and new hydraulic pump belts within the last 8 months. Also has a new shaft and bearings on the bottom feed wheel. 23" throat. Will fill 42 ton in 30-40 minutes depending on the wood. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.

Precision Husky 1992
$60,000
Loader and Sawbuck

Loader and Sawbuck

2015 CAT loader 559B DL4400 Classic Sawbuck $60,000.00 for both

CAT 559B 2015
$60,000
Tigercat 718 Feller Buncher

Tigercat 718 Feller Buncher

2004 Tigercat 718 Feller Buncher. Machine has ~4,000 engine hours, runs and starts good, tight pins and bushings, strong hydraulics, hydrostatic transmission, head and blade are in good working condition, tires - 2 @ 75%, 2 @ 50%, heat and A/C, good glass and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Tigercat 718 2004
$59,500