| Photo |
Title
|
Make | Model | Year | Price |
|
Timberjack 1010B Forwarder1999 Timberjack 1010B 6W Forwarder. Frame hours are unknown. Hour meter shows 23,000 hours, but is not working. Cummins 4BT engine starts and runs good. Double squirt boom. New center pins, line bored. 70/50-26.5 tires are estimated at 50%, the front two are agricultural tires and could be replaced. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 1010B | 1999 |
$65,000
|
|
Hyundai 210LC-7 with Propac 453 Delimber ***SOLD***2007 Hyundai 210LC-7 with Propac 453 Delimber. Hour meter reads 8,680 hours. New engine with 750 hours. New Berco undercarriage, 28" triple grouser pads. Straight boom, delimber is in good condition. Newer oil pump, new chain on the boom, & new drive motor. New side rollers & new pins and bushings in grab arms. Heat, radio. Open to offers. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Hyundai | 210LC-7 | 2007 |
$64,900
|
|
Valmet 860 Forwarder1995 Valmet 860 Forwarder. This machine has a rebuilt pump, blade, newer tires, new Pro-Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located n Northcentral USA. |
Valmet | 860 | 1995 |
$64,500
|
|
Link Belt 2800 Quantum with ProPac 453 Delimber1998 Link Belt 2800 Quantum with ProPac 453 Delimber. This equipment has an Isuzu 6 cyl. engine, starts & runs good, strong pumps and drive motor, straight boom and good cables. Undercarriage is in good working order. Hour meter reads 13,500 Hours. New windows & seat. Fresh oil and all filters. Runs perfect. Circle topping saw - just had the saw hammered, new teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Link Belt | 2800 | 1998 |
$64,500
|
|
John Deere 643H Feller Buncher with FD55 Head2005 John Deere 643H Feller Buncher with FD55 Head. Hour meter reads 7,500 hours. John Deere 6068 engine starts and runs good. 28Lx26 tires are estimated at 40%, includes a set of chains. Disc and bearing in the FD55 head is in good condition. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 643H | 2005 |
$64,500
|
|
John Deere 648GIII Skidder2006 John Deere 648GIII Dual Arch Grapple Skidder with Winch. This skidder has 3,000 hours on a new engine and wiring harness. New Direct Drive transmission, strong hydraulics and cylinders, decent center section, all axles and cradles are in good order, arch and grapple are tight. 30.5x 32 tires @ 45-65% with a new set of Bear Claw chains. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
John Deere | 648GIII | 2007 |
$63,500
|
|
2005 John Deere 748GIII2005 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE 30.5-32 RUBBER |
John Deere | 748GIII | 2005 |
$62,900
|
|
2004 John Deere 748GIII Skidder2004 JOHN DEERE 748GIII DUAL ARCH GRAPPLE SKIDDER 6 CYL DEERE 30.5-32 RUBBER FRONT TIRE CHAINS NEW PINS AND BUSHINGS IN CENTER AND BLADE NEW BUSHINGS BOOM AND STEER CYLINDERS |
John Deere | 748GIII | 2004 |
$62,900
|
|
Hydro Ax 470 Feller BuncherHYDRO AX 470 WITH PRENTICE CH-50 HEAD 6 CYL CUMMINS LEVER STEER 28L-26 RUBBER |
Hydro-Ax | 470 | 2006 |
$62,500
|
|
Vermeer BC1500 Brush Chipper2021 Vermeer BC1500 Brush Chipper. Hour meter reads 246 hours. 15" chipping capacity, 3 knife. Cummins 3.8L diesel engine. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Vermeer | BC1500 | 2021 |
$62,500
|
|
Chambers DelimbinatorChambers Delimbinator. Hour meter reads 3,826 hours. Floor is in good condition. Recently serviced, with new bearings on the drum. All new chains, & includes 4 buckets of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Chambers | 520-8348 | Unknown |
$62,500
|
|
John Deere 648GIII Skidder2012 John Deere 648GIII Grapple Skidder with Winch. Hour meter reads 3,106 hours, runs and starts good with a newer engine & transmission, receipts available upon request. 20,000 frame hours. Strong hydraulics, winch is in good working condition, grapple clasps and spins. 30.5x32 tires are estimated @ 50%. Both rear ends have been recently resealed and boom cylinders packed within the last year. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
John Deere | 648GIII | 2012 |
$61,500
|