Photo |
Title
|
Make | Model | Year | Price |
Hyundai Robex 210 LC-3 Yoder1997 Hyundai Robex 210 LC-3 Yoder. Hour meter reads 8,838 hours. 28" triple grouser pads, undercarriage is estimated at 75%. Dry valve bank. Tight boom & thumb bucket. Hydraulics are strong. Enclosed cab has heat & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hyundai | Robex 210 LC-3 | 1997 |
$98,000
|
|
Bandit 3680 Beast Horizontal Grinder1997 Bandit 3680 Beast Horizontal Grinder. John Deere engine starts and runs good. 375 HP. Remote control. 300-500 yards per hour. 500 gallon fuel tank, 140 gallon hydraulic tank. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Bandit | 3680 Beast | 1997 |
$97,500
|
|
Valmet 425EXL Feller Buncher with Quadco 22B 360° Head2008 Valmet 425EXL Feller Buncher with Quadco 22B 360° Head. Hour meter reads 13,369 hours. Cummins 8.3 engine. 24" single grouser pads, undercarriage is estimated at 30%. Leveling system and swing bearing are in good condition. Espar pre heater. Quadco 22B 360° has a good disc and teeth, minimal welding. Heat, A/C, radio. lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Valmet | 425EXL | 2008 |
$97,500
|
|
Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher2008 Barko 495ML Self Propelled Loader with a Hanfab 60" Slasher and a Savage Carrier. This equipment has 11,000 hours, engine was rebuilt 6,000 hours, runs and starts good, strong hydraulics and cylinders, self propulsion in good working order, tight boom and grapple, slasher is in good condition, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Barko | 495ML | 2008 |
$95,000
|
|
Tigercat 620E Dual Arch Grapple Skidder2014 Tigercat 620E Dual Arch Grapple Skidder. Hour meter reads 10,700 hours. Fiat engine starts and runs good. Hydrostatic transmission shifts well. Has new 30.5x32 tires on the rear, front are estimated at 60%. Blade in good condition. Enclosed cab has turnaround seat, heat, A/C, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Tigercat | 620E | 2014 |
$95,000
|
|
Morbark 22RXL Whole Tree Chipper1979 Morbark 22RXL Whole Tree Chipper. Full factory rebuild in 2004. CAT 3412, 800 HP engine. Twin disc clutch. Feed roller bearings, knives, & feed chains are in good condition. Produces 7/8" chips. 2014 Hood 8000 loader with Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 22RXL | 1979 |
$95,000
|
|
Washington 78A Yarder1975 Washington 78A Yarder. Hours are unknown. Cummins 5.9. Three guylines. Cables are all in great shape. Undercarriage is in good working order. Price includes two Washington 78-40s as well. One is a parts machine and the other runs but needs a shaft and torque put back in. Also includes two grapple, a Johnson carriage, an intermedite support, all spare parts, and the stick for backspar. Contact Aaron @ Forestry Equipment Sales. 218-720-0933. Equipment is located in Canada. |
Washington | 78A | 1975 |
$95,000
|
|
2006 John Deere 703G2006 John Deere 703G Harvester. This equipment has 15,477 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 70%, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Delvin @ (715) 699-6271 or (715) 634-1555 |
John Deere | 703g | 2006 |
$95,000
|
|
Tigercat 620E Skidder2014 Tigercat 620E Dual Arch Grapple Skidder. Hour meter reads 8,796 hours. 35.5x32 tires estimated at 90%. Tight center and arch pins, blade is straight and in good working order. Webasto preheater. Turnaround seat. Heat, A/C, lights, radio, & joystick controls. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Tigercat | 620E | 2014 |
$94,900
|
|
Morbark Model 23 NCL Chipper1997 Morbark Model 23 NCL Chipper. This machine has 4,200 hours, CAT 550 engine, runs and starts good. Machine was rebuilt in contractors shop 800 hours ago including the following items: new wear plates, belly pans and head liners, new clutch, new in-feed rollers, wireless remote. Chute is in good condition. Dirt separator, this chipper is in excellent shape for the age, produces a very consistent chip. Set up for 7/8" chip currently. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Morbark | Model 23 | 1997 |
$94,900
|
|
Timberjack 1710D Forwarder2004 Timberjack 1710D Forwarder. Hour meter reads 19,500 hours. John Deere 6068 crate engine with 2,500 hours. 750/45R-26.5 tires are estimated at 60%, with two brand new tires on the rear. Includes 2 sets of tracks, 1 set is like new. CF885 crane is tight. Timbermatic computer system. Espar preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Timberjack | 1710D | 2004 |
$94,900
|
|
Trelan 23 Whole Tree Chipper1995 Trelan 23 Whole Tree Chipper. CAT 800 hp engine. 3 knife system. New torque hubs, belts, clutch, & shaft. Chipper and feed rollers are in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Trelan | 23 | 1995 |
$93,500
|