Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Ponsse Ergo Harvester with H7 Head 2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Ergo	2008	$115,000
	Valmet 425EXL Feller Buncher 2008 Valmet 425EXL Feller Buncher with a 20" 40 Degree Quadco Head. This buncher has a Cummins 8.3 engine, runs and starts good, hour meter reads 11,800 hours. strong hydraulics and cylinders. Leveling system and swing bearing are in good condition. Both pumps have been replaced. Espar pre heater. Undercarriage just gone through new sprockets, new bottom rollers, and new 28" double grouser pads. Just went through some hoses and valve bank. Heat works, A/C needs a charge. LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Valmet	425EXL	2008	$115,000
	John Deere 1110D Forwarder 2006 John Deere 1110D Forwarder. Hour meter reads 19,661 hours. John Deere 6068 engine, new head gasket. 600/55-26.5 tires are estimated at 30%, 600/65-34 tires are estimated at 80%, includes a set of tracks that are estimated at 50%. Has welding on the bunks & no stairs. CF510 crane is tight. Espar preheat system. All new A/C system. Heat, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	1110D	2006	$115,000
	Bandit 1850 Track Chipper 2006 Bandit 1850 Track Chipper. Hour meter reads 6,025 hours. Cummins 330 HP engine. One owner chipper. Loader works as it should. Undercarriage is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Bandit	1850	2006	$114,900
	Ponsse Buffalo Forwarder *ON HOLD* 1998 Ponsse Buffalo S16 Forwarder. This machine has a new CAT 3116 engine, runs and starts good, Wabasto heat system, strong hydraulics, cylinders are all in good working order. New center section, tight K75 boom, newer grapple, bogies are all in good working condition, 700 tires, tracks and chains, heat, A/C, and lights. Well Maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. *ON HOLD*	Ponsse	Buffalo	1998	$114,500
	Morbark 23NCL Whole Tree Chipper 1994 Morbark 23NCL Whole Tree Chipper. 850 HP CAT 3412 with 4,600 hours on in-frame overhaul. Top feed chute. Front of engine resealed. New drive belt and Poly chain. Does not burn any oil. Starts well in cold weather. Cooling system in good shape. Clutch in good shape. All new liners in 2021 on the chipper. Babbit 8 knife system installed. New remote system installed that controls all moving parts on the chipper. 8 knife disc is in good shape, set up for 7/8" chips. AR 450 face plates on disc less than 3 years old. New bearings on feed rollers, sprockets and chains recently replaced. Frame is in good shape. Air compressor included. Tires are in good shape and owner will check hubs and brakes at time of sale. Chipper was converted from a WCL, professionally done. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is lcoated in Canada.	Morbark	23NCL	1994	$112,500
	John Deere 748H Skidder 2014 John Deere 748H Dual Arch Grapple Skidder with Winch. This equipment has 9,050 hours, John Deere 6.7 engine, runs and starts good, direct drive with manual option, newer hydraulic pump, tight center section, arch and grapple are tight as well. Solid axles and cradles. Strong winch. 73 x 44.00- 32 tires, 2 new rears front tires @ 50%, dual rims. Heat, A/C, and lights. Well maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	John Deere	748H	2014	$111,000
	Rottne SMV Forwarder 2006 Rottne SMV Forwarder. Hour meter reads ~12,500 hours. John Deere 6068 Engine. Hydrostatic transmission. Tires are at 50%. Comes with set of bogie tracks. Tight center section. Bunks are straight. Strong hydraulics and grapple arms. Lights work. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Rottne	SMV	2006	$110,000
	Ponsse Wisent Forwarder 2006 Ponsse Wisent 8 Wheel Double Bunk Forwarder. This machine has a Mercedes Benz engine, runs and starts good, Pro Heat, new transmission last year installed by Ponsse, new rear-end installed last fall, bogies are in good working order, tight boom and grapple, squirt boom works as it should, decent 710 tires, blade. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Ponsse	Wisent	2006	$110,000
	Tigercat 620E Skidder 2015 Tigercat 620E Grapple Skidder. Hour meter reads 8,458 hours. Tigercat FPT engine. 30.5x32 tires are estimated at 65% with two new sets of ring chains. Tight center and arch pins. Turnaround seat. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Tigercat	620E	2015	$110,000
	CAT 501HD with PF48 4 Roller Processing Head 2010 CAT 501HD with PF48 4 Roller Processing Head. Hour meter reads 9,300 hours. CAT C6.6 engine starts and runs good. 24" double grouser pads, undercarriage is estimated at 60%. Two new delimbing cylinders, measuring wheel, encoder. New data line from the computer to the head, and final drive. Fully serviced, ready to work. Heat, A/C, lights, & satellite radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	CAT	CAT501HD	2010	$110,000
	2006 Deere 1110D This unit has an enclosed cab, with heat and AC, 6068HT John Deere Turbo Diesel engine, Hand controls, CF510 extendable boom with J De Souza grapple, The bunk is approximately 16'x8' The blade is approximately 71". There is a Uniden UM 380 Communication Radio, Stereo, 710/55-34 front tire size, 710/45-26.5 rear tire size. The tires are at roughly 75% We do take trades and we can assist with trucking and financing as well if needed. Thank you for looking!!	-	-	2023	$109,500