Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Peterson HC5400 Horizontal Grinder1998 Peterson HC5400 Horizontal Grinder. Hour meter reads 3,400 original hours. CAT 3412E 1,000 HP engine. New clutch and wiring harness. Recently re-hardfaced and rebuilt head, new belt, banana bars, T-bar, & anvil. 5 full sets of screen choices, 2" to 8". The 5" set is brand new and most are 80%+. Many spare parts included. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Peterson Pacific | HC5400 | 1998 |
$349,900
|
|
John Deere 270 with Keto 525 Processing Head1998 John Deere 270 with Keto 525 Processing Head. Hour meter reads 8,500 hours. John Deere 6068H engine starts and runs good. 32" pads, undercarriage is in good working order. Yard bucket with original teeth is included. Keto 525 processing head works as it should. It's a track-drive head, has 3,000 hours. This is a one owner machine. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
John Deere | 270 | 1998 |
$162,500
|
|
Morbark 23 NCL Chiparvestor1998-99 Morbark 23 NCL Chiparvestor. This machine has a CAT 3412 engine, 850 HP, runs and starts good, hour meter reads 7,600 hours, twin turbos, strong hydraulics, drum and feed rollers are in good order, knife could use sharpening, decent brakes and tires. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Morbark | 23 NCL | 1998 |
$119,500
|
|
Ponsse Buffalo Forwarder ***ON HOLD***1998 Ponsse Buffalo S16 Forwarder. This machine has a new CAT 3116 engine, runs and starts good, Wabasto heat system, strong hydraulics, cylinders are all in good working order. New center section, tight K75 boom, newer grapple, bogies are all in good working condition, 700 tires, tracks and chains, heat, A/C, and lights. Well Maintained. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Buffalo | 1998 |
$114,500
|
|
Timbco 425D Feller Buncher1998 Timbco 425D Feller Buncher with a Quadco 22" Saw Head. This machine has been rebuilt, runs and starts good, 2 new final drives, undercarriage was gone through 3,500 hours ago, tight boom, strong hydraulics, head in good working condition, heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timbco | 425D | 1998 |
$90,000
|
|
Komatsu PC200 with Limmit 2000B Delimber1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Komatsu | PC200 | 1998 |
$84,500
|
|
Bandit 1850XP Tracked Chipper1998 Bandit 1850XP Track Chipper. Hour meter reads 4,000 hours, unknown if original. New Cummins 250hp engine and new glass. New master switch. Boom and grapple are tight. Ready for work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bandit | 1850XP | 1998 |
$81,500
|
|
1998 Valmet 646 ForwarderVALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM FRT TIRES 28L-26 REAR 700/50-26.5 |
Valmet | 646 | 1998 |
$67,900
|
|
Link Belt 2800 Quantum with ProPac 453 Delimber1998 Link Belt 2800 Quantum with ProPac 453 Delimber. This equipment has an Isuzu 6 cyl. engine, starts & runs good, strong pumps and drive motor, straight boom and good cables. Undercarriage is in good working order. Hour meter reads 13,500 Hours. New windows & seat. Fresh oil and all filters. Runs perfect. Circle topping saw - just had the saw hammered, new teeth. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Link Belt | 2800 | 1998 |
$64,500
|
|
Morbark 30/36 Whole Tree Chipper1998 Morbark 30/36 Whole Tree Chipper with Cab & Loader. Meter reads 1,200 but is incorrect. 425hp engine. Needs a new clutch or can be replaced before sale for an additional cost. New infeed chain, tires are good, wireless remote included. Owner states drum is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 30/36 | 1998 |
$56,500
|
|
John Deere 540G Skidder1998 John Deere 540G Cable Skidder. This skidder has been well maintained, runs and starts good, strong hydraulics and cylinders, PowerShift transmission, strong winch with newer cable, tight center section, 23.1 x 26 tires @ 50% with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA. |
John Deere | 540G | 1998 |
$54,500
|
|
Timbco 415C Harvester with a Ponsse H73 Head1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$52,500
|