Photo |
Title
|
Make | Model | Year | Price |
Timberjack 460C Skidder2000 Timberjack 460C Grapple Skidder with Winch. Hours are unknown, 1,200 hours on new Cummins 5.9L engine. 30.5x32 tires, 3 at 75%, 1 at 35%. Chains are included, estimated at 50%, one set of bear paws and one set of double diamonds. Center pins are new and tight, grapple and arch pins are tight, winch is in good working order. Glass could be replaced. Spare parts can be included. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberjack | 460C | 2000 |
$33,500
|
|
Franklin C5000 Wheeled Feller Buncher2000 Franklin C5000 Wheeled Feller Buncher with a Koehring 20" Saw Head. This buncher has a Cummins 5.9 engine, runs and starts good, strong hydraulics and cylinders. Machine runs and operates as it should. 30.5 x 32 tires @ 30% with chains. Heat and new glass. Unit just got a new front main seal and new timing cover gasket. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Franklin | C5000 | 2000 |
$21,500
|
|
Clark Ranger F65 Cable Skidder2000 Clark Ranger F65 Cable Skidder. Engine was replaced with a Cummins 5.9 engine that starts and runs good. 3 speed transmission shifts well. 18.4x34 tires are estimated at 35%, that come with one set of Bear Paw chains. Allied W3C winch is strong with a 30,000 lbs. rating. Has lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Clark | F65 | 2000 |
$25,000
|
|
2000 JOHN DEERE 1202000 JOHN DEERE 120 TRACKED HARVESTER 4 CYL DEERE FOUR ROLLER HEAD INDEPENDENT COUNTER |
John Deere | 120 | 2000 |
$49,500
|
|
CAT 525 Skidder2000 CAT 525 Grapple Skidder with Winch. Hour meter reads 7,500 original hours. Engine starts and runs good. 30.5 tires estimated at 60% with a set of ring chains that are estimated at 80%. Tight center, strong hydraulics. Cab has heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
CAT | 525 | 2000 |
$42,000
|
|
Barko 225 Log Loader with CTR 450 Delimber2000 Barko 225 Log Loader with CTR 450 Delimber. Brand new hydraulic pump, turn table, pins and bushings in the boom. Bucket has a new rotate bearing and turn motor. CTR 450 delimber has good knives and is in good working order. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Barko | 225 | 2000 |
$40,000
|
|
Timberjack 608 Feller Buncher with FS20 Head2000 Timberjack 608 Feller Buncher with FS20 Head. Hour meter reads 13,802 hours. Cummins engine starts and runs good. 24" single grouser pads with the undercarriage estimated at 75%. Tight boom, hydraulics are strong. New sprockets, chains, & rollers. Both final drives have been rebuilt (receipts can be provided upon request). All cylinders and bushings have been repacked. New pins and bushings on the boom and stick. Newer wiring and gauges, rebuilt cylinders on the head, full service and fresh paint job. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Timberjack | 608L | 2000 |
$Call for Price
|
|
Morbark 20/36 Chipper2000 Morbark 20/36 Drum Chipper. Hour meter reads 1,000 original hours. Cummins 275 HP engine. Loader is tight. Drum is in good shape with no cracks. New hoses. Cab with Heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 20/36 | 2000 |
$85,000
|
|
Tigercat 860 Feller Buncher with Koehring 22" Head2000 Tigercat 860 Feller Buncher with Koehring 22" Head. Hour meter reads 20,789 hours. John Deere 8.1L engine. 24" single grouser pads, undercarriage is estimated at 85%. Rock guard. Rails, rollers, & idlers have less than 1,000 hours. Pads have been changed over once. KIDDE fire suppression and Proheat preheater systems. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Tigercat | 860 | 2000 |
$31,500
|
|
Rotobec F2000B Forwarder2000 Rotobec F2000B Single Bunk Forwarder. Hour meter reads 15,307 hours. Cummins 4BT engine with new bottom end bearings. New turbo. 18.4-26 tires are estimated at 80%, includes chains. Crane and center are tight. Hydraulic pump is newer with 1,500 hours, jib cylinder has 300 hours. Heat, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Rotobec | F2000B | 2000 |
$36,500
|
|
John Deere 120 with Fabtek 4 Roller Head2000 John Deere 120 with Fabtek 4 Roller Head. Hour meter reads 22,380 hours. John Deere 4045T engine, 1,200 hours on new engine, turbo, water pump, oil cooler, belts, & pullies. 24" triple grouser pads, undercarriage is estimated at 60%. Main pump and hoses were done 600 hours ago. Most cylinders have been just repacked. New wiring harnesses and 2 new encoders on head. New computer components. New leveling motors on the head, 3rd wheel measuring system is in good working order. Proheat preheat system for engine was just gone through, cab, & hydraulics. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. 2 new encoders on the head. |
John Deere | 120 | 2000 |
$52,500
|
|
Kobelco SK200 Mark IV with Waratah 230HTH Processing Head2000 Kobelco SK200 Mark IV with Waratah 230HTH Processing Head. Hours are unknown. Mitsubishi engine. 24" triple grouser pads, undercarriage is estimated at 40%. Waratah 230HTH processing head is in good working order. Heat, A/C, lights, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Kobelco | SK200 Mark IV | 2000 |
$34,500
|