Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Timberking TK560DS Loader with Propac 60" Slasher2008 Timberking TK560DS Loader. Hour meter reads ~10,000 hours. Perkins 6cyl diesel engine. Boom is tight, live heel, hydraulic landing gear is in good working order. Propac 60" Slasher has a good blade and teeth. SureGrip joystick controls. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Timberking | TK560DS | 2008 |
$68,500
|
|
Komatsu PC200 LC-8 with Denharco DMC4140 Delimber2008 Komatsu PC200 LC-8 with Denharco DMC4140 Delimber. Cylinders are dry. Hydraulic hoses are dry. Cummins engine. Bypass grapple & top saw on the delimber. Undercarriage at about 30%. 28" double grouser pads. New set of rails and pads that could go with. Denharco DMC4140 Delimber is in good shape. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC200 LC-8 | 2008 |
$42,500
|
|
Rottne H14 with 561 SP Processing Head2008 Rottne H14 Processor with 561 SP Processing Head. Hour meter reads 12,000 hours. John Deere 6068 engine starts and runs good. 600/45-26.5 tires are at 85%. RK 140 boom is tight. Self leveling cab works as it should. New pins and bushings, the brake on the head, knife pins & bushing, and repacked cylinder. Cab bushing has recently been changed. Enclosed cab has heat, A/C, and radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rottne | H14 | 2008 |
$105,000
|
|
Ponsse Ergo Harvester with H7 Head2008 Ponsse Ergo Harvester with H7 Head. This equipment has a Mercedes engine, runs and starts good, strong hydraulics and cylinders, new conical pins in the crane base and upper and lower in the pillar. 6/20/18 all new pressure hoses, case drain hose and steal lines inside the boom. All new inner and outer swing gear bolts. bogies are in good order. Computer was just cleaned out at Ponsse. 710 tires are good with 1 set of tracks. Heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Ponsse | Ergo | 2008 |
$115,000
|
|
Ponsse Ergo with H7 Harvesting Head ***SOLD***2008 Ponsse Ergo with H7 Harvesting Head. This machine went through Ponsse's rebuild program about 4,000 hours ago. Reman Mercedes engine, front differential, & transmission. New wire harnesses. Newer hydraulic pump installed 1,800 hours ago. 700 tires are estimated at 50%, one set of tracks that are included are estimated at 70%. H7 processing head is in good working order. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Ponsse | Ergo | 2008 |
$162,500
|
|
Ponsse Buffalo Forwarder2008 Ponsse Buffalo Forwarder. Hour meter reads 17,490 hours. 710/45-26.5 tires are estimated at 70%, includes a set of tracks that are estimated at 95%. K100M crane. Webasto preheat system. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Ponsse | Buffalo | 2008 |
$117,500
|
|
John Deere 903J Feller Buncher with FR22 Head2008 John Deere 903J Feller Buncher with FR22 Head. Hour meter reads ~18,000 hours. Engine was redone at 12,500 hours. John Deere 6081H engine starts and runs good. Boom and stick bushing have been done at 15,000 hours. Strong hydraulics and cylinders. 24" single grouser pads, undercarriage is at 40%. Enclosed cab has heat, A/C, lights, Sure Grip joystick controls, & TMC computer system. FR22 head is 360° rotating. Saw and carbide teeth are in good shape. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
John Deere | 903J | 2008 |
$44,900
|
|
Timberjack 648H Log Skidder2008 Timberjack 648H Dual Arch Log Skidder with Winch. This equipment has a John Deere 6068 engine. Torque converter transmission. 8,400 hours on meter. 30.5x32 tires, one new, 30% on others. 2 sets of DD chains. Dry machine overall. One engine panel missing, can be replaced. Pins & bushings are in good shape. Seat and controls are in good shape. Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 648H | 2008 |
$68,900
|
|
Valmet 603 Feller Buncher2008 Valmet 603 Feller Buncher. Hour meter reads 12,730 hours. Cummins 4BT 130hp engine. Hydrostatic transmission. 28Lx26 tires are estimated at 60%. Koehring felling head, good disc & teeth, minimal welds. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Valmet | 603 | 2008 |
$52,500
|
|
CAT 501HD Processor2008 CAT 501HD Processor with Fixed Head. This machine has 12,000 hours, runs and starts good, like new undercarriage, strong hydraulics. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***REDUCED FROM $164,500.00*** |
CAT | 501HD | 2008 |
$149,000
|
|
CAT 501HD Harvester with Fabtek 4 Roller Head2008 CAT 501HD Harvester with Fabtek 4 Roller Head. Hour meter reads ~14,000 hours. CAT C6.6 engine starts and runs good. 24" single grouser pads. Undercarriage is estimated at 65%. Newer motor and pump with 600 hours. New ICAN computer. New chains on the feed wheel, also has new knives. Preheater. Enclosed cab has heat, A/C, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CAT | 501HD | 2008 |
$105,000
|
|
2008 CAT 501HD2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD |
CAT | 501HD | 2008 |
$189,000
|
- 1
- 2