Featured in Logging Equipment

Sort By:   GridGallery
Photo Title
Make Model Year Price
Ponsse Wisent Forwarder

Ponsse Wisent Forwarder

2004 Ponsse Wisent 8 Wheeled Forwarder. Hour meter reads 26,460 hours. Mercedes engine. 600/55-26.5 tires are estimated at 30%. Includes an extra tire and rim. Tracks included are estimated at 70%. Squirt boom with SureGrip bypass bucket. Webasto preheat system. Heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Wisent 2004
$85,000
2004 Timberpro TF-820E

2004 Timberpro TF-820E

Forwarder ready for your job

Timberpro TF-820E 2004
$Call for Price
Rottne Rapid Forwarder

Rottne Rapid Forwarder

2004 Rottne Rapid Double Bunk 6 Wheel 12 Ton Forwarder. This equipment has a John Deere 4045 4 cyl. engine, runs and starts good, head gasket at 10,000 hours. Hydrostatic pump and motor replaced @ 10,000 hours, 2 new planetaries @ 10,000 hours, 2 @ 13,500. Tracks and chains @ 30%. Lots of new parts, one extra tire, two extra bogies. Machine has 14,200 frame hours, tight boom, extended boom in good working order, over size oscillation bearing. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Rottne Rapid 2004
$92,500
Danzco T18 Delimber ***SOLD***

Danzco T18 Delimber ***SOLD***

2004 Danzco T18 Delimber. Has a Yanmar diesel engine. One owner. Approximately 500 hours. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. ***SOLD***

Danzco P18 2004
$Call for Price
Ponsse Gazelle Forwarder

Ponsse Gazelle Forwarder

2004 Ponsse Gazelle 8 Wheeled Forwarder. Hour meter reads 29,700 hours. Mercedes engine. 710/45-26.5 tires are estimated at 50%. K70 crane. New seals and new swing cylinder. No hydraulic leaks. Webasto preheat system. Heat, A/C, lights, & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Gazelle 2004
$65,900
Fabtek FT 133 Processor with a 4 Roller Head

Fabtek FT 133 Processor with a 4 Roller Head

2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA

Fabtek FT133 2004
$83,500
Ponsse Ergo with H7 Harvesting Head

Ponsse Ergo with H7 Harvesting Head

2004 Ponsse Ergo with 2015 H7 Harvesting Head. Complete factory refurbish in 2017. Hour meter reads 7,559 hours. Recently resealed front diff. Newer internal bearings in the bogies. Auto-grease, new webasto preheater and computer. Tires are estimated at 90%, includes chains that are like new and Olofsfors tracks estimated at 85%. 2015 H7 harvesting head is in good condition, feed wheels are like new, measuring system in good working order. One new lower delimbing arm. No cracks, dents, or welds on the head. Heat, A/C, radio, and lights. Can include a 2016 Buffalo as a package for $380,000. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo with H7 Head 2004
$198,500
Ponsse Ergo Harvester with H73E Harvesting Head

Ponsse Ergo Harvester with H73E Harvesting Head

2004 Ponsse Ergo 6 Wheeled Harvester with 2007 H73E Harvesting Head. Hour meter reads 15,925 hours. 710/45-26.5 tires are estimated at 65%. 2007 H73E head is in good overall condition. All lights are working. Heat and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Ponsse Ergo 2004
$46,500
John Deere 843H Feller Buncher

John Deere 843H Feller Buncher

2004 John Deere 843H Feller Buncher. Hour meter reads 15,000 frame hours, newer complete engine with injection pump, 1,300 hours on it, receipts available. 28Lx26 tires are estimated at 80%, 2 are new. 2 sets of twisted link single diamond chains, one is like new. New rear diff & pin, saw motor, saw bearing, & tree plate. Heavy duty dual rims with new spare tire, two spare sets of flipper arms, & some cylinders can be included for an additional cost. Espar preheat system, heat, A/C, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 843H 2004
$56,500
Timberjack 840 Feller Buncher

Timberjack 840 Feller Buncher

2004 Timberjack 840 Feller Buncher. Hours are unknown, John Deere 6068H engine, 1,000 hours on engine rebuild. Hydrostatic transmission. 28Lx26 tires are estimated at 20%. FD22 head is in good working order. Heat, & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.

Timberjack 840 2004
$29,500
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2004 John Deere 748GIII Dual Arch Grapple Skidder. Hour meter reads 9,500 hours. John Deere 6081 engine. Newer Direct Drive transmission with 1,000 hours. Brand new turbo. 73/44.00-32 Firestone tires on dual rims are estimated at 60%, includes a set of double diamond studded ice chains. Center and arch pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2004
$51,500
John Deere 748GIII Skidder

John Deere 748GIII Skidder

2004 John Deere 748GIII Dual Arch Grapple Skidder. Hour meter reads 9,600 hours. John Deere 6081 engine starts and runs good, pre-emissions. Newer Direct Drive transmission 3,000 hours. 73/44.00-32 Firestone tires on dual rims are estimated at 70%, includes a set of double diamond studded ice chains. Center and arch pins were gone through recently & are tight. New orbit motor. Will need a rear u-joint soon. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 748GIII 2004
$51,500