Featured in Logging Equipment
Photo |
Title
|
Make | Model | Year | Price |
Rottne Rapid SMV Forwarder2001 Rottne Rapid SMV Forwarder. This machine has a newer John Deere 6068T engine with 2,000 hours, runs and starts good, strong hydraulics, newer drive pump, tight center section has been reinforced, boom is solid. New swing bearing in pedestal, grapple has a little play. One bogie has been replaced, 710 tires @ 50%, set of tracks, heat, radio and lights. A/C needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Rottne | Rapid | 2001 |
$72,500
|
|
Fabtek FT-133 with Fabtek 4 Roller Head2001 Fabtek FT-133 with Fabtek 4 Roller Head. Hour meter reads 15,500 hours. John Deere 6068 crate engine installed 800 hours ago. New hydraulic pump, sprockets, idlers, rails, & rollers were also done at that time. 24" double grouser pads. Proheat preheat system. Boom is tight. New Parker touchscreen CPU and joysticks. New Lexan glass. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | FT-133 | 2001 |
$80,000
|
|
Ponsse Bison Forwarder ***ON HOLD***2001 Ponsse Bison 6 Wheel Double Bunk Forwarder. This equipment has a newer Mercedes Benz 4 cylinder engine with approximately 6,000-7,000 hours, runs and starts good. 13,000 total machine hours. New center pins and big bearing. New rear brake, new controller, strong hydraulics and cylinders. Tight boom and grapple. Heat, A/C, and lights. Tires are in good working order with a set of tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD*** |
Ponsse | Bison | 2001 |
$87,500
|
|
Valmet 921 with 370E Processing Head2001 Valmet 921 with 2005 370E Processing Head. Hours are unknown. Valmet 634 6cyl turbo diesel engine starts and runs good. 750 bogie tires are in good condition, estimated at 80%. Front tires are estimated at 25%. Cranab crane with a 2005 370E processing head, measuring system is in good working order. New cab main bearing 600 hours ago, new A/C compressor in 2022. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Valmet | 921 | 2001 |
$34,900
|
|
Valmet 860 Double Bunk 6 Wheel Forwarder2001 Valmet 860 Double Bunk 6 Wheel Forwarder. This machine has a Sisu engine, runs and starts good, strong hydraulics and cylinders, lift cylinder and bucket cylinder have been rebuilt. Cranab 850XL Crane, SureGip grapple, small leak on jib cylinder, few minor leaks on machine. Runs well, has a new computer. Has a mechanical throttle instead of electrical. Front tires are @ 70%, rear tires are @ 45%. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$46,500
|
|
Valmet 860 6 Wheeled Forwarder2001 Valmet 860 6 Wheeled Forwarder. Hour meter reads 15,000 hours. Sisu engine, starts and runs good. Rear 710-/45-26.5 tires are estimated 40%. Front tires are estimated at 75% with one being new. Set of tracks at 20% are included. New A/C compressor and bogie bearings. Cranab 850 crane with minimal slack and a squirt boom. SureGrip grapple. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Valmet | 860 | 2001 |
$67,500
|
|
Timbco 820D Forwarder2001 Timbco 820D Forwarder. Hour meter reads 8,399 hours. Cummins 8.3L engine. 710/45-26.5 tires are estimated at 85%. Originally a clam bunk forwarder, the clam bunk can be included for an additional cost. Center & loader are tight. Blade is in good condition. This unit is setup to be a combo machine, a 2008 Ponsse H8 Harvesting Head with top saw can be included for an additional cost. Heat, A/C, radio, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Timbco | 820D | 2001 |
$152,500
|
|
John Deere 653G Feller Buncher2001 John Deere 653G Feller Buncher. Hour meter reads 8,605 hours. Reman John Deere 6068T engine with 2,000 hours. 24" double grouser pads, undercarriage is estimated at 70%, will need two bottom rollers. Resealed the rotary manifold in 2022. Waratah 20" felling head. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
John Deere | 653G | 2001 |
$55,000
|
|
Hydro-Ax 611EX Feller Buncher2001 Hydro-Ax 611EX Feller Buncher. Hour meter reads 8,657 hours. Cummins 6CT engine starts and runs good, 1,400 engine hours. 28L-26 tires are estimated at 80%. New lexan glass all the way around. Has a new skid plate. Enclosed cab has heat & new A/C system. S56 bunching head. Tight well maintained machine that's ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Hydro-Ax | 611EX | 2001 |
$29,500
|
|
Timberjack 608S with 2005 Log Max 7000C ***SOLD***2001 Timberjack 608S Processor with 2005 Log Max 7000C Processing Head. Strong hydraulics and cylinders, ITR undercarriage has approximately 1,150 hours of use - rollers, sprockets and rails, 24" pads are in good shape. New pins and bushings in the boom 950 hours ago. 2005 Log Max 7000C is in very good condition, 5,960 hours, Logmate 402 computer, feed wheels and knives are in good shape, very little welding on head. Flex air reversible fan, Espar pre-heater system, heat, A/C, and LED lights. Machine is extremely straight and dry for it's age. All panels open and close as they should. No hydraulic leaks were visible. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 608DS | 2001 |
$Call for Price
|
|
CAT 515 Skidder2001 CAT 515 Single Arch Grapple Skidder with Winch. Hour meter reads 13,850 hours. CAT 3304 engine starts and runs good. 28Lx26 tires, rears estimated at 70%, fronts at 45%. Chains are in good condition. Single arch, with bunching grapple. New rotator. All cylinders were rebuilt last February. Heat & A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
CAT | 515 | 2001 |
$55,000
|
|
Timberjack 460D Skidder2001 Timberjack 460D Single Arch Grapple Skidder with Winch. Hour meter reads 12,000 hours. John Deere 6068 engine, powershift transmission. 30.5x32 tires are estimated at 90%. Center pins have a little slack. Recently serviced. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timberjack | 460D | 2001 |
$44,500
|
- 1
- 2