Featured in Logging Equipment

1998 Lemco XLT 280 Loader with Siiro 60" Slasher. Hour meter reads 9,626 hours. John Deere 6068 engine starts and runs good. Bypass grapple. Slasher saw hookups and self-propelled carrier. Tires are estimated at 70%. Siiro 60" Slasher with a straight saw & good teeth can be included for an additional $7,000. Bangboard on chassis is included. Heat, A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD***

1998 Komatsu PC200 with Limmit 2000B Delimber. Hour meter reads 10,800 hours. Komatsu ST5 engine. 32" triple grouser pads, undercarriage is estimated at 85%. Hydraulic pump was redone at 7,500 hours. 32" triple grouser pads, undercarriage is estimated at 85%. 1998 Limmit 2000B delimber, has a topping saw, will delimb a 24" log. Measuring system was purchased from Risley. Boom is straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA.

1998 Peterson HC5400 Horizontal Grinder. Hour meter reads 3,400 original hours. CAT 3412E 1,000 HP engine. New clutch and wiring harness. Recently re-hardfaced and rebuilt head, new belt, banana bars, T-bar, & anvil. 5 full sets of screen choices, 2" to 8". The 5" set is brand new and most are 80%+. Many spare parts included. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

1998 Ponsse Cobra HS10 Harvester with a Ponsse H53 Head. This equipment has a Perkins 6 cylinder engine, runs and starts good, 6,500 hours on engine, new flex plate. Center cone bearing was recently redone, tight boom and grapple, double squirt boom extension in good working order, strong hydraulics and cylinders, tight bogies, few minor leaks. Ponsse 1000 computer, head is in working condition, may need a few pins and bushings. 700-45 x 22.5 tires @ 50%. Heat & lights. A/C will need some attention. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.

1998 Tigercat 845B Feller Buncher with a Koehning 22" Head. Hour meter reads 14,130 hours. Cummins 8.3 engine starts and runs good. 28" double grouser pads, undercarriage is estimated at 75%. Boom is tight. Finals have just been resealed. One of the hydraulic pumps has been recently replaced. Koehring head has a newer disc with good teeth. Cuts 22". Cab has heat, A/C. All manuals included. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***