| Photo |
Title
|
Make | Model | Year | Price |
|
Morbark 23WCL Whole Tree Chipper1995 Morbark 23WCL Whole Tree Chipper. Hour meter reads 2,604 hours. CAT 3412 engine starts and runs good. Disc chipper. 30 knives included. Also includes a jig to solder knives. Brand new anvil. 3 knife system, 3/4 chip size. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 23WCL | 1995 |
$138,500
|
|
Morbark 23NCL Whole Tree Chipper1994 Morbark 23NCL Whole Tree Chipper. 850 HP CAT 3412 with 4,600 hours on in-frame overhaul. Top feed chute. Front of engine resealed. New drive belt and Poly chain. Does not burn any oil. Starts well in cold weather. Cooling system in good shape. Clutch in good shape. All new liners in 2021 on the chipper. Babbit 8 knife system installed. New remote system installed that controls all moving parts on the chipper. 8 knife disc is in good shape, set up for 7/8" chips. AR 450 face plates on disc less than 3 years old. New bearings on feed rollers, sprockets and chains recently replaced. Frame is in good shape. Air compressor included. Tires are in good shape and owner will check hubs and brakes at time of sale. Chipper was converted from a WCL, professionally done. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is lcoated in Canada. |
Morbark | 23NCL | 1994 |
$112,500
|
|
Trelan 23L Whole Tree Chipper1990 Trelan 23L Whole Tree Chipper. Hour meter reads 1.890 hours. CAT 3412 engine had a full rebuild in 2011. All factory upgrades were completed in 2010. Light package, catwalk railing. All loader boom pins & bushings have been replaced. New air pre-cleaners. This was an occasional land clearing chipper, it was not used for any mulch production. Enclosed cab with heat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Trelan | 23L | 1990 |
$99,500
|
|
Prentice 2384B w/ CSI 4400 Buck Saw & CTR 426 Delimber2012 Prentice 2384B Loader with CSI 4400 Buck Saw and CTR 426 Delimber. Hour meter reads 14,000 hours. Reman hydraulic pump and pilot pump. Boom is straight, minimal slack. CSI 4400 Buck Saw with an 18' table. CTR 426 delimber is in good working order. John Evans trailer. Cab has heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Prentice | 2384B | 2012 |
$43,500
|
|
Prentice 2384 Loader with Bucksaw & CTR 426 Delimber2009 Prentice 2384 Loader with Bucksaw & CTR 426 Delimber. Hour meter reads 17,457 hours. Cummins engine starts and runs good. New compressor and bearing, no turntable slack. Bucksaw and CTR 426 delimber are in good working order. Joystick controls are tight. Kodiak Series 4 trailer has good tires and brakes. Heat, A/C, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Prentice | 2384 | 2009 |
$61,500
|
|
Morbark 2355 Flail Chiparvestor2012 Morbark 2355 Flail Chiparvestor. Hour meter reads 17,000 hours. CAT C27 engine that was gone through a few years ago. 3 knife, liners are good, flails are in good condition. New PTO system in 2022. Needs new rubbers inside the flails. Includes spare bearings, conveyor chains, flail rods, & filters. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA. |
Morbark | 2355 | 2012 |
$270,000
|
|
Tigercat 234B Loader w/CSI 264 Delimber & CSI Buck Saw2018 Tigercat 234B Loader with CSI 264 Delimber and CSI DL-4400 Bucksaw. Hour meter reads 4,395 hours. Loader is tight, 32' boom. CSI DL-4400 bucksaw has less than 300 hours on it, 264 delimber is in good working order. Trailer is in good condition, tires estimated at 30%. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | 234B | 2018 |
$203,500
|
|
2010 PRENTICE 23462010 PRENTICE 2346 DOUBLE BUNK FORWARDER 4 CYL CAT POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 23.1-26 FRT 600/55-26.5 REAR |
Prentice | 2346 | 2010 |
$169,000
|
|
Timberjack 230D Forwarder1975-76 Timberjack 230D Single Bunk Forwarder with a Barko 40 Loader. This equipment runs and starts good, Eaton transmission, strong hydraulics and cylinders, center has a little play. 23. 1 x 26 tires with chains. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
Timberjack | 230D | 1975 |
$13,500
|
|
Timberjack 230D Skidder1978 Timberjack 230D Cable Skidder. Detroit 353 engine starts and runs good. Tires are estimated at 20%. Brand new 100’ 5/8” swaged mainline. 6 chokers. Center pins have some play in them. Winch is strong. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA. |
Timberjack | 230D | Unknown |
$17,500
|
|
Timberjack 230D Skidder ***SOLD***1978 Timberjack 230D Cable Skidder. Detroit 353 engine. 18.4-34 tires are estimated at 50%. Can include a new set of bear paw ring chains for $3,000. Strong winch. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Timberjack | 230D | 1978 |
$17,000
|
|
Timberjack 230C Skidder1966 Timberjack 230C Cable Skidder. Detroit diesel engine. 18.4-34 tires are estimated at 60%. Winch is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Timberjack | 230C | 1966 |
$16,500
|