Photo |
Title
|
Make | Model | Year | Price |
2004 Timberpro TF-820EForwarder ready for your job |
Timberpro | TF-820E | 2004 |
$Call for Price
|
|
Kenworth T600 Loader Truck with a Prentice 210C Loader1988 Kenworth T600 Loader Truck with a 1992 Prentice 210C Loader. This truck has a CAT 3406B engine, runs and starts good, 9 speed transmission. Loader has a rebuilt John Deere 6414, dragline controls, strong hydraulics and cylinders - few minor leaks, newer injection pump. Boom and grapple are in working order, dead heel. Heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Prentice | T600 | 1992 |
$18,000
|
|
Timbco T415C Harvester with Ponsse H73 ***SOLD***1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,786 hours. John Deere 6068T Engine. Starts and runs good. Single grouser pads. Undercarriage is at 70%. Pins and bushings are good. Very clean and straight unit, extendable boom, has a newer pump. The 2006 Ponsse H73 Processing Head has around 4500 hours. 30" Processing Head. Grab arms and feed rollers are in good working order. Enclosed cab has heat, a/c, radio, & lights. Dry & tight machine that's ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. ***SOLD*** |
Timbco | T415-C | 1998 |
$Call for Price
|
|
Rayco T275 Stump Grinder ***SOLD***2010 Rayco T275 Stump Grinder. Hour meter reads 1,617 hours. CB275 Hydra-Stumper stump grinder with 56 Rayco monster teeth. John Deere 275hp turbo diesel engine. High pressure hydrostatic to Gates Polychain GT. 24" double grouser pads, undercarriage is estimated at 40%. Clean air system. Pilot joystick controls. Heat, A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Rayco | T275 | 2010 |
$Call for Price
|
|
Tigercat T250B Track Loader2011 Tigercat T250B Track Loader. 17,500 frame hours, new engine with 650 hours. New hydraulic pump. 24" triple grouser pads, undercarriage is estimated at 80%. Live heel. Boom is tight. Heat, A/C, lights, radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Tigercat | T250B | 2011 |
$155,000
|
|
Timbco 425 Feller Buncher with a 33" Bar Saw Head1993 Timbco 425 Feller Buncher with a 33" Bar Saw Head. This equipment has a Cummins engine, runs and starts good, strong hydraulics and cylinders, many new hoses, drive motors are in good working order, tight boom and base, newer saw motor. Undercarriage is good. Sprockets, rails, and tracks are in good working order. Leveling cab, heat, and lights. A/C may need charge. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Timbco | T-425 | 1993 |
$57,500
|
|
Bell Super T with Dangle Head1995 Bell Super T with Dangle Head. Deutz 4 cylinder air cooled diesel engine. New orbit motor in the head. Equipment is in good working order. 23.1 x 26 tires are estimated at at 25%. Rings chains estimated at 40% are included. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Bell | Super T | 1995 |
$18,000
|
|
Rottne SMV Forwarder2006 Rottne SMV Forwarder. Hour meter reads ~12,500 hours. John Deere 6068 Engine. Hydrostatic transmission. Tires are at 50%. Comes with set of bogie tracks. Tight center section. Bunks are straight. Strong hydraulics and grapple arms. Lights work. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rottne | SMV | 2006 |
$110,000
|
|
Rottne SMV Forwarder2010 Rottne SMV 8 Wheeled Forwarder. Hour meter reads 16,337 hours. John Deere 6068 engine. 700/50-30.5 tires are estimated at 20%. Crane is tight, bunks are straight. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Rottne | SMV | 2010 |
$58,500
|
|
Kobelco SK200 Mark IV with Waratah 230HTH Processing Head2000 Kobelco SK200 Mark IV with Waratah 230HTH Processing Head. Hours are unknown. Mitsubishi engine. 24" triple grouser pads, undercarriage is estimated at 40%. Waratah 230HTH processing head is in good working order. Heat, A/C, lights, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Kobelco | SK200 Mark IV | 2000 |
$34,500
|
|
Concept Products Shred-All 5600 Wood Chipper2006 Concept Products Shred-All 5600 Wood Chipper. This chipper was a state owned machine that was used for pallets. John Deere 6068T engine starts and runs good, 12' conveyor, 22" infeed roller diameter, 56" cutting drum, good tires and electric brakes. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Southwest USA. |
Concept Products | Shred-All 5600 | 2006 |
$90,000
|
|
Ponsse Scorpion King Harvester2020 Ponsse Scorpion King Harvester. 5,400 hours on hour meter. 10m C50 crane, H7 processing head, & 710-45x26.5" tires at 90%. Black Bruin RH3016 and double brake link, fixed back delimbing knives, thumbnail feed rollers, & saw box lights. This machine has three cameras (engine side and reverse), LED lights, radio, heat, A/C. Also has the fridge, food heater, & sunshades. This machine is ready for the woods. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ponsse | Scorpion King | 2020 |
$Call for Price
|