Sort By:   GridGallery
Photo Title
Make Model Year Price
Lemco 72" Saw Table ***SOLD***

Lemco 72" Saw Table ***SOLD***

1998 72" Lemco Saw Table in good working condition. Will need a couple of hoses changed. Used sparingly for tree length and in good condition for age. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Lemco 72 1998
$Call for Price
HANFAB 72" Pull Behind Slasher

HANFAB 72" Pull Behind Slasher

2005 HANFAB 72" Pull Behind Slasher. This equipment has a straight blade, good teeth, solid frame, butt board is in good order. strong hydraulics and pump, decent tires, pintle hitch. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hanfab 72 2005
$22,500
Tigercat 718 Feller Buncher

Tigercat 718 Feller Buncher

2004 Tigercat 718 Feller Buncher. Machine has ~4,000 engine hours, runs and starts good, tight pins and bushings, strong hydraulics, hydrostatic transmission, head and blade are in good working condition, tires - 2 @ 75%, 2 @ 50%, heat and A/C, good glass and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southcentral USA.

Tigercat 718 2004
$59,500
Hydro Ax 711EX Feller Buncher ***SOLD***

Hydro Ax 711EX Feller Buncher ***SOLD***

2000 Hydro Ax 711EX Wheeled Feller Buncher. This machine has a 8.1L John Deere engine that was rebuilt approximately 1,000-1,500 hours ago, 11,500 frame hours, new blade, new transfer case approximately 1,000-1,500 hours. Strong hydraulics and cylinders. Tight center section, cradles are in good working order, straight disc good teeth, 22" cut. 30.5 x 32 tires. Heat, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD***

Hydro-Ax 711EX Unknown
$Call for Price
Hydro Ax 711 Feller Buncher

Hydro Ax 711 Feller Buncher

1999 Hydro Ax 711 Feller Buncher. Hour meter reads 12,032 hours. John Deere 8.1L engine starts and runs good. 28Lx26 tires are estimated at 70%, one is at 15%. One brand new tire can go with for additional cost. Few pins are loose, center is tight. Chains can also be included for an additional cost. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

Hydro-Ax 711 1999
$22,900
2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH

2014 JOHN DEERE 703JH TRACKED HARVESTER 6 CYL DEERE

John Deere 703JH 2014
$119,000
John Deere 703 JH Processor ***ON HOLD***

John Deere 703 JH Processor ***ON HOLD***

2012 John Deere 703 JH Processor with a Waratah 622B Processing Head. Well maintained machine with a 6081 Engine that starts and runs good. Has Proheat - works great. New pumps on carrier and a lot of new parts and hoses in head last spring. New saw motor, saw housing, resealed main valve in head. Alpine feed wheels. New glass. 26" double grouser pads, undercarriage is in good working condition. Stereo, Heat, & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***ON HOLD***

John Deere 703JH 2012
$144,500
John Deere 703JH with Waratah HTH622B Harvesting Head

John Deere 703JH with Waratah HTH622B Harvesting Head

2012 John Deere 703JH with Waratah HTH622B Harvesting Head. Hour meter reads 14,020 hours. 24" single grouser pads, undercarriage is estimated at 30%. Main saw motor resealed July 2021, new computer on head December 2021, new encoders on saw and diameter. New computer for the head, can include a spare. Espar preheater. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2012
$83,500
John Deere 703JH with Waratah 622B Processing Head

John Deere 703JH with Waratah 622B Processing Head

2009 John Deere 703JH with Waratah 622B Processing Head. Hour meter reads 18,126 hours. John Deere 6081H engine. 24" single grouser pads, undercarriage is estimated at 65%. Espar preheat system. Suregrip joystick controls, heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

John Deere 703JH 2009
$139,500
John Deere 703JH with a Waratah 616 Processing Head

John Deere 703JH with a Waratah 616 Processing Head

2014 John Deere 703JH with a Waratah 616 Processing Head. John Deere 6068 engine. Espar preheat system. 24" double grouser pads, undercarriage is brand new except for the pads. Hydraulic pumps were done around 6,000 hours. Timbermatic measuring system is in good working condition, Suregrip joysticks. Clean cab, heat, A/C, radio, lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 703JH 2014
$155,000
John Deere 703G Harvester

John Deere 703G Harvester

2006 John Deere 703G Harvester. This equipment has 15,430 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 50%, new tracks, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.

John Deere 703G 2006
$92,500
2006 John Deere 703G

2006 John Deere 703G

2006 John Deere 703G Harvester. This equipment has 15,477 hours, runs and starts good, Waratah 616 processing head with top saw, newer bearings, 33' squirt boom, tight pins and bushings. Undercarriage is estimated at 70%, strong hydraulics, swing gear is in good condition. One new final drive, all pumps have been gone through, new rear seal, and the main and stick cylinders have been rebuilt. Heat, A/C, and lights. Log-Rite system, touch screen update. Contact Delvin @ (715) 699-6271 or (715) 634-1555

John Deere 703g 2006
$95,000