Photo |
Title
|
Make | Model | Year | Price |
2006 Hyundai 250 LC-7 Log Loader High WalkerGreat Machine, High Walker chassis, Cab shield, auxiliary hydraulic, double grouser pads, bucket available 5500 hrs ready to work!!! |
Hyundai | R 250 LC-7 | 2006 |
$Call for Price
|
|
Clark Ranger 664B SkidderClark Ranger 664B Cable Skidder. Detroit 353 diesel engine. 18L-26 tires are estimated at 25%. Rear ends, driveshaft, and blower on the engine were all reabuilt. Brakes were done recently. Winch is strong. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Clark | Ranger 664B | Unknown |
$18,500
|
|
Clark Ranger 667 SkidderClark Ranger 667 Grapple Skidder with Winch. Newer Perkins engine installed with 1,500 hours. 23.1x26 tires, estimated at 50%, both sets of chains are included. Center and arch pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Canada. |
Clark | Ranger 667 | Unknown |
$26,000
|
|
Clark 667D Grapple Skidder with Winch ***SOLD***1986 Clark Ranger 667D Grapple Skidder with Winch. 6BTA engine is newer. New injector pump. 24.5x32 tires are estimated at 55%, includes a spare tire and wheel, & set of diamond studded ice chains that are estimated at 20%. 100" Esco grapple. Bought machine new in 1986 and has had the same operator. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD*** |
Clark | Ranger 667D | 1986 |
$Call for Price
|
|
Valmet/Clark Ranger F66 Skidder1993 Valmet/Clark F66 Ranger Grapple Skidder. Hour meter reads 10,813 hours, frame hours are unknown. Cummins 5.9 engine starts and runs good. 30.5x32 tires are estimated at 50%. Includes a set of double diamond chains that are estimated at 80%. Center and arch pins are tight. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Clark | Ranger F66 | 1993 |
$27,500
|
|
Clark Ranger F665 Cable Skidder1988 Clark Ranger F665 Cable Skidder. Hour meter reads 5,812 original hours. 3 speed Power Shift transmission. 23.1-26 Firestone tires are estimated at 70%, duals on the rear. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Clark | Ranger F665 | 1988 |
$20,000
|
|
Clark Ranger F666 Skidder1988 Clark Ranger F666 Grapple Skidder. Cummins 5.9 engine, Clark 3 speed transmission. Front tires estimated at 95% tread, rear tires are estimated at 25%. Driveshaft for winch is new & has a new 100' 5/8" mainline and 1/2" chokers. Center and arch pins are tight. Heat. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Clark | Ranger F666 | 1988 |
$28,500
|
|
Rottne Rapid SMV Forwarder2001 Rottne Rapid SMV Forwarder. This machine has a newer John Deere 6068T engine with 2,000 hours, runs and starts good, strong hydraulics, newer drive pump, tight center section has been reinforced, boom is solid. New swing bearing in pedestal, grapple has a little play. One bogie has been replaced, 710 tires @ 50%, set of tracks, heat, radio and lights. A/C needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Rottne | Rapid | 2001 |
$72,500
|
|
Rottne Rapid Forwarder2004 Rottne Rapid Double Bunk 6 Wheel 12 Ton Forwarder. This equipment has a John Deere 4045 4 cyl. engine, runs and starts good, head gasket at 10,000 hours. Hydrostatic pump and motor replaced @ 10,000 hours, 2 new planetaries @ 10,000 hours, 2 @ 13,500. Tracks and chains @ 30%. Lots of new parts, one extra tire, two extra bogies. Machine has 14,200 frame hours, tight boom, extended boom in good working order, over size oscillation bearing. Heat, A/C, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Rottne | Rapid | 2004 |
$92,500
|
|
Rayco RG1220 Brush Chipper2011 Rayco RG1220 Brush Chipper. Hour meter reads 225 hours. Kubota 66.8 HP engine starts and runs good. Pre-emission engine. 12" chipping capacity with a 12"x20" in-feed opening. Intake rate of 100 fpm. Discharge swivels 360° and at a discharge height of 112". Feed wheel lift and crush handles on both sides. New battery. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Rayco | RG1220 | 2011 |
$38,500
|
|
Hyundai Robex 210 LC-3 Yoder1997 Hyundai Robex 210 LC-3 Yoder. Hour meter reads 8,838 hours. 28" triple grouser pads, undercarriage is estimated at 75%. Dry valve bank. Tight boom & thumb bucket. Hydraulics are strong. Enclosed cab has heat & radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hyundai | Robex 210 LC-3 | 1997 |
$98,000
|
|
Hyundai Robex 210LC-7 with Propac 453 Delimber2005 Hyundai Robex 210LC-7 with Propac 453 Delimber. Hour meter reads 12,710 hours. Cummins 5.9 engine. This machine has a new boom as of 2019, some work has been done on the head, undercarriage is at about 60%. 28" triple grouser pads. Propac 453 Delimber works well. Straight, dry machine. Hours may increase because it's currently in use. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Hyundai | Robex 210LC-7 | 2005 |
$60,000
|