Photo |
Title
|
Make | Model | Year | Price |
Morbark 40/36 Drum Chipper ***SOLD***2011 Morbark 40/36 Drum Chipper. Hour meter reads 2,978 hours. CAT C18 engine starts and runs good. Drum itself is in good condition, no cracks or welds. 23" chipping capacity. 40"x39" infeed opening. Hydraulic knuckleboom loader with 23' extended boom reach. 2537 log grapple with 360° continuous rotation. Single grouser pads, undercarriage is estimated at 90%. Valve banks are dry and clean. Espar preheater. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. ***SOLD*** |
Morbark | 40/36 | 2011 |
$Call for Price
|
|
Morbark 40/36 Drum Chipper2011 Morbark 40/36 Drum Chipper. Hour meter reads 3,700 hours. CAT C18 engine starts and runs good. Advantage 3 drum is in good condition. 23" chipping capacity. 40"x39" infeed opening. Hydraulic knuckleboom loader with 23' extended boom reach. 2537 log grapple with 360° continuous rotation. Single grouser pads, undercarriage is estimated at 70%. Valve banks are dry and clean. Espar preheater. Enclosed cab has heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Morbark | 40/36 | 2011 |
$305,000
|
|
Morbark 40/36 Whole Tree Drum Chipper2009 Morbark 40/36 Whole Tree Drum Chipper. Hour meter reads 5,500 hours. Newer CAT C15 630 HP engine has 4,000 hours. Newer style Vantage drum is in good condition. Anvil has been redone & upgraded bed chains at 4,000 hours. New clutch disc in 2022. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Morbark | 40/366 | 2009 |
$177,500
|
|
Timberjack 404 Cable Skidder1970 Timberjack 404 Cable Skidder. This machine has a Detroit 453 engine, runs and starts good, strong hydraulics and Allison auto 3 speed transmission, tight center section, Gearamatic model 19 winch, like new 18.4x34 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northwest USA. |
Timberjack | 404 | 1970 |
$16,500
|
|
HSM 405 H2 Steep Slope Harvester2013 HSM 405H2 Steep Slope Harvester. This machine has approx. 5,000 hours, engine and the crane replaced at 4,000 hours, IVECO engine 6.7L, NAF balanced portal tandem axles, 100% selectable differential lock, machine has steep slope winch mounted on unit. The head is a Logmax 6000, Loglift crane, tilting cab, spare tire, air cushioned heated seat. 710 tires and tracks. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada. |
HSM | 405 H2 | 2013 |
$Call for Price
|
|
Prentice 410E Loader with Ground Saw & Delimber *ON HOLD*1999 Prentice 410E Loader, Ground Saw, and CTR Pull Through Delimber. This equipment has a Cummins engine, runs and starts good, strong hydraulics, tight joystick controls, tight boom, main cylinder was just rebuilt, continuous rotation grapple, Delimber and ground saw are in good working order, decent tires and brakes, heat, lights, A/C is not working. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. ***ON HOLD*** |
Prentice | 410E | 1999 |
$33,500
|
|
Hydro Ax 411B Feller Buncher1982 Hydro Ax 411B Feller Buncher. Detroit 453 engine. 23.1x26 tires are estimated at 85%. Can include a set of ring chains at 50% for an additional cost. Shear head is tight and in good working order. Enclosed cab with heat & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Hydro-Ax | 411B | 1982 |
$17,000
|
|
Timbco 415 Feller Buncher with Quadco 20B 40° HeadTimbco 415 Feller Buncher with Quadco 20B 40° Head. Hours are unknown. Cummins 8.3 engine starts and runs good. 24" triple grouser pads, missing a few tracks pads, undercarriage is estimated at 20%. Final drives are good. Turntable has slack. Quadco 20B 40° head, saw cover has a large crack, disc & teeth are good. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timbco | 415 | Unknown |
$15,000
|
|
Timbco 415 Feller Buncher with Koehring 20" Head1995 Timbco 415 Feller Buncher with Koehring 20" Head. Hour meter reads 11,833 hours. 500 hours on new Cummins 5.9L engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins & bushings in boom are tight. New lift cylinder has 20 hours on it. Heat, A/C, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timbco | 415 | 1995 |
$41,500
|
|
Timbco 415C Harvester with a Ponsse H73 Processing Head1998 Timbco 415C Harvester with a 2006 Ponsse H73 Processing Head. Hour meter reads 8,900 hours. John Deere 6068T engine. 24" single grouser pads, undercarriage is estimated at 70%. Pins and bushings are good. Rebuilt hydraulic pump 400 hours ago. The 2006 Ponsse H73 Processing Head has an estimated 4,500 hours. Grab arms and feed rollers are in good working order. Heat, A/C, radio, & lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$47,500
|
|
Timbco 415C Harvester with a Ponsse H73 Head1998 Timbco 415C Harvester with a Ponsse H73 Head. This equipment has a John Deere 6068T engine, runs and starts good, strong hydraulics and cylinders. Undercarraige is in good working order, single grouser pads. Ponsse H73 head is solid, grab arms and feed rollers are all in good working order, measuring system works as it should, Ponsse 1000 computer. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Timbco | 415C | 1998 |
$52,500
|
|
Timbco 415EX with Valmet 370E Processing Head2005 Timbco 415EX with Valmet 370E Processing Head. Frame hours are unknown, hour meter reads 6,508 hours. Sisu engine starts and runs good. Reversing fan in working order, new alternator. 24" double grouser pads, undercarriage is estimated at 85%. Pins, bushings, and swing bearing are tight. Squirt boom. Valmet 370E processing head is in good working order, one feed wheel motor could be resealed. Heat, A/C, radio, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Timbco | 415EX | 2005 |
$54,900
|