Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	John Deere 3554 with Waratah 624 *SOLD* 2004 John Deere 3554 with Waratah 624 Super Processing Head. Hour meter reads 20,649 hours. John Deere 6081H engine starts and runs good. 28" double grouser pads, undercarriage is estimated at 70%. New computer in the head, recently resealed valves in the head, rebuilt measuring wheel, and repacked cylinders for feed rollers. Air intake preheater, heat, A/C, & Bluetooth radio. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. *SOLD*	John Deere	3554	2004	$Call for Price
	Bandit 3590XL Whole Tree Chipper 2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA	Bandit	3590XL	2010	$Call for Price
	Timberking 360 Feller Buncher 2005 Timberking 360 Feller Buncher. New paint job equipped with a Waratah Saw Head. Engine has 6,102 original hours Tires are 28L x 26 at 90% tread, tight center section, enclosed cab with heat, Radio and Air Conditioning, new starter, new battery with new hydraulic hoses. Machine is 9'6" wide, extremely fast cutter. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Southeast USA.	Timberking	360	2005	$46,500
	Timberjack 360C Skidder 1996 Timberjack 360C Grapple Skidder with Winch. New Reman Cummins 6BT engine starts and runs good. 24.5x32 Firestone tires are estimated at 50%. For an additional $4,000, 23.1x26 tires can be put on, 90% fronts and 75% rears, includes a set of bear paw chains. New center pins. Wider custom blade is currently on the machine but will be replaced with an OEM blade before sale. Heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Timberjack	360C	1996	$60,000
	Bandit 3680 Beast Horizontal Grinder 1997 Bandit 3680 Beast Horizontal Grinder. John Deere engine starts and runs good. 375 HP. Remote control. 300-500 yards per hour. 500 gallon fuel tank, 140 gallon hydraulic tank. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Bandit	3680 Beast	1997	$97,500
	Timberjack 380 Dual Arch Grapple Skidder *SOLD* 1985 Timberjack 380 Dual Arch Grapple Skidder. 200 hours on new Cummins engine. New windows on back and sides. Tires are estimated at 50%, includes a set of chains. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Timberjack	380	1985	$Call for Price
	Morbark 3800 Horizontal Grinder 2009 Morbark 3800 Horizontal Grinder. Hour meter reads 4,031 hours. Cummins QSX 15 630hp engine. New Indeed wheel gear box. Hard faced hammer mill. Conveyor belts in good condition with super screw lacing. Skirting is in good condition. Spray bar is plumbed into hammer mill, Colorbiotics color pump can be included. Several screens as well as enough spare wear parts for at least a year. Pallet of King Kong tips go with as well. No hydraulic leaks. Ready to grind. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Morbark	3800	2009	$200,000
	1989 Timberjack 380B Skidder 1989 TIMBERJACK 380B GRAPPLE SKIDDER 6 CYL CUMMINS POWERSHIFT 24.5-32 RUBBER NEW TURBO ON ENGINE NEW TRANSMISSION FROM VALLEY	Timberjack	380B	1989	$34,900
	Prentice 384 Loader 2004 Prentice 384 Loader. Hour meter reads 14,727 hours. Cummins engine starts and runs good. Turn table, boom, and grapple are tight, hoses are good, includes an extra grapple. Tires are in good condition. Heat, lights, & radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southcentral USA.	Prentice	384	2004	$19,500
	Prentice 384 Loader with Riley 6600 Delimber *SOLD* 2006 Prentice 384 Loader and a Riley 6600 Delimber with Topping Saw. Owner stated that this unit has no engine, Cummins 5.9 engine was removed. Entire fuel system has been replaced recently - 4 injectors, fuel pump, injection pump, transfer pump, injector lines and supply lines. Tight pins in boom, strong hydraulics, hydraulic pump has been replaced recently. Owner said that this loader is on a Kodiak trailer with hydraulic landing gear, joystick controls have been rebuilt. Owner said that this loader will need a new instrument panel or to be re-wired. Both the OEM and Cummins wire harnesses have been replaced from underneath cab to engine. All paperwork available on recent updates and repairs. Tires 60%, good brakes, Heat and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. is located in Southwest USA. REDUCED from 18,900. *SOLD*	Prentice	384	2006	$Call for Price
	Prentice 384 Loader with 60" Slasher 2007 Prentice 384 Loader. Hour meter reads 9,800 hours. Cummins 5.9L engine starts and runs good. Loader is tight. New hoses. Big John trailer has good tires. 60" slasher has a good blade and teeth, one bunk is busted off. Heat, A/C, radio, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Prentice	384	2007	$34,500
	Morbark 40/36 Chipper 2015 Morbark 40/36 Chipper. Hour meter reads 2,955 hours. CAT 765 HP engine starts and runs good. No dents on the belly. Drum pockets are in good working order, drum has some welds. Feed chain and sprocket show no wear, & hydraulics are strong. Chassis and frame are good, chute frame has some welding near blower. Tires and brakes are in excellent condition. LED display. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Canada.	Morbark	40/36	2015	$359,000