Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Bandit 3590XL Whole Tree Chipper 2010 Bandit 3590XL Whole Tree Chipper. Hour meter shows ~6500 hours. CAT C27 1050 HP w/ optional engine chip to 1370 HP. Engine runs and starts good. Hydronic engine preheated. PT tech clutch. Extended frame, to offset radiator from the engine. Hydraulic reversing fan which increases HP to the chip drum. Upgraded feedbox wall plates to 2" AR 450. Chip pocket upgrades, overs breakers. Overs breaker grates upgrade that bolt in at drum chute. The following upgrades were made at 6,467 hours. New brakes and bearings, new top side of chute, new drum belly wear plate, new infeed chain sprockets, new manifolds and studs 6,467 hours. 36+ inch chipping capacity. Set up for .75" chip size, 2.75+ tons per minute capacity. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA	Bandit	3590XL	2010	$Call for Price
	Bandit 280 Chipper with Grapple & Winch 2005 Bandit 280 Chipper with Grapple & Winch. Hour meter reads 1,300 hours on engine, 875 hours on auto feed. Newer 275 HP engine was installed. Includes extra knives, anvil, & bolts. Pintle hitch. Rated for 18" logs but can chip bigger. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast.	Bandit	280	2005	$84,500
	Bandit 3680 Beast Horizontal Grinder 1997 Bandit 3680 Beast Horizontal Grinder. John Deere engine starts and runs good. 375 HP. Remote control. 300-500 yards per hour. 500 gallon fuel tank, 140 gallon hydraulic tank. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Bandit	3680 Beast	1997	$97,500
	Bandit Beast 3680T Horizontal Grinder *SOLD* 2017 Bandit Beast 3680T Horizontal Grinder. Hour meter reads 400 hours. CAT 1,050 HP engine starts and runs good. Belts are in good condition. Caterpillar 325EL undercarriage is in good working order. 14' 9" long x 60" steel infeed conveyor. 20" diameter feed wheel controlled via remote control. 42" diameter x 63" wide cuttermill with 30 teeth. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. *SOLD*	Bandit	Beast 3680T	2017	$Call for Price
	Bandit 1850 Track Chipper 2006 Bandit 1850 Track Chipper. Hour meter reads 6,025 hours. Cummins 330 HP engine. One owner chipper. Loader works as it should. Undercarriage is in good condition. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Bandit	1850	2006	$114,900
	Bandit 2290TK Track Chipper 2015 Bandit 2290TK Track Chipper. Hour meter reads 4,850 hours. John Deere RG6135 525hp engine. Newer clutch with around 750 hours. 24" single grouser pads, undercarriage is estimated at 75%. Drum is in good condition. Ready to work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Bandit	2290TK	2015	$210,000
	Bandit Intimidator 15XP Chipper 2021 Bandit Intimidator 15XP Chipper. Hour meter reads 1,543 hours. Ford 6.2L 165 HP engine. 37" diameter drum, 2 knife split pocket 5/8" chip. Single axle allow for towing as non-CDL trailer. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Bandit	Intimidator 15XP	2021	$49,500
	Bandit 1850XP Tracked Chipper 1998 Bandit 1850XP Track Chipper. Hour meter reads 4,000 hours, unknown if original. New Cummins 250hp engine and new glass. New master switch. Boom and grapple are tight. Ready for work. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	Bandit	1850XP	1998	$81,500
	60" Slasher 60" Slasher. Blade and carbide teeth are in good condition. One new tire. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA.	-	60"	Unknown	$11,000
	2011 1210E This is a very nice straight machine that looks to be taken care of very meticulously! It has a spin cab, Extend a boom, the panels, doors, glass, and guards are are in great shape. There is a webasto pre heater installed on this unit as well. We do take trades and we can assist with trucking and financing as well. Thank you for looking!	-	-	2023	$149,500
	2017 Logset Machine is ready to work	-	8F	2017	$Call for Price
	Logging Bridges Steel Bridges 30' Bridge -$14,500 (Set of 3 Panels) 40' Bridge- $21,000 (Set of 3 Panels) Each Panel is 4' wide. We can also build other lengths. -These are well known and proven with hundreds of sets sold and extremely happy customers. They have been tested with 110,000 pound machine in the center. They are capable of trucks, logging equipment, and log trucks, excavating equipment. They are weight certified for those contractors that need that. Please contact us for more info about the certification!! -Solid all steel I beam construction -2 chain points on each side for easy loading and moving - they can be heeled with a grapple. - 30 footers are 10 inches height in the center tapered to 6 inch entry at each sides. -40 footers are 12 inch in height in the center and tapered to 6 inches at each end. -Extras available - side rails, pedestrian handrails, extra grip. These are made for contractors by a longtime logger -Custom Bridges are available! - ATV and tractor bridges as well as pedestrian crossings and anything up to 50' Loading or delivery is available as well Visit us at Mastequipment.com *Great for crossing streams or gullies	-	-	2024	$14,500