Photo |
Title
|
Make | Model | Year | Price |
Franklin C5000 Wheeled Feller Buncher2000 Franklin C5000 Wheeled Feller Buncher with a Koehring 20" Saw Head. This buncher has a Cummins 5.9 engine, runs and starts good, strong hydraulics and cylinders. Machine runs and operates as it should. 30.5 x 32 tires @ 30% with chains. Heat and new glass. Unit just got a new front main seal and new timing cover gasket. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Franklin | C5000 | 2000 |
$21,500
|
|
Franklin 170 Grapple Skidder1990 Franklin 170 Grapple Skidder. Rebuilt Detroit 453 engine with 15 hours, starts and runs good. PowerShift transmission. 1st, 3rd, and 4th gear are working well, 2nd gear has some issues. 35.5 tires are estimated at 40%. Grapple and winch are in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Franklin | 170 | 1990 |
$14,500
|
|
Franklin 100XL Cable Skidder1977 Franklin 100XL Cable Skidder. Detroit 353 diesel engine. 16.9-30 tires are estimated at 90% in the rear, 25% in the front, with a set of double diamond studded ice chains. C4 rear ends were installed. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Franklin | 100XL | 1977 |
$16,500
|
|
Franklin Q90 Skidder2005 Franklin Q90 Grapple Skidder with Winch. Hour meter reads 6,490 original hours. Cummins 8.3L engine starts and runs good. 30.5x32 tires, 2 are estimated at 85%, the other 2 at 10%. Dual rings on the front. Winch is in good working order. Heat, A/C, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southeast USA. |
Franklin | Q90 | 2005 |
$30,000
|
|
Ford F600 Log Truck with a Husky XL220 Log Loader1977 Ford F600 Log Truck with a Husky XL220 Log Loader. The truck has a dual axle carrier, 5&4 transmission, 477 gas motor, engine has been switched to a Cummins. newer continuous rotation grapple, ~19,000 hours, 6,000 hours on Cummins motor and new pumps. Starts, runs and functions well. Main boom cylinder was replaced, gear box for the turn table is all rebuilt. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Southwest USA. |
Ford | F600 | 1977 |
$28,500
|
|
FORD L9000 with Barko 130B Loader1996 FORD L9000 with Barko 130B Loader. Odometer reads 196,386 miles. N14 engine starts and runs good, 13 speed transmission. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Ford | L9000 | 1996 |
$Call for Price
|
|
Farma 6.3 Loader on Roadster Trailer2017 Farma 6.3 Loader on Roadster Trailer. Pulled less than 2,500 miles. Honda engine starts and runs good. 42" grapple with continuous rotation. 20.5' max reach. 360° boom rotation. Outriggers in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Southwest USA. |
Farma | 6.3 | 2017 |
$38,500
|
|
Fabtek 546C Forwarder2000 Fabtek 546C 6 Wheel Double Bunk Forwarder. This machine has a 6.8 PowerTec engine, runs and starts good, rebuilt transmission and converter, Preheater. Strong hydraulics and cylinders, front tires are 30.5x32, tracks and chains, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 546C | 2000 |
$89,900
|
|
Fabtek FT 133 Processor with a 4 Roller Head2004 Fabtek FT 133 Processor with a Fabtek 4 Roller Head. This machine has 12,991 hours, runs and starts good, strong hydraulics and cylinders, head is in working order, tight pins and bushings, undercarriage is in good working condition, heat, A/C, and lights. Kawasaki pump and updated U/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA |
Fabtek | FT133 | 2004 |
$83,500
|
|
Fabtek FT-153 Processor with 4 Roller Head2005 Fabtek FT-153 Processor with 4 Roller Head. This equipment runs and starts good, John Deere engine, complete over haul 3 months ago, undercarriage track rollers and sprockets updated 1 year ago, 24" triple grouser, main and final drive pumps new this last summer. Head rollers, grab arm, and saw are in good working order, having issues with measuring system, tight main boom, strong cylinders, Pro-Heat new pump, heat, A/C, decent glass. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Fabtek | FT-153 | 2005 |
$90,000
|
|
Fabtek FT-133 Harvester with a Fabtek 4 Roller Head2000 Fabtek FT-133 Harvester with a Fabtek 4 Roller Head. This machine has new pumps, new engine, 1,500 hours on both. Decent undercarriage. Final drives have been resealed, new oil cooler, 3rd measuring wheel, proheat. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | FT-133 | 2000 |
$89,500
|
|
Fabtek 153 Harvester2001 Fabtek 153 Harvester has a JD reman 6068 power unit that is in good working order. Starts and runs good. Just went through undercarriage and it's in excellent condition. All 4 Rotate motors just resealed, main pump is new, head tilt cylinder just resealed, and both valve banks just resealed. Independent measuring wheel. New glass. Heat, AC (just redone). Head is in good condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Fabtek | 153 | 2001 |
$79,500
|