Sort By:   GridGallery
Photo Title
Make Model Year Price
Barko 885B Feller Buncher

Barko 885B Feller Buncher

2003 Barko 885B Feller Buncher. This buncher has 10,512 hours, Cummins engine, runs and starts good, new pump and hydrostatic motor, new seals, tight pins and bushings, head in good working condition, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Barko 885B 2003
$56,500
CAT 533 Feller Buncher ***SOLD***

CAT 533 Feller Buncher ***SOLD***

2003 CAT 533 Feller Buncher with a 221 Felling Head. This machine has 6,282 total hours, CAT 3126 Power, dry machine no leaks, good brakes, tight pins and bushings, 30.5x32 tires, fronts have 100 hours on them and the rears are at at 75%, brand new seat, heat, and A/C. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***REDUCED FROM $85,500.00*** ***SOLD***

CAT 533 2003
$77,500
CAT 535B D/A Grapple Skidder ***SOLD***

CAT 535B D/A Grapple Skidder ***SOLD***

2003 CAT 535B D/A Grapple Skidder with Winch. This machine runs and starts good, has a rebuilt transmission, new center section, new 30.5.32 tires. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada. ***SOLD***

CAT 535B 2003
$79,000
2003 Fabtek 344B Forwarder

2003 Fabtek 344B Forwarder

FABTEK 344B SINGLE BUNK FORWARDER 4 CYL JOHN DEERE POWERSHIFT JOYSTICK CONTROLS EXTENDABOOM 28L-26 RUBBER

Fabtek 344B 2003
$Call for Price
Fabtek 153 Processor with a Fabtek 4 Roller Head

Fabtek 153 Processor with a Fabtek 4 Roller Head

2003 Fabtek 153 Processor with a Fabtek 4 Roller Head. This machine has a John Deere 6068 6.8 liter engine, runs and starts good, 9,475 hours, strong hydraulics and cylinders, newer pump, head has been reworked, new pins and bushings, measuring system and computer are in good working order, feed rollers and chains are in good condition. One new final drive motor, undercarriage is @ 90%, double grouser pads, Pro Heat system. New radiator, new batteries, heat LED lights, A/C was just recharged. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

Fabtek 153 2003
$77,950
John Deere 648GIII D/A Grapple Skidder

John Deere 648GIII D/A Grapple Skidder

2003 John Deere 648GIII Dual Arch Grapple Skidder. Owner stated that this machine has 10,000 hours, but was rebuilt at 6,000 hours, runs and starts good. Owner said that this machine has strong hydraulics, tight pins, good bushing, heat A/C, tires 25% with ring chains in the front and ice chains in the back. This machine was well maintained. Ready to work. Contact Erik @ Red Pine Equipment 218-720-0933. Machine located in Northeast USA.

John Deere 648GIII D/A 2003
$64,999
John Deere 640GIII Skidder

John Deere 640GIII Skidder

2003 John Deere 640GIII Cable Skidder. This machine has a rebuilt engine a year and a half ago, new center pin at 100%, strong hydraulics, all leaks and hoses just gone through, new bottom drive shaft, rebuilt front end, transmission just serviced, new wiring harness, extra transmission goes with, 23.1x26 tires @ 25-30% with chains and Eco tracks. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.

John Deere 640GIII 2003
$52,000
John Deere 653G Feller Buncher ***SOLD***

John Deere 653G Feller Buncher ***SOLD***

2003 John Deere 653G Feller Buncher. This buncher has a good running John Deere engine, strong hydraulics and drive system. good cylinders, hour meter reads 7,857 hours, tight pins and bushings on the boom and head, 36" pads. Head is a Waratah FS20 straight disc, grab arms are in good condition. Heat, A/C, and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***SOLD***

John Deere 653G 2003
$52,500
Morbark 30RXL Chipper  ***SOLD***

Morbark 30RXL Chipper ***SOLD***

2003 Morbark 30RXL Chipper. This machine runs and starts good, strong hydraulics, wireless remote control with tethered backup, 30” x 10’ CAT chain infeed bed (RXL ). 30” diameter chipping capacity, 83” diameter three-knife chipper disc with LH rotation, loader with cab, chipper is in good working condition. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine located in Canada. ***SOLD***

Morbark 30RXL 2003
$126,500
Ponsse Ergo Harvester with a H73E Head

Ponsse Ergo Harvester with a H73E Head

2003 Ponsse Ergo Harvester with a H73E Head. This machine has a Mercedes Benz engine, 1,200 hours on new motor, runs and starts good, pre-heater, strong hydraulics and cylinders, tight boom and boom base, H73E head has good rollers and grab arms, measuring system and control are in good order, tires, track tires, and tracks are in good shape. Heat, A/C, lights, and radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Ponsse Ergo 2003
$159,500
Prentice 620FB Feller Buncher

Prentice 620FB Feller Buncher

2003 Prentice 620FB Feller Buncher. This machine has a Cummins 6BT engine runs and starts good, strong hydraulics, all pumps have been gone through, tight boom. Strong cylinders, 22" Koehring 40 degree head, grab arm has a bit of play not bad, disc has a crack, leveling system is in good working order, undercarriage is @ 75%, new rollers, 24" SG pads, heat, and lights. A/C needs to be charged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.

Prentice 620FB 2003
$62,500
Rottne SMV 8 Wheel Forwarder

Rottne SMV 8 Wheel Forwarder

2003 Rottne SMV 8 Wheel Forwarder. This machine has 500 hours on a new John Deere engine, has had many updates, strong hydraulics, good cylinders, front end was just re-done, strong bogies, tight boom and grapple, 700 tires, 2 are new, the other 3 are @ 70%, two sets of good tracks, heat. A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Canada.

Rottne SMV 2003
$85,900