Logging Equipment For Sale

Sort By:

Photo	Title	Make	Model	Year	Price
	Prentice 210D Self-Propelled Loader with 60" Siiro Slasher Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat, lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	210D	Unknown	$17,000
	Prentice 210D Self-Propelled Loader with 60" Siiro Slasher Prentice 210D Self-Propelled Loader with 60" Siiro Slasher. Hour meter reads 16,482 hours. John Deere 6059T engine starts and runs good but will need a head gasket. 60" Siiro Slasher has a cracked blade and the ears that hold the motor will need to be welded. All the cylinders on the boom have been rebuilt. Heat and lights. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Prentice	210D	-	$17,500
	2010 PRENTICE 2346 2010 PRENTICE 2346 DOUBLE BUNK FORWARDER 4 CYL CAT POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 23.1-26 FRT 600/55-26.5 REAR	Prentice	2346	2010	$169,000
	Rayco T275 Stump Grinder *SOLD* 2010 Rayco T275 Stump Grinder. Hour meter reads 1,617 hours. CB275 Hydra-Stumper stump grinder with 56 Rayco monster teeth. John Deere 275hp turbo diesel engine. High pressure hydrostatic to Gates Polychain GT. 24" double grouser pads, undercarriage is estimated at 40%. Clean air system. Pilot joystick controls. Heat, A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Rayco	T275	2010	$Call for Price
	Rayco RG1220 Brush Chipper 2011 Rayco RG1220 Brush Chipper. Hour meter reads 225 hours. Kubota 66.8 HP engine starts and runs good. Pre-emission engine. 12" chipping capacity with a 12"x20" in-feed opening. Intake rate of 100 fpm. Discharge swivels 360° and at a discharge height of 112". Feed wheel lift and crush handles on both sides. New battery. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA.	Rayco	RG1220	2011	$38,500
	2006 RISLEY EZ2200 2006 RISLEY EZ2200 TRACKED HARVESTER CAT 3126 NEW UNDER CARRIAGE QAUDCO HEAD	RISLEY	EZ2200	2006	$99,000
	Rotobec F2000B Forwarder 2000 Rotobec F2000B Single Bunk Forwarder. Hour meter reads 15,307 hours. Cummins 4BT engine with new bottom end bearings. New turbo. 18.4-26 tires are estimated at 80%, includes chains. Crane and center are tight. Hydraulic pump is newer with 1,500 hours, jib cylinder has 300 hours. Heat, radio. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Canada.	Rotobec	F2000B	2000	$36,500
	Roto Chopper B66 Chipper *SOLD* 2011 Roto Chopper B66 Chipper. This chipper has 300 hours on a complete factory recondition, new engine, C16 CAT 785 HP, runs and starts good. New drive pumps and belts. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. *SOLD*	Rotochopper	B66	2011	$Call for Price
	Rotochopper B66T Horizontal Grinder *ON HOLD* 2016 Rotochopper B66T Horizontal Grinder on Tracks with Tri-Axle Carrier. This equipment has a 950 HP CAT C27 Tier 2, runs and starts good, very powerful, strong hydraulics, grinder is in good working order, Colorizer with complete skid mount. Approx. 1,900 hours, remote control, undercarriage is @ 90%, Tri-axle highway transport dolly. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. *ON HOLD*	Rotochopper	B66T	2016	$Call for Price
	Rotochopper MC256 Horizontal Grinder *SOLD* Rotochopper MC256 Horizontal Grinder. C10 440hp engine is newer, starts and runs good, will need a new oil pan. Standalone colorizer with dual pump. Like new mill, bearings, & screen. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. *SOLD*	Rotochopper	MC256	Unknown	$Call for Price
	Rottne H20 Harvester with a Logmax 7000 Head 2006 Rottne H20 Harvester with a Logmax7000 Head. This machine has a John Deere engine, runs and starts good, Logmax has new feed rollers, new saw motor, computer is in good working order, strong hydraulics, no leaks, tight center section, tight boom, main pin was just replaced, repacked jib boom cylinders, cab rotation is in good condition, bogies and axles are in good order, pre-heater, 750 tires @ 50% with tracks. Heat, A/C and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA.	Rottne	H20	2006	$162,000
	Rottne Rapid SMV Forwarder 2001 Rottne Rapid SMV Forwarder. This machine has a newer John Deere 6068T engine with 2,000 hours, runs and starts good, strong hydraulics, newer drive pump, tight center section has been reinforced, boom is solid. New swing bearing in pedestal, grapple has a little play. One bogie has been replaced, 710 tires @ 50%, set of tracks, heat, radio and lights. A/C needs charge. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA.	Rottne	Rapid	2001	$72,500