Photo |
Title
|
Make | Model | Year | Price |
KMC 2500 Track Grapple Skidder with a Winch2019 KMC 2500 Track Grapple Skidder with a Winch. Hour meter reads 400 hours. Cummins 6BTA 5.9 Tier III engine: 174 HP, Clark 4 Speed Powershift Transmission. Joystick controls. Max Speed: 14.5 MPH. Max Payload: 35,000 lbs. Young Dual Arch, Esco 110" Grapple with a Clark Winch. 18" track. Enclosed cab with heat & A/C. Designed for steeper terrain and soft ground. 1" mainline. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
KMC | 2500 | 2019 |
$255,000
|
|
KMC 2500 Skidder2018 KMC 2500 Track Grapple Skidder with a Winch. Hour meter reads 744 hours. Cummins 6BTA 5.9 Tier III engine with 174 HP, Clark 4 Speed Powershift Transmission. Joystick controls. Max Speed: 14.5 MPH. Max Payload: 35,000 lbs. 46,000lb machine. Young Grapple with a Clark Winch with a 1" mainline. Newer 18" track that has 250 hours, estimated at 95%. Extra pads and track tighteners are included. New starter. Enclosed cab with heat & A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
KMC | 2500 | 2018 |
$240,000
|
|
Kobelco 260 with SP761 Dangle Head Processor2022 Kobelco 260 with SP761 Dangle Head Processor. Hour meter reads 436 hours. Yanmar 194hp Tier 4f engine. 32" triple grouser pads, undercarriage is estimated at 95%. 2022 SP761 dangle head, 28" capacity. Feed wheels & knives are in good condition, no welding, measuring system is in working order. Warranty, owner operator. Forestry package. Heat, A/C, radio, LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northwest USA. |
Kobelco | 260 | 2022 |
$400,000
|
|
Kobelco SK200 Mark IV with Waratah 230HTH Processing Head2000 Kobelco SK200 Mark IV with Waratah 230HTH Processing Head. Hours are unknown. Mitsubishi engine. 24" triple grouser pads, undercarriage is estimated at 40%. Waratah 230HTH processing head is in good working order. Heat, A/C, lights, forestry package. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Kobelco | SK200 Mark IV | 2000 |
$34,500
|
|
Komatsu PC200 LC-6 with a ProPac 453 Delimber1999 Komatsu PC200 LC-6 with a ProPac 453 Delimber. Hour meter reads 20,000 hours. This equipment has a Komatsu engine, undercarriage is in fair condition but has never been changed, one owner. Has been a landing machine. Strong hydraulics and cylinders, pumps have been replaced, straight boom new 5,000 hours ago, new drive motor, new knives, tight pins and bushings, swing gear is in good working order, block heater, heat lights, A/C needs to be recharged. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 LC-6 | 1999 |
$45,900
|
|
Komatsu 200LC-6 with a Lim-Mit 2000B Delimber ***ON HOLD***1997 Komatsu 200LC-6 with a 1998 Lim-Mit 2000B Delimber. This machines main pump was replaced three years ago, newer Cummins 5.9 engine, undercarriage is in good condition, straight boom, delimber in good working condition. tight controls, good hoses, heat, and A/C. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. ***ON HOLD*** |
Komatsu | 200LC-6 | 1997 |
$35,900
|
|
Komatsu PC250 Carrier with a Limmit 2200B Delimber1994 Komatsu PC250 Carrier with a Limmit 2200B Delimber. This equipment has a Komatsu 6 cyl. engine. Owner stated this machine ran good when it was parked but may need a tune up, engine has been rebuilt, strong hydraulics has a few leaks, undercarriage is @ 40%, 28" triple grouser pads, straight boom has been re-enforced in a few spots, decent knives and grab arms, swing lock has been bypassed may need a wiring harness. Contact Erik @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | PC250 | 1994 |
$24,900
|
|
Komatsu PC200LC Processor with a Waratah HTH622B Head2005 Komatsu PC200LC Processor with a Waratah HTH622B Head. This machine has a Komatsu 6 cyl. engine, runs and starts good, strong hydraulics and cylinders, recent hydraulic pump, newer undercarriage, sprockets tracks, Waratah HTH622 B head has new computer and new module from Access Forestry, newer screen, heat, A/C, and lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Machine is located in Northeast USA. |
Komatsu | PC200LC | 2005 |
$79,500
|
|
Komatsu PC 200 LC-7 w/ Limmit 2000B Delimber2002 Komatsu PC 200 LC-7 with a Limmit 2000B Delimber. This machine has 14,440 total hours. runs and starts good, 1,650 hours on new hydraulic pump, all hydraulic cylinders resealed, welded line bored with new pins bushings throughout, heat & A/C. Tight, dry machine. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC 200 LC-7 | 2002 |
$35,000
|
|
Komatsu PC200 Delimber with a Risley 2000B Limit1998 Komatsu PC200 Delimber with a Risley 2000B Limit. This equipment runs and starts good, strong hydraulic and cylinders, straight boom, delimber is in good working order. Contact Erik @ Red Pine Equipment 218-720-0933. Machine is located in Northcentral USA. |
Komatsu | PC200 | 1998 |
$50,000
|
|
Komatsu XT445L with Log Max 7000XT Processing Head2022 Komatsu XT445L with Log Max 7000XT Processing Head. 24" single grouser pads, undercarriage is estimated at 90%. Warranty until November of 2024 or 5,000 hours. Komatsu care maintenance until November 2025 or 2,000 hours. Leveling system. Log Max 7000XT processing head is in good condition. Espar preheat system. Heat, A/C, radio, and LED lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northeast USA. |
Komatsu | XT445L | 2022 |
$625,000
|
|
Komatsu 890.3 Forwarder2011 Komatsu 890.3 8 Wheeled Forwarder. Hour meter reads 15,500 hours. One set of tracks are included. 750/55-26.5 tires are estimated at 75%. CRF 14 crane. Heat, A/C, radio, & lights. Contact Aaron @ Red Pine Equipment 218-720-0933. Equipment is located in Northcentral USA. |
Komatsu | 890.3 | 2011 |
$102,500
|